Author Topic: Small Phase change build R600a  (Read 93 times)

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Small Phase change build R600a
« on: August 05, 2019, 06:16:35 PM »
Hi All .

This was my first attempt at building a small phase change system and want to share the results

There was no real gain to be made from this on the CPU other than for the building experience : ) .
Specs are -

Secop 30AA 3cc R600a compressor
2.8m 0.8mm Capillary tube .
120mm 13W AC fan and 120x120x50mm condenser .
CPU is a i5 3470 ( around 85 - 90W Load )


The evaporator is a copper plate with 1/4" copper pipe coiled and brazed to it .  Under no load evap is -6C , Low side is 1PSI ( -10C Boiling point on R600a ) , Suction line 6" from compressor is -1 to -2 C so superheat is around 8C under no load .


Loaded 100% the temperatures are -1C to 0C evap and 18C reported by the CPU .


PCB is full coated in varnish on both side around and under the CPU socket , Then filled with silicone grease and lined around it with armaflex insulation ( still need to do some more insulating ) .


Not the best looking but i am happy with the results for a first attempt : ) .

IMG_20190805_132413 by TwirlyWhirly555, on Flickr

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 242
  • Karma: +7/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #1 on: August 12, 2019, 07:27:23 PM »
Wow, missed this thread before - looks like quite a fun and successful first build! I'd love to have the knowledge and time to build something like this - I remember reading some very interesting threads years ago (on Xtreme systems or something) about people building multi stage phase change systems, so it seems the rabbit hole goes a bit deeper yet.

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #2 on: August 15, 2019, 06:23:40 PM »
Thanks : ) , There was a few issues to get through but in the end it turned out well .

Xtreme systems was and still is a very good place to go for phase change , there is a massive section full of builds and info threads , alot of what i learned was from there : ) .


Some of the cascade and auto cascades on there are crazy , I too would love to be able to do that but for now the simple single stage is where i will probably stay .

High Voltage Forum

Re: Small Phase change build R600a
« Reply #2 on: August 15, 2019, 06:23:40 PM »

 


* Recent Topics and Posts

post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
Today at 10:45:26 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
Today at 06:21:45 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
Today at 12:59:20 AM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
fnordest
Today at 12:18:48 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:34:46 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
Mads Barnkob
August 16, 2019, 10:26:19 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:19:18 PM
post Re: [Development] Project of an SSTC driver.
[Solid state Tesla coils]
Mads Barnkob
August 16, 2019, 10:07:31 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
T3sl4co1l
August 16, 2019, 09:28:35 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
ElectroXa
August 16, 2019, 09:17:04 PM
post Re: ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
T3sl4co1l
August 16, 2019, 09:14:36 PM
post ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
Mads Barnkob
August 16, 2019, 08:03:18 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 16, 2019, 01:49:53 PM
post Suitable capacitors and switches? 10kV
[Capacitor banks]
MrFox
August 16, 2019, 12:21:36 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 16, 2019, 11:22:45 AM
post Re: Small Phase change build R600a
[General chatting]
DashApple
August 15, 2019, 06:23:40 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
rikkitikkitavi
August 15, 2019, 06:17:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 15, 2019, 01:51:04 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 14, 2019, 07:05:57 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
August 14, 2019, 03:42:34 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 02:56:49 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
ElectroXa
August 14, 2019, 01:42:21 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 14, 2019, 12:53:10 PM
post Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 09:22:21 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 14, 2019, 04:39:11 AM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 13, 2019, 07:10:31 PM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
MRMILSTAR
August 13, 2019, 05:17:23 AM
post MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 12, 2019, 09:54:35 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 12, 2019, 08:40:16 PM
post Re: Small Phase change build R600a
[General chatting]
Hydron
August 12, 2019, 07:27:23 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
klugesmith
August 12, 2019, 09:18:15 AM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
shrad
August 12, 2019, 09:06:34 AM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
klugesmith
August 12, 2019, 09:02:38 AM
post Re: A problem solved with hand tools
[General chatting]
klugesmith
August 12, 2019, 08:29:20 AM
post Re: Ebay [US]: MITSUBISHI CM300 1200V-300A IGBT (30$ a piece)
[Sell / Buy / Trade]
oneKone
August 12, 2019, 05:25:24 AM
post Re: Ebay [US]: MITSUBISHI CM300 1200V-300A IGBT (30$ a piece)
[Sell / Buy / Trade]
acobaugh
August 10, 2019, 08:14:35 PM
post Re: 30% power increase
[Spark gap Tesla coils]
MRMILSTAR
August 08, 2019, 04:18:09 PM
post Re: "LightningStorm" VTTC project
[Vacuum tube Tesla coils]
Bambinz
August 08, 2019, 01:15:11 PM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
Bambinz
August 08, 2019, 12:15:26 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Bambinz
August 08, 2019, 11:58:47 AM
post Re: [Development] Project of an SSTC driver.
[Solid state Tesla coils]
Bambinz
August 08, 2019, 11:56:51 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
August 08, 2019, 10:04:39 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 08, 2019, 08:35:57 AM
post Re: 30% power increase
[Spark gap Tesla coils]
Mads Barnkob
August 08, 2019, 08:33:01 AM
post Re: Using R/C motors as 3 phase generators.
[General chatting]
Patrick
August 07, 2019, 09:16:57 PM
post Re: Using R/C motors as 3 phase generators.
[General chatting]
shrad
August 07, 2019, 01:15:46 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 07, 2019, 02:32:25 AM
post 30% power increase
[Spark gap Tesla coils]
MRMILSTAR
August 06, 2019, 04:35:37 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
fnordest
August 06, 2019, 10:56:30 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 06, 2019, 05:11:10 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30