Author Topic: Basestation amplifier - but actually building one  (Read 80 times)

Offline Da_Stier

  • High Voltage Enthusiast
  • *
  • Posts: 24
  • Karma: +1/-0
    • View Profile
Basestation amplifier - but actually building one
« on: March 21, 2020, 06:59:51 PM »
Hi all,

since most topics in the RF section are about tearing base station amplifiers apart, I thought it might be interesting to do it the other way around and actually build one.
I decided to build a E-GSM Frontend about a year ago. Since then I collected a lot of parts and ideas.

Since Germany also has a Corona lockdown at the moment, I finally finished the build.

Maybe a little background on why I would build a GSM Frontend.
I am really interested in cellular communication and own several GSM Testsets, where most of them simulate the basestation, however one can actually simulate the end device.
This means, that I can safely run a GSM network, using the osmocom stack and a SDR transceiver without breaking any regulation or even sending anything, since everything is cable bound.

There is a block diagram of what I built:



I used a lot of recycled material for the build.
The case comes from a broken Ethernet switch, the fans are also from some broken network equipment and a lot of components are recycled.
Even the cables for wiring everything up are reused from an ATX power supply.
This is what I came up with:













The external power supply, I currently use is a modified HP server supply, giving me 12V at up to 60A.



The internal power supply is custom made for the unit.
It accepts anywhere between 9 to 24V DC on the input. It has a reverse polarity protection and error LED for that.
It generates 27V, 12V and 5V for the internal components.
Unter full load, the unit draws 15A at 12V.



The bargraph in the front shows the current current draw.
Each LED represents 1A. If more than 10A are drawn, it stays on 10A.
If the current draw is right between two steps, both LEDs are lit up.



 [ Invalid Attachment ]

The TX amplifier can output up to 30W.
The RX LNA is usable down to -120dBm of input power.

I hope this "reverse teardown" is of interest for some of you. :)

High Voltage Forum

Basestation amplifier - but actually building one
« on: March 21, 2020, 06:59:51 PM »

 


* Recent Topics and Posts

post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 04:15:12 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 01:05:28 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
SteveN87
Today at 12:53:15 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
April 07, 2020, 10:54:57 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
April 07, 2020, 10:24:16 PM
post Re: Class E SSTC Topology
[Solid State Tesla Coils (SSTC)]
ZakW
April 07, 2020, 09:22:16 PM
post Re: Class E SSTC Topology
[Solid State Tesla Coils (SSTC)]
johnf
April 07, 2020, 09:04:34 PM
post Re: Class E SSTC Topology
[Solid State Tesla Coils (SSTC)]
ZakW
April 07, 2020, 08:48:01 PM
post Re: Class E SSTC Topology
[Solid State Tesla Coils (SSTC)]
Weston
April 07, 2020, 08:15:43 PM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
John123
April 07, 2020, 06:23:47 PM
post Re: Where is plasma globe arc arcing to?
[Beginners]
John123
April 07, 2020, 05:59:09 PM
post Re: Where is plasma globe arc arcing to?
[Beginners]
alan sailer
April 07, 2020, 04:30:26 PM
post Re: Powerful easy to build MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
April 07, 2020, 01:10:30 PM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
SteveN87
April 07, 2020, 12:44:56 PM
post Re: Where is plasma globe arc arcing to?
[Beginners]
John123
April 07, 2020, 07:05:30 AM
post Re: Where is plasma globe arc arcing to?
[Beginners]
Jun
April 07, 2020, 06:40:02 AM
post Re: Class E SSTC Topology
[Solid State Tesla Coils (SSTC)]
ZakW
April 07, 2020, 05:07:31 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
John123
April 07, 2020, 03:38:12 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
SteveN87
April 07, 2020, 03:21:55 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
John123
April 07, 2020, 02:59:28 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
davekni
April 07, 2020, 02:52:19 AM
post Re: Small DIY plasma globe using ZVS oscillator
[Transformer (Ferrite Core)]
John123
April 07, 2020, 02:29:21 AM
post Re: Where is plasma globe arc arcing to?
[Beginners]
John123
April 07, 2020, 02:21:55 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
John123
April 07, 2020, 02:00:26 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
SteveN87
April 07, 2020, 01:25:47 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
John123
April 07, 2020, 12:38:59 AM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
petespaco
April 07, 2020, 12:13:11 AM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
John123
April 06, 2020, 10:07:59 PM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
davekni
April 06, 2020, 10:07:11 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
Mads Barnkob
April 06, 2020, 09:57:29 PM
post Re: TVS diode selection for 400v transistor
[Electronic Circuits]
John123
April 06, 2020, 08:04:52 PM
post Re: Power MOSFETs with fast recovery body diodes
[Electronic Circuits]
John123
April 06, 2020, 07:49:30 PM
post Re: Where is plasma globe arc arcing to?
[Beginners]
davekni
April 06, 2020, 06:30:24 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
April 06, 2020, 06:23:27 PM
post Where is plasma globe arc arcing to?
[Beginners]
Jun
April 06, 2020, 02:10:18 PM
post Re: Interuppter code help for sstc (LONEOCEANS SSTC2 )
[Solid State Tesla Coils (SSTC)]
Max
April 06, 2020, 10:21:47 AM
post Journey to a small stand alone CW signal synthesizer
[Radio Frequency]
Da_Stier
April 06, 2020, 09:56:07 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
April 06, 2020, 05:09:29 AM
post Re: Class E SSTC Topology
[Solid State Tesla Coils (SSTC)]
ZakW
April 06, 2020, 02:26:28 AM
post Re: Skm100 coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
oneKone
April 06, 2020, 02:16:56 AM
post Re: Portable Q(uarantine)CW Tesla Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
April 06, 2020, 12:43:50 AM
post Portable Q(uarantine)CW Tesla Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Weston
April 05, 2020, 10:47:07 PM
post Re: Unconventional 3kW SSTC
[Solid State Tesla Coils (SSTC)]
davekni
April 05, 2020, 10:46:48 PM
post Re: Interuppter code help for sstc (LONEOCEANS SSTC2 )
[Solid State Tesla Coils (SSTC)]
Max
April 05, 2020, 10:09:40 PM
post Re: Interuppter code help for sstc (LONEOCEANS SSTC2 )
[Solid State Tesla Coils (SSTC)]
ritaismyconscience
April 05, 2020, 09:55:33 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (Ferrite Core)]
davekni
April 05, 2020, 06:53:57 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
Uspring
April 05, 2020, 06:18:50 PM
post Interuppter code help for sstc (LONEOCEANS SSTC2 )
[Solid State Tesla Coils (SSTC)]
prabhatkumar
April 05, 2020, 05:20:57 PM
post Optical flatness inspection
[Light, Lasers and Optics]
klugesmith
April 05, 2020, 08:20:08 AM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
klugesmith
April 05, 2020, 07:49:27 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal