Author Topic: Small Phase change build R600a  (Read 529 times)

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Small Phase change build R600a
« on: August 05, 2019, 06:16:35 PM »
Hi All .

This was my first attempt at building a small phase change system and want to share the results

There was no real gain to be made from this on the CPU other than for the building experience : ) .
Specs are -

Secop 30AA 3cc R600a compressor
2.8m 0.8mm Capillary tube .
120mm 13W AC fan and 120x120x50mm condenser .
CPU is a i5 3470 ( around 85 - 90W Load )


The evaporator is a copper plate with 1/4" copper pipe coiled and brazed to it .  Under no load evap is -6C , Low side is 1PSI ( -10C Boiling point on R600a ) , Suction line 6" from compressor is -1 to -2 C so superheat is around 8C under no load .


Loaded 100% the temperatures are -1C to 0C evap and 18C reported by the CPU .


PCB is full coated in varnish on both side around and under the CPU socket , Then filled with silicone grease and lined around it with armaflex insulation ( still need to do some more insulating ) .


Not the best looking but i am happy with the results for a first attempt : ) .

IMG_20190805_132413 by TwirlyWhirly555, on Flickr

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 294
  • Karma: +9/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #1 on: August 12, 2019, 07:27:23 PM »
Wow, missed this thread before - looks like quite a fun and successful first build! I'd love to have the knowledge and time to build something like this - I remember reading some very interesting threads years ago (on Xtreme systems or something) about people building multi stage phase change systems, so it seems the rabbit hole goes a bit deeper yet.

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #2 on: August 15, 2019, 06:23:40 PM »
Thanks : ) , There was a few issues to get through but in the end it turned out well .

Xtreme systems was and still is a very good place to go for phase change , there is a massive section full of builds and info threads , alot of what i learned was from there : ) .


Some of the cascade and auto cascades on there are crazy , I too would love to be able to do that but for now the simple single stage is where i will probably stay .

Offline klugesmith

  • High Voltage Technician
  • ***
  • Posts: 131
  • Karma: +5/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #3 on: August 26, 2019, 06:19:05 AM »
Very nice.
Is "Phase change" a buzz word these days, for a way to cool overclocked CPU's?  Does pressurized refrigerant circulate inside heat-sink parts and boil right there?

Online Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1267
  • Karma: +18/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Small Phase change build R600a
« Reply #4 on: August 26, 2019, 03:32:48 PM »
Very nice.
Is "Phase change" a buzz word these days, for a way to cool overclocked CPU's?  Does pressurized refrigerant circulate inside heat-sink parts and boil right there?

Seems to be a buzz word for a vapor compression cycle that is carried out by a refrigerant system: https://www.es.aau.dk/sections-labs/Automation-and-Control/Laboratory+facilities/refrigeration/refrigeration-cycle/
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Small Phase change build R600a
« Reply #4 on: August 26, 2019, 03:32:48 PM »

 


* Recent Topics and Posts

post Re: Unusually long-lived electrolytic capacitor
[Electronic Circuits]
ritaismyconscience
Today at 06:08:05 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 05:55:55 AM
post Re: Unusually long-lived electrolytic capacitor
[Electronic Circuits]
T3sl4co1l
Today at 05:51:48 AM
post Unusually long-lived electrolytic capacitor
[Electronic Circuits]
MRMILSTAR
Today at 05:43:34 AM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 25, 2020, 01:26:37 PM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
dj.cosmo.esq
February 25, 2020, 01:05:01 PM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 25, 2020, 12:35:06 PM
post Re: FPS4000
[High Speed Filming]
Mads Barnkob
February 25, 2020, 11:29:58 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
February 25, 2020, 08:28:28 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 25, 2020, 06:27:40 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 25, 2020, 06:20:04 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 25, 2020, 04:23:50 AM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
February 24, 2020, 02:53:13 PM
post Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 24, 2020, 02:38:29 PM
post Re: NST
[Spark Gap Tesla Coils (SGTC)]
Jun
February 24, 2020, 02:30:28 PM
post FPS4000
[High Speed Filming]
Hoser415
February 24, 2020, 02:21:50 PM
post Re: HP T620 thin to plus conversion....
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
February 24, 2020, 09:09:33 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 24, 2020, 07:08:30 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 24, 2020, 04:37:33 AM
post Re: DIY 250W LED Flood Light for High Speed Filming
[Light, Lasers and Optics]
Mads Barnkob
February 23, 2020, 09:04:34 PM
post HP T620 thin to plus conversion....
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
spacecabbie
February 23, 2020, 02:03:15 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 23, 2020, 05:43:17 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 23, 2020, 04:07:51 AM
post Finding accelerometer location inside a phone
[Smart Phones]
haversin
February 22, 2020, 07:23:28 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dj.cosmo.esq
February 22, 2020, 07:41:18 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 22, 2020, 06:49:22 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 22, 2020, 03:39:10 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 22, 2020, 02:32:55 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 22, 2020, 02:10:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 22, 2020, 01:27:41 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
February 21, 2020, 08:00:10 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
February 21, 2020, 02:44:44 PM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 21, 2020, 07:21:13 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 21, 2020, 06:11:32 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 21, 2020, 04:42:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
davekni
February 21, 2020, 04:37:53 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 21, 2020, 04:28:33 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 21, 2020, 04:21:31 AM
post GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 21, 2020, 02:41:03 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 21, 2020, 12:28:20 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 20, 2020, 09:45:21 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 20, 2020, 07:28:01 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Uspring
February 20, 2020, 02:06:26 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
shrad
February 20, 2020, 10:38:01 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
davekni
February 20, 2020, 05:14:43 AM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
davekni
February 20, 2020, 05:04:50 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
klugesmith
February 20, 2020, 04:47:41 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 07:29:23 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:47:55 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:45:23 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal