Author Topic: Small 65Kv X Ray Transformer hosuing build  (Read 648 times)

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Small 65Kv X Ray Transformer hosuing build
« on: December 14, 2019, 10:52:49 PM »
Hi All ,

Just wanted to share the small project I have worked on for a while now , my goal was to make small cases for the few x ray transformers I have so I can safely run them .

The transformer in use here is rated 230V Primary and 65Kv @ 8mA secondary .

The housing is made from  150 x 150 x 3mm aluminium box section , I tig welded a base and cut and welded the flange on the top .

Lid is made from polycarbonate , feed throughs are 16mm Diameter pure PTFE ( Teflon ) rods with a 3mm copper bar though the centre , this is then held in place to the lid with a nylon cable gland , both having a tight fit to minimize gaps  .

Transformer was vacuumed for 4 days under slight vibration in transformer grade mineral oil , The box is lined with 2mm Teflon sheet to help improve insulation between the case and wires .

Overall it turned out well : )




Offline ElectroXa

  • High Voltage Enthusiast
  • *
  • Posts: 27
  • Karma: +1/-0
    • View Profile
Re: Small 65Kv X Ray Transformer hosuing build
« Reply #1 on: December 17, 2019, 08:08:47 AM »
Hi
it's a nice project, I've a few questions:

what brand of tig welder did you use ?  (because I plan to weld aluminum to make xfmr case and others projects)
and where did you find this small transformer ?  :)

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Small 65Kv X Ray Transformer hosuing build
« Reply #2 on: December 18, 2019, 07:38:30 AM »
Thanks : ) ,

I have an oxford tig welder , I haven't used it much but its nice .

The transformer was from a small x ray head , they show up now and then online .

High Voltage Forum

Re: Small 65Kv X Ray Transformer hosuing build
« Reply #2 on: December 18, 2019, 07:38:30 AM »

 


* Recent Topics and Posts

post Re: Budget USB cameras
[High Speed Filming]
missoum0514
Today at 06:56:08 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
Today at 05:23:15 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
Today at 05:02:26 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
Today at 04:31:04 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
Today at 10:05:59 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
Today at 08:21:26 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 11:45:38 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 08:10:47 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
Uspring
August 02, 2020, 07:27:33 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
Uspring
August 02, 2020, 07:14:17 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 06:58:34 PM
post Re: current limiting to parallel resonance circuit
[Beginners]
davekni
August 02, 2020, 06:49:59 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 05:10:12 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 02, 2020, 04:55:14 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:20:13 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:05:12 PM
post Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 01:07:54 PM
post current limiting to parallel resonance circuit
[Beginners]
plasma
August 02, 2020, 07:13:54 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 02:26:11 AM
post Re: FPS1000HD unboxing and first impression
[High Speed Filming]
missoum0514
August 01, 2020, 11:57:24 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
TMaxElectronics
August 01, 2020, 10:24:21 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
klugesmith
August 01, 2020, 03:59:43 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 01, 2020, 06:22:53 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 07:32:09 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 06:15:27 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 05:38:49 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
klugesmith
July 31, 2020, 04:35:43 PM
post Re: MIDI videos from my DRSSTC1/2/3 demonstrations/shows
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 31, 2020, 02:33:48 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
July 31, 2020, 01:47:51 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
July 31, 2020, 10:51:47 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
July 31, 2020, 06:37:20 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
July 31, 2020, 04:11:14 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 02:33:30 AM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Halfcorp
July 31, 2020, 01:29:05 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 12:38:28 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
July 31, 2020, 12:13:43 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
johnf
July 30, 2020, 09:51:25 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 30, 2020, 09:50:16 PM
post How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
July 30, 2020, 02:05:39 PM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
July 30, 2020, 03:14:53 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 29, 2020, 10:00:44 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
July 29, 2020, 06:09:14 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
July 29, 2020, 12:52:24 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 29, 2020, 08:32:00 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 29, 2020, 05:23:35 AM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 29, 2020, 04:34:02 AM
post IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Halfcorp
July 29, 2020, 01:56:26 AM
post Re: my 4" coil turned to a 6" at 68"+ arcs
[Spark Gap Tesla Coils (SGTC)]
Bradselph
July 28, 2020, 10:33:09 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Halfcorp
July 28, 2020, 01:14:38 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
July 28, 2020, 01:11:56 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal