Author Topic: Using R/C motors as 3 phase generators.  (Read 284 times)

Offline Patrick

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Using R/C motors as 3 phase generators.
« on: July 31, 2019, 01:39:51 AM »
Ive really been looking in to 1/8 scale motors, which I have 2 to experiment with. But unlike alternators that can be regulated via field coil intensity the motors are fixed and must vary with great complexity between natural volts per Kv and current from a rising or falling electrical load.


So can I let a wise fixed gear ratio and buck/boost PS to smooth out the apparent impedance and current throttle posistion ? Have the SMPS be the CVT transmission so to speak.

Is this possible ?

Offline shrad

  • High Voltage Enthusiast
  • *
  • Posts: 29
  • Karma: +0/-0
    • View Profile
Re: Using R/C motors as 3 phase generators.
« Reply #1 on: August 07, 2019, 01:15:46 PM »
Hi Patrick

I guess this is the principle behind regenerative breaking as this is done via the same motor as propulsion in electric cars, and the load behind the converter should also vary quite widely upon the driving conditions... maybe you'll find some papers on that

I also need to test some ideas on 3 phase generators for bike power, but this is maturing in my head, no time for that right now :(

Offline Patrick

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: Using R/C motors as 3 phase generators.
« Reply #2 on: August 07, 2019, 09:16:57 PM »
yes your right, pdfs' of that nature are where ill look next.

High Voltage Forum

Re: Using R/C motors as 3 phase generators.
« Reply #2 on: August 07, 2019, 09:16:57 PM »

 


* Recent Topics and Posts

post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
AndreiRS
Today at 03:59:49 AM
post How do you keep in contact with forum people...?
[General chatting]
AndreiRS
Today at 03:23:31 AM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
klugesmith
Today at 12:16:53 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
December 12, 2019, 08:35:24 PM
post Re: How To Make a Stencil For Spray Paint With Cheap Hand Tools
[General chatting]
johnf
December 12, 2019, 07:53:35 PM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
John123
December 12, 2019, 02:52:58 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
John123
December 12, 2019, 02:42:19 PM
post Re: Full bridge much "weaker" than half bridge?
[Solid state Tesla coils]
nick
December 12, 2019, 11:17:36 AM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
davekni
December 12, 2019, 04:51:08 AM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
davekni
December 12, 2019, 04:26:22 AM
post Re: How To Make a Stencil For Spray Paint With Cheap Hand Tools
[General chatting]
AndreiRS
December 12, 2019, 01:21:35 AM
post Re: Using same winding on separate rails?
[Transformer (iron core)]
Twospoons
December 11, 2019, 10:49:04 PM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Uspring
December 11, 2019, 05:28:46 PM
post Re: Full bridge much "weaker" than half bridge?
[Solid state Tesla coils]
Fumeaux
December 11, 2019, 03:11:42 PM
post Re: Royer oscillator (ZVS) driven Jacob's ladder, E80 core transformer
[Transformer (ferrite core)]
John123
December 11, 2019, 02:22:10 PM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
John123
December 11, 2019, 02:09:19 PM
post Full bridge much "weaker" than half bridge?
[Solid state Tesla coils]
nick
December 11, 2019, 01:10:57 PM
post Re: Possible use for large inductor (laminated core)
[Transformer (iron core)]
kamelryttarn
December 11, 2019, 08:48:36 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
December 11, 2019, 06:08:48 AM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
davekni
December 11, 2019, 05:38:17 AM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
davekni
December 11, 2019, 05:01:31 AM
post Re: Using same winding on separate rails?
[Transformer (iron core)]
John123
December 11, 2019, 01:52:43 AM
post Re: Using same winding on separate rails?
[Transformer (iron core)]
klugesmith
December 11, 2019, 01:41:04 AM
post Re: Worlds Weirdest Microwave Oven, From A Weapons Factory - The Husqvarna Cupol
[Transformer (iron core)]
klugesmith
December 11, 2019, 01:37:13 AM
post Re: Using same winding on separate rails?
[Transformer (iron core)]
John123
December 11, 2019, 01:19:58 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
December 11, 2019, 01:14:32 AM
post Re: Using same winding on separate rails?
[Transformer (iron core)]
klugesmith
December 11, 2019, 01:04:08 AM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid state Tesla coils]
babass
December 10, 2019, 11:24:50 PM
post Using same winding on separate rails?
[Transformer (iron core)]
John123
December 10, 2019, 10:52:50 PM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
John123
December 10, 2019, 03:35:40 PM
post Re: Why did 4HV die??
[General chatting]
John123
December 10, 2019, 03:21:07 PM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
Mads Barnkob
December 10, 2019, 03:04:28 PM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
John123
December 10, 2019, 02:57:45 PM
post Re: Possible use for large inductor (laminated core)
[Transformer (iron core)]
kamelryttarn
December 10, 2019, 11:23:48 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
Mads Barnkob
December 10, 2019, 10:27:54 AM
post Re: Worlds Weirdest Microwave Oven, From A Weapons Factory - The Husqvarna Cupol
[Transformer (iron core)]
Mads Barnkob
December 10, 2019, 10:20:17 AM
post Re: Possible use for large inductor (laminated core)
[Transformer (iron core)]
Mads Barnkob
December 10, 2019, 10:16:32 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
December 10, 2019, 06:04:28 AM
post Re: Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
davekni
December 10, 2019, 05:28:54 AM
post Re: Possible use for large inductor (laminated core)
[Transformer (iron core)]
davekni
December 10, 2019, 04:12:29 AM
post Duty cycle when driving a CRT TV flyback transformer
[Transformer (ferrite core)]
John123
December 09, 2019, 10:52:59 PM
post Replacement guide for Windows Media Center
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
MRMILSTAR
December 09, 2019, 08:29:16 PM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
Uspring
December 09, 2019, 04:23:33 PM
post Re: Possible use for large inductor (laminated core)
[Transformer (iron core)]
MRMILSTAR
December 09, 2019, 03:59:02 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
December 09, 2019, 03:41:42 PM
post Possible use for large inductor (laminated core)
[Transformer (iron core)]
kamelryttarn
December 09, 2019, 09:43:11 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
December 09, 2019, 12:53:57 AM
post Re: CW multiplier resistor string suggestions
[Voltage Multipliers]
davekni
December 08, 2019, 09:57:51 PM
post Re: CW multiplier resistor string suggestions
[Voltage Multipliers]
MRMILSTAR
December 08, 2019, 05:28:09 PM
post Aethra CCD Webcam Teardown - From Back When Streaming Was Expensive!
[Electronic circuits]
Mads Barnkob
December 08, 2019, 01:33:30 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30