Author Topic: Homemade HV transformer  (Read 417 times)

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Homemade HV transformer
« on: September 14, 2019, 05:05:00 PM »
Hello!

I would like to ask you, who has made several high voltage transformers here? I was experimenting with television flyback transformers, it could produce a piece of 30kV. They can be connected in series but I want to make my own, my goal is at least 60kV. Do you think this is possible? Included are two forms of what ferrite core I found, so I should design a secondary one.




I drive with this switch ..

https://cdn.instructables.com/FSW/2MIC/GNBEVVKF/FSW2MICGNBEVVKF.LARGE.jpg?auto=webp&&frame=1

I have a 3d printer, I could print what I need, but unfortunately I haven't designed one yet. I will need to drive an X-ray tube, then I want to apply a voltage multiplier.



Offline ritaismyconscience

  • High Voltage Enthusiast
  • *
  • Posts: 14
  • Karma: +0/-0
    • View Profile
Re: Homemade HV transformer
« Reply #1 on: September 14, 2019, 06:35:32 PM »

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: Homemade HV transformer
« Reply #2 on: September 14, 2019, 06:43:15 PM »
Thanks! I don't see any specific electrical voltage, nor is it written by any person who built one. Do they measure voltage? I see a 14-20kV post, but it is very little for me

Offline ElectroXa

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Homemade HV transformer
« Reply #3 on: September 14, 2019, 07:01:28 PM »
Hi  :)

what core is in the picture ?
I have the same project, but with a lower voltage (20kV)

I suggest for the bobbin a milled HDPE cylinder because 3d printed coils have air bubble, so partial discharges can occur

cheers

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: Homemade HV transformer
« Reply #4 on: September 15, 2019, 10:39:29 AM »
Thanks for the help! I have a dental X-ray and I want to operate an X-ray tube. The question is how much tension to multiply, what do I manage to produce for myself.

Philips oralix dental x-ray head:


I usually do X-ray fluoroscopy videos, this is my own:

https://www.youtube.com/watch?v=3kqrlqLzQrE


The tube I want to operate requires 60kV:   (I'd like to operate this tube)



This is a "siemens röntgenkugel" x-ray tube




« Last Edit: September 15, 2019, 10:41:34 AM by AlexanderHun »

Offline davekni

  • High Voltage Experimenter
  • **
  • Posts: 79
  • Karma: +2/-0
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Homemade HV transformer
« Reply #5 on: September 16, 2019, 02:36:17 AM »
Presuming you need 60V DC, it's probably easier to use a somewhat-lower-voltage transformer and a voltage multiplier.  For my Marx generator, I wound a +-11kV transformer followed by a voltage multiplier to get +-22kV DC
David Knierim

High Voltage Forum

Re: Homemade HV transformer
« Reply #5 on: September 16, 2019, 02:36:17 AM »

 


* Recent Topics and Posts

post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
davekni
Today at 06:26:58 AM
post Re: Measuring permanent magnets
[Electronic circuits]
klugesmith
Today at 03:02:45 AM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
babass
November 16, 2019, 09:20:41 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
Mads Barnkob
November 16, 2019, 08:03:58 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
babass
November 16, 2019, 07:27:30 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
davekni
November 16, 2019, 06:55:16 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
thedoc298
November 16, 2019, 05:19:05 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
babass
November 16, 2019, 01:33:17 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
davekni
November 16, 2019, 04:56:44 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
November 16, 2019, 04:13:35 AM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
babass
November 16, 2019, 01:21:10 AM
post Re: coil Tesla in the space
[Dual Resonant Solid State Tesla coils]
Alexis
November 15, 2019, 08:14:00 PM
post Re: coil Tesla in the space
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
November 15, 2019, 05:40:33 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
November 15, 2019, 03:59:48 PM
post coil Tesla in the space
[Dual Resonant Solid State Tesla coils]
Alexis
November 15, 2019, 03:35:38 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
davekni
November 15, 2019, 05:18:19 AM
post SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
babass
November 14, 2019, 05:40:58 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
babass
November 14, 2019, 05:13:01 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
T3sl4co1l
November 14, 2019, 01:50:30 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
Uspring
November 14, 2019, 11:45:15 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
davekni
November 14, 2019, 05:35:19 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
November 14, 2019, 05:25:57 AM
post Re: How to measure voltage output of AC flyback transformer
[Transformer (ferrite core)]
davekni
November 14, 2019, 04:49:57 AM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
davekni
November 14, 2019, 04:32:50 AM
post Re: How to measure voltage output of AC flyback transformer
[Transformer (ferrite core)]
profdc9
November 13, 2019, 06:00:58 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
profdc9
November 13, 2019, 05:51:27 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
Mads Barnkob
November 13, 2019, 05:04:30 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
November 13, 2019, 03:57:53 PM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
bozidar
November 13, 2019, 09:08:45 AM
post Re: IR wavelength in photoelectric smoke detectors?
[Light, lasers and optics]
shrad
November 13, 2019, 08:24:10 AM
post Re: New to tesla coils, some questions before I start building a SSTC
[Solid state Tesla coils]
Weston
November 13, 2019, 07:06:38 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
davekni
November 13, 2019, 06:36:57 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
November 13, 2019, 06:01:47 AM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
davekni
November 13, 2019, 05:40:55 AM
post Re: IR wavelength in photoelectric smoke detectors?
[Light, lasers and optics]
klugesmith
November 13, 2019, 01:27:42 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
bozidar
November 13, 2019, 12:35:34 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
dexter
November 12, 2019, 11:08:44 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
November 12, 2019, 09:20:34 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
profdc9
November 12, 2019, 08:24:38 PM
post Re: IR wavelength in photoelectric smoke detectors?
[Light, lasers and optics]
johnf
November 12, 2019, 07:51:45 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
Weston
November 12, 2019, 07:39:00 PM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
bozidar
November 12, 2019, 06:44:36 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
November 12, 2019, 02:49:05 PM
post Re: IR wavelength in photoelectric smoke detectors?
[Light, lasers and optics]
Uspring
November 12, 2019, 02:21:38 PM
post Re: IR wavelength in photoelectric smoke detectors?
[Light, lasers and optics]
shrad
November 12, 2019, 08:38:39 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
davekni
November 12, 2019, 06:20:41 AM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
davekni
November 12, 2019, 06:02:30 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
November 12, 2019, 05:25:20 AM
post Re: IR wavelength in photoelectric smoke detectors?
[Light, lasers and optics]
davekni
November 12, 2019, 05:06:51 AM
post Re: New to tesla coils, some questions before I start building a SSTC
[Solid state Tesla coils]
Blin
November 11, 2019, 10:52:29 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30