Author Topic: Tungsten  (Read 331 times)

Offline thedoc298

  • High Voltage Experimenter
  • **
  • Posts: 69
  • Karma: +0/-0
    • View Profile
Tungsten
« on: August 24, 2019, 03:44:17 PM »
What size Tungsten are you guys using 1/4 1/8 3/8. Will be running 2k watt. Thanks

Forgot to say its a synchronous rotory.
« Last Edit: August 26, 2019, 03:35:54 AM by thedoc298 »

Offline MRMILSTAR

  • High Voltage Technician
  • ***
  • Posts: 154
  • Karma: +4/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Tungsten
« Reply #1 on: August 25, 2019, 06:05:52 AM »
Some people would say I'm way under-sized but I am using 1/8 " tungsten for the flying electrodes and 3/16 " for the stationary electrodes. My coil is pulling 6.5 KVA. After about 10 hours of run-time I see no discernible wear on the flying electrodes. The only wear that I see on the stationary electrodes is some rounding where it took the sharp edges off of the tips. No adjustment has been required.

I will say that I am using brass bolts to hold the flying electrodes. I also have little custom heat sinks for the stationary electrodes close to the tip. They look like vacuum tube anode cap heat sinks. Both of these help cool the electrodes.

The bottom line is that 1/8 " is plenty for 2 KVA.
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline thedoc298

  • High Voltage Experimenter
  • **
  • Posts: 69
  • Karma: +0/-0
    • View Profile
Re: Tungsten
« Reply #2 on: August 26, 2019, 03:34:03 AM »
Some people would say I'm way under-sized but I am using 1/8 " tungsten for the flying electrodes and 3/16 " for the stationary electrodes. My coil is pulling 6.5 KVA. After about 10 hours of run-time I see no discernible wear on the flying electrodes. The only wear that I see on the stationary electrodes is some rounding where it took the sharp edges off of the tips. No adjustment has been required.

I will say that I am using brass bolts to hold the flying electrodes. I also have little custom heat sinks for the stationary electrodes close to the tip. They look like vacuum tube anode cap heat sinks. Both of these help cool the electrodes.

The bottom line is that 1/8 " is plenty for 2 KVA.


Thanks again, real parameter are good enough for me.

High Voltage Forum

Re: Tungsten
« Reply #2 on: August 26, 2019, 03:34:03 AM »

 


* Recent Topics and Posts

post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
Today at 02:44:44 PM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
Today at 07:21:13 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 06:11:32 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 04:42:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
davekni
Today at 04:37:53 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
Today at 04:28:33 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
Today at 04:21:31 AM
post GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 02:41:03 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
Today at 12:28:20 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 20, 2020, 09:45:21 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 20, 2020, 07:28:01 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Uspring
February 20, 2020, 02:06:26 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
shrad
February 20, 2020, 10:38:01 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
davekni
February 20, 2020, 05:14:43 AM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
davekni
February 20, 2020, 05:04:50 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
klugesmith
February 20, 2020, 04:47:41 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 07:29:23 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:47:55 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:45:23 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Teravolt
February 19, 2020, 06:41:42 PM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
John123
February 19, 2020, 06:10:34 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
MRMILSTAR
February 19, 2020, 05:52:20 PM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
ElectroXa
February 19, 2020, 05:05:50 PM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
John123
February 19, 2020, 04:11:22 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Uspring
February 19, 2020, 02:03:12 PM
post Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
warmania
February 19, 2020, 11:24:58 AM
post Re: HP T620 Thin Client - PSU Hack And Windows PC Modification
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
latethannever
February 19, 2020, 11:00:15 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
rikkitikkitavi
February 19, 2020, 10:43:13 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:54:14 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
klugesmith
February 19, 2020, 06:51:52 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
davekni
February 19, 2020, 03:53:13 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
ElectroXa
February 18, 2020, 09:44:25 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
MRMILSTAR
February 18, 2020, 09:34:06 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 18, 2020, 08:27:31 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Weston
February 18, 2020, 07:55:14 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 18, 2020, 07:32:04 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
klugesmith
February 18, 2020, 05:58:39 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
MRMILSTAR
February 18, 2020, 05:16:55 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 18, 2020, 04:19:37 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Mads Barnkob
February 18, 2020, 04:12:11 PM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 18, 2020, 01:25:06 PM
post Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 18, 2020, 10:40:58 AM
post Re: How can I make my driver better
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
February 18, 2020, 09:02:23 AM
post Re: DIY 250W LED Flood Light for High Speed Filming
[Light, Lasers and Optics]
Mads Barnkob
February 18, 2020, 08:58:38 AM
post Re: Doorknob vs Ceramic Disk
[Voltage Multipliers]
davekni
February 18, 2020, 05:33:22 AM
post Re: DIY 250W LED Flood Light for High Speed Filming
[Light, Lasers and Optics]
davekni
February 18, 2020, 05:08:28 AM
post How can I make my driver better
[Solid State Tesla Coils (SSTC)]
Irido
February 18, 2020, 04:45:06 AM
post Re: DIY 250W LED Flood Light for High Speed Filming
[Light, Lasers and Optics]
klugesmith
February 18, 2020, 02:44:42 AM
post Re: HP T620 Thin Client - PSU Hack And Windows PC Modification
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
latethannever
February 18, 2020, 01:58:48 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 17, 2020, 11:30:03 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal