Author Topic: Van de Graaf is leaking charge  (Read 68 times)

Offline Patric

  • High Voltage Enthusiast
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Van de Graaf is leaking charge
« on: August 14, 2019, 09:22:21 AM »
Dear all,
my Van de Graaf had been working flawlessly. I was able to pull 40cm coronal discharges from it.
Here is a long exposure:



The column is made from 160mm diameter PVC pipe.



After half a year of non operation I brought it back to life and I now have some severe problems. When it starts up it nicely charges the top load as usual, but after about 30 secs there is charge leaking from the column. In the dark you can clearly see several jets coming out of the side of the column. The origins of the jets seem to be arranged along a line parallel to the column. I cannot take pictures but here is a sketch:



I already checked in the outside and inside of the column for any contamination or damages. Nothing, all looks smooth. Really scratching my head about this.
The column is a sandwich from PVC and foam. Looks like this:



If anyone has got some ideas, let me know!

Cheers Patric

Offline ElectroXa

  • High Voltage Enthusiast
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Van de Graaf is leaking charge
« Reply #1 on: August 14, 2019, 01:42:21 PM »
Was the Van de graaf stored in a moist place?
Because the foam can retain moisture, so it becomes conductive and thus cause current leaks.

Offline Patric

  • High Voltage Enthusiast
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Van de Graaf is leaking charge
« Reply #2 on: August 14, 2019, 02:56:49 PM »
Was the Van de graaf stored in a moist place?
Because the foam can retain moisture, so it becomes conductive and thus cause current leaks.

No not really, always sat in the workshop which is not humid. (ok, the laundry room is next door...  ???)
I will take it apart and try to dry it, maybe run the hair dryer for some time.

My next VDG is planned to feature a transparent acrylic column. Those shouldnt be prone to take on moisture.

High Voltage Forum

Re: Van de Graaf is leaking charge
« Reply #2 on: August 14, 2019, 02:56:49 PM »

 


* Recent Topics and Posts

post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
Today at 10:45:26 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
Today at 06:21:45 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
Today at 12:59:20 AM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
fnordest
Today at 12:18:48 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:34:46 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
Mads Barnkob
August 16, 2019, 10:26:19 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:19:18 PM
post Re: [Development] Project of an SSTC driver.
[Solid state Tesla coils]
Mads Barnkob
August 16, 2019, 10:07:31 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
T3sl4co1l
August 16, 2019, 09:28:35 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
ElectroXa
August 16, 2019, 09:17:04 PM
post Re: ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
T3sl4co1l
August 16, 2019, 09:14:36 PM
post ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
Mads Barnkob
August 16, 2019, 08:03:18 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 16, 2019, 01:49:53 PM
post Suitable capacitors and switches? 10kV
[Capacitor banks]
MrFox
August 16, 2019, 12:21:36 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 16, 2019, 11:22:45 AM
post Re: Small Phase change build R600a
[General chatting]
DashApple
August 15, 2019, 06:23:40 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
rikkitikkitavi
August 15, 2019, 06:17:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 15, 2019, 01:51:04 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 14, 2019, 07:05:57 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
August 14, 2019, 03:42:34 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 02:56:49 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
ElectroXa
August 14, 2019, 01:42:21 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 14, 2019, 12:53:10 PM
post Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 09:22:21 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 14, 2019, 04:39:11 AM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 13, 2019, 07:10:31 PM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
MRMILSTAR
August 13, 2019, 05:17:23 AM
post MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 12, 2019, 09:54:35 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 12, 2019, 08:40:16 PM
post Re: Small Phase change build R600a
[General chatting]
Hydron
August 12, 2019, 07:27:23 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
klugesmith
August 12, 2019, 09:18:15 AM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
shrad
August 12, 2019, 09:06:34 AM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
klugesmith
August 12, 2019, 09:02:38 AM
post Re: A problem solved with hand tools
[General chatting]
klugesmith
August 12, 2019, 08:29:20 AM
post Re: Ebay [US]: MITSUBISHI CM300 1200V-300A IGBT (30$ a piece)
[Sell / Buy / Trade]
oneKone
August 12, 2019, 05:25:24 AM
post Re: Ebay [US]: MITSUBISHI CM300 1200V-300A IGBT (30$ a piece)
[Sell / Buy / Trade]
acobaugh
August 10, 2019, 08:14:35 PM
post Re: 30% power increase
[Spark gap Tesla coils]
MRMILSTAR
August 08, 2019, 04:18:09 PM
post Re: "LightningStorm" VTTC project
[Vacuum tube Tesla coils]
Bambinz
August 08, 2019, 01:15:11 PM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
Bambinz
August 08, 2019, 12:15:26 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Bambinz
August 08, 2019, 11:58:47 AM
post Re: [Development] Project of an SSTC driver.
[Solid state Tesla coils]
Bambinz
August 08, 2019, 11:56:51 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
August 08, 2019, 10:04:39 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 08, 2019, 08:35:57 AM
post Re: 30% power increase
[Spark gap Tesla coils]
Mads Barnkob
August 08, 2019, 08:33:01 AM
post Re: Using R/C motors as 3 phase generators.
[General chatting]
Patrick
August 07, 2019, 09:16:57 PM
post Re: Using R/C motors as 3 phase generators.
[General chatting]
shrad
August 07, 2019, 01:15:46 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 07, 2019, 02:32:25 AM
post 30% power increase
[Spark gap Tesla coils]
MRMILSTAR
August 06, 2019, 04:35:37 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
fnordest
August 06, 2019, 10:56:30 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 06, 2019, 05:11:10 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30