Author Topic: Blast from the past!  (Read 928 times)

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 207
  • Karma: +4/-0
  • Cedar Rapids, Iowa
    • View Profile
Blast from the past!
« on: September 17, 2019, 05:52:00 PM »
Here's a blast from the past. I've had this for a while. Anyone under the age of 50 may not recognize this. Before there was semiconductor RAM for memory, this is what computers used for fast working memory. This is called core storage. Each bit is stored in a tiny ferrite loop as a magnetic state. The ferrite loops are tiny, about 2 mm in diameter. These boards were assembled completely by hand!

Each loop has 3 wires passing through it for reading and writing data. The act of reading a bit actually erased it so the bit had to be re-writtten after reading! One advantage of core memory was that it was non-volatile.

This particular board contains 1600 ferrite loops thus it could store 1600 bits (200 bytes). It came from an IBM computer system. Not shown is the electronic drive and sense circuitry, made from discrete components, for reading and writing.
« Last Edit: September 17, 2019, 08:53:46 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1458
  • Karma: +24/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Blast from the past!
« Reply #1 on: September 17, 2019, 06:53:52 PM »
I assume you have this at home, do you know what computer it came from and do you have any other related parts?

Core memory history is really interesting as it was a leap in computation speed due to faster access times to data and just the shear power consumption reduction durings development shows a will to make it cheaper, smaller and more usable in all kinds of machines besides large main frames. https://en.wikipedia.org/wiki/Magnetic-core_memory
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 207
  • Karma: +4/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Blast from the past!
« Reply #2 on: September 17, 2019, 08:19:45 PM »
I do have it. My understanding is that it was used in the IBM 2821 control unit which was used to interface various peripherals to an IBM 360/370 computer. I don't have any other related parts. I would love to have a complete core memory module cube but they are very expensive. I would also love to have an IBM 360/370 control panel, but again, very rare and expensive.

My first computer was an Altair 8800 which I built from a kit in 1976. It was the very first personal computer. I sold it in the early 1980s for almost nothing. I wish that I still had it.
« Last Edit: September 17, 2019, 08:56:06 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 220
  • Karma: +5/-0
    • View Profile
Re: Blast from the past!
« Reply #3 on: September 18, 2019, 05:05:55 AM »
Very cool!  Let's see if I can find my own old core memory unit.

There are some modern core memory demonstrators that really work.  I wonder if their cores are old stock, made of material designed for data storage.  First hit of my search was corememoryshield.com.

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 325
  • Karma: +11/-0
    • View Profile
Re: Blast from the past!
« Reply #4 on: September 20, 2019, 11:32:35 PM »
On the topic of old computers and core memory, I have really enjoyed following this youtube channel, especially the restoration of the Apollo AGC computer:
https://www.youtube.com/channel/UC3bosUr3WlKYm4sBaLs-Adw

High Voltage Forum

Re: Blast from the past!
« Reply #4 on: September 20, 2019, 11:32:35 PM »

 


* Recent Topics and Posts

post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
Today at 02:12:16 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
Today at 01:04:06 AM
post Re: Moving to a new lab!
[Laboratories, Equipment and Tools]
profdc9
Today at 12:55:12 AM
post Re: Air Gap: why and how much?
[Transformer (Ferrite Core)]
profdc9
August 13, 2020, 10:59:27 PM
post Re: How about some Tesla Coil memes
[General Chat]
TMaxElectronics
August 13, 2020, 09:55:27 PM
post Re: Air Gap: why and how much?
[Transformer (Ferrite Core)]
johnf
August 13, 2020, 09:45:58 PM
post Re: Air Gap: why and how much?
[Transformer (Ferrite Core)]
klugesmith
August 13, 2020, 08:26:56 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
August 13, 2020, 07:02:24 PM
post Air Gap: why and how much?
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 13, 2020, 06:23:24 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 13, 2020, 06:15:16 PM
post Re: How about some Tesla Coil memes
[General Chat]
AstRii
August 13, 2020, 05:26:47 PM
post Re: First DRSSTC, No Sparks on Breakout
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
August 13, 2020, 05:25:43 PM
post Re: How about some Tesla Coil memes
[General Chat]
TMaxElectronics
August 13, 2020, 05:23:40 PM
post Re: First DRSSTC, No Sparks on Breakout
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
August 13, 2020, 05:23:37 PM
post Re: Bipolar high voltage multiplier project - more than 70cm hot arc discharge
[Voltage Multipliers]
kilovolt
August 13, 2020, 01:44:24 PM
post How about some Tesla Coil memes
[General Chat]
AstRii
August 13, 2020, 01:09:16 PM
post First DRSSTC, No Sparks on Breakout
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Yak
August 13, 2020, 12:41:06 PM
post Re: X-ray image intensifier
[X-ray]
AlexanderHun
August 13, 2020, 11:01:46 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 13, 2020, 02:09:13 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
davekni
August 12, 2020, 11:08:35 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
davekni
August 12, 2020, 10:49:52 PM
post Re: Moving to a new lab!
[Laboratories, Equipment and Tools]
Mads Barnkob
August 12, 2020, 10:30:54 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
August 12, 2020, 09:00:50 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
SteveN87
August 12, 2020, 07:16:43 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
August 12, 2020, 02:54:33 PM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
TMaxElectronics
August 12, 2020, 12:42:50 PM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
Twospoons
August 12, 2020, 12:23:58 PM
post Re: Single sided use of Xray XFMR
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 12, 2020, 11:15:07 AM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
davekni
August 12, 2020, 04:41:24 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
davekni
August 12, 2020, 04:06:09 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
TMaxElectronics
August 12, 2020, 01:58:47 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
Twospoons
August 12, 2020, 12:56:02 AM
post Charging a LiPo Battery with an LED driver
[Electronic Circuits]
TMaxElectronics
August 11, 2020, 11:24:18 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
August 11, 2020, 06:34:05 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 11, 2020, 04:19:01 AM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 11, 2020, 04:17:27 AM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 11, 2020, 04:10:34 AM
post Re: Single sided use of Xray XFMR
[Transformer (Ferrite Core)]
klugesmith
August 11, 2020, 03:33:02 AM
post Single sided use of Xray XFMR
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 10, 2020, 12:23:05 PM
post Re: XRay Tank- any ideas about what is inside
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 10, 2020, 12:18:04 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
johnf
August 10, 2020, 10:24:54 AM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
davekni
August 10, 2020, 06:20:04 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
RoadReaper
August 10, 2020, 05:40:19 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
August 10, 2020, 02:07:26 AM
post making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
August 10, 2020, 01:27:22 AM
post A Tesla coil and an antenna
[General Chat]
TheFreq
August 09, 2020, 09:02:32 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Steve Ward
August 08, 2020, 10:22:04 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
T3sl4co1l
August 08, 2020, 03:36:40 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
acmq
August 08, 2020, 02:07:52 AM
post Re: LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
LesWright
August 06, 2020, 10:20:12 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal