Author Topic: Small Phase change build R600a  (Read 457 times)

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Small Phase change build R600a
« on: August 05, 2019, 06:16:35 PM »
Hi All .

This was my first attempt at building a small phase change system and want to share the results

There was no real gain to be made from this on the CPU other than for the building experience : ) .
Specs are -

Secop 30AA 3cc R600a compressor
2.8m 0.8mm Capillary tube .
120mm 13W AC fan and 120x120x50mm condenser .
CPU is a i5 3470 ( around 85 - 90W Load )


The evaporator is a copper plate with 1/4" copper pipe coiled and brazed to it .  Under no load evap is -6C , Low side is 1PSI ( -10C Boiling point on R600a ) , Suction line 6" from compressor is -1 to -2 C so superheat is around 8C under no load .


Loaded 100% the temperatures are -1C to 0C evap and 18C reported by the CPU .


PCB is full coated in varnish on both side around and under the CPU socket , Then filled with silicone grease and lined around it with armaflex insulation ( still need to do some more insulating ) .


Not the best looking but i am happy with the results for a first attempt : ) .

IMG_20190805_132413 by TwirlyWhirly555, on Flickr

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 287
  • Karma: +8/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #1 on: August 12, 2019, 07:27:23 PM »
Wow, missed this thread before - looks like quite a fun and successful first build! I'd love to have the knowledge and time to build something like this - I remember reading some very interesting threads years ago (on Xtreme systems or something) about people building multi stage phase change systems, so it seems the rabbit hole goes a bit deeper yet.

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #2 on: August 15, 2019, 06:23:40 PM »
Thanks : ) , There was a few issues to get through but in the end it turned out well .

Xtreme systems was and still is a very good place to go for phase change , there is a massive section full of builds and info threads , alot of what i learned was from there : ) .


Some of the cascade and auto cascades on there are crazy , I too would love to be able to do that but for now the simple single stage is where i will probably stay .

Offline klugesmith

  • High Voltage Technician
  • ***
  • Posts: 113
  • Karma: +5/-0
    • View Profile
Re: Small Phase change build R600a
« Reply #3 on: August 26, 2019, 06:19:05 AM »
Very nice.
Is "Phase change" a buzz word these days, for a way to cool overclocked CPU's?  Does pressurized refrigerant circulate inside heat-sink parts and boil right there?

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1232
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Small Phase change build R600a
« Reply #4 on: August 26, 2019, 03:32:48 PM »
Very nice.
Is "Phase change" a buzz word these days, for a way to cool overclocked CPU's?  Does pressurized refrigerant circulate inside heat-sink parts and boil right there?

Seems to be a buzz word for a vapor compression cycle that is carried out by a refrigerant system: https://www.es.aau.dk/sections-labs/Automation-and-Control/Laboratory+facilities/refrigeration/refrigeration-cycle/
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Small Phase change build R600a
« Reply #4 on: August 26, 2019, 03:32:48 PM »

 


* Recent Topics and Posts

post Small DIY plasma globe using ZVS oscillator
[Transformer (Ferrite Core)]
davekni
Today at 06:21:31 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
Today at 05:54:17 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
Today at 05:45:43 AM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Twospoons
January 21, 2020, 10:54:44 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mads Barnkob
January 21, 2020, 08:05:20 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mysteriousduck
January 21, 2020, 03:49:24 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mads Barnkob
January 21, 2020, 08:37:14 AM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
klugesmith
January 20, 2020, 11:10:05 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
T3sl4co1l
January 20, 2020, 10:55:35 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
davekni
January 20, 2020, 09:48:06 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Twospoons
January 20, 2020, 08:31:54 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
SteveN87
January 20, 2020, 12:59:19 PM
post DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mads Barnkob
January 20, 2020, 11:13:23 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
HVZapp
January 20, 2020, 10:23:03 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
January 20, 2020, 05:55:07 AM
post Re: Why does this happen.
[General Chat]
thedoc298
January 19, 2020, 09:43:26 PM
post Re: Why does this happen.
[General Chat]
Mads Barnkob
January 19, 2020, 09:07:51 PM
post JavaTC question
[General Chat]
thedoc298
January 19, 2020, 09:01:06 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
January 19, 2020, 01:08:17 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
January 19, 2020, 12:36:56 PM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
Mysteriousduck
January 19, 2020, 04:06:36 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
rvpilot
January 19, 2020, 02:00:30 AM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
T3sl4co1l
January 18, 2020, 08:51:26 PM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
klugesmith
January 18, 2020, 06:53:02 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Mysteriousduck
January 18, 2020, 05:19:49 AM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
Mysteriousduck
January 18, 2020, 04:41:22 AM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
T3sl4co1l
January 18, 2020, 12:30:19 AM
post 500Khz Induction Heater - Need help with Driver
[Beginners]
Mysteriousduck
January 17, 2020, 11:17:33 PM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
klugesmith
January 17, 2020, 08:55:37 PM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
T3sl4co1l
January 17, 2020, 04:01:23 PM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
RobertL
January 17, 2020, 04:22:25 AM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
Twospoons
January 17, 2020, 01:37:37 AM
post Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
RobertL
January 16, 2020, 11:51:51 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Netzpfuscher
January 16, 2020, 11:59:04 AM
post Re: Easy Oscillator for Induction Heating and, Maybe Tesla Coil Power?
[Electronic Circuits]
T3sl4co1l
January 16, 2020, 02:53:32 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
January 15, 2020, 08:57:37 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 15, 2020, 07:27:10 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
January 15, 2020, 07:08:00 PM
post Re: Easy Oscillator for Induction Heating and, Maybe Tesla Coil Power?
[Electronic Circuits]
Mads Barnkob
January 15, 2020, 01:26:57 PM
post Re: Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
SteveN87
January 15, 2020, 12:37:28 PM
post Re: Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
Twospoons
January 15, 2020, 01:15:45 AM
post Easy Oscillator for Induction Heating and, Maybe Tesla Coil Power?
[Electronic Circuits]
petespaco
January 14, 2020, 11:19:23 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Nicko
January 14, 2020, 10:50:54 PM
post Ebay [US] 1x CM300HA-24H H-series, 20$ for a single switch brick
[Sell / Buy / Trade]
Mads Barnkob
January 14, 2020, 08:24:10 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
T3sl4co1l
January 14, 2020, 07:36:14 PM
post Re: Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
shrad
January 14, 2020, 12:51:32 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
davekni
January 14, 2020, 05:27:11 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
January 14, 2020, 02:27:54 AM
post Re: Ok now I'm stuck ¯\_(ツ)_/¯
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dj.cosmo.esq
January 13, 2020, 11:42:07 PM
post Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
Mads Barnkob
January 13, 2020, 11:30:11 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal