Author Topic: Tungsten  (Read 673 times)

Offline thedoc298

  • High Voltage Experimenter
  • **
  • Posts: 87
  • Karma: +1/-0
    • View Profile
Tungsten
« on: June 16, 2019, 03:51:12 AM »
Building my synchronous spark gap, but on the safety gap it it better to have more surface area like 1/4 inch or 1/8 and round tip verses flat ends. I guess this also pertains to the tungsten on the spark gap rotor also. Thanks for any tips.

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 207
  • Karma: +4/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Tungsten
« Reply #1 on: June 16, 2019, 05:40:52 AM »
For the safety gap, it doesn't make much difference. The effect of different tip shapes will be to vary the firing distance between electrodes for a given safety voltage. The more pointed the electrodes, the distance between the electrodes must be increased to fire at the same voltage as less pointy tips.

As far as the RSG electrodes are concerned, I don't know that it makes much difference. I just use flat tips on my tungsten electrodes and it seems to work just fine. They will naturally round off as they wear. Some would argue that you should use rounded tips to avoid sharp edges which results in corona. The corona then theoretically could make the firing points occur slightly sooner than when the electrodes are at their minimum distance and also make the plasma slightly harder to quench. I just don't like the idea of grinding off any of the material from the tungsten tips. They are already wear items. Why grind off material that accelerates the wear?
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline thedoc298

  • High Voltage Experimenter
  • **
  • Posts: 87
  • Karma: +1/-0
    • View Profile
Re: Tungsten
« Reply #2 on: June 17, 2019, 12:02:39 AM »
Makes good sense. Thanks again, getting close to d day.

High Voltage Forum

Re: Tungsten
« Reply #2 on: June 17, 2019, 12:02:39 AM »

 


* Recent Topics and Posts

post Re: LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
LesWright
August 06, 2020, 10:20:12 PM
post Re: LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
Weston
August 06, 2020, 08:45:59 PM
post Re: Cathodes in Compact Fluorescent Lamps
[Light, Lasers and Optics]
klugesmith
August 06, 2020, 05:41:04 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 06, 2020, 03:53:58 PM
post LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
LesWright
August 06, 2020, 03:28:14 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 06, 2020, 12:59:03 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
August 06, 2020, 10:51:43 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 06, 2020, 08:40:57 AM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 06, 2020, 03:22:38 AM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
davekni
August 05, 2020, 11:48:55 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 05, 2020, 11:37:13 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 05, 2020, 08:01:11 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 05, 2020, 06:34:08 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
Uspring
August 05, 2020, 12:56:32 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
August 05, 2020, 12:55:52 PM
post Re: Bipolar high voltage multiplier project - more than 70cm hot arc discharge
[Voltage Multipliers]
Teravolt
August 04, 2020, 09:21:09 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
johnf
August 04, 2020, 09:16:55 PM
post Re: Does anyone know how this site works.
[General Chat]
thedoc298
August 04, 2020, 05:53:03 PM
post Re: Does anyone know how this site works.
[General Chat]
thedoc298
August 04, 2020, 05:51:03 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 04, 2020, 05:17:26 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Max
August 04, 2020, 02:14:56 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
August 04, 2020, 02:08:07 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
August 04, 2020, 10:48:35 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 04, 2020, 10:02:39 AM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 04, 2020, 08:47:07 AM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 04, 2020, 08:43:00 AM
post Re: Does anyone know how this site works.
[General Chat]
Mads Barnkob
August 04, 2020, 08:33:47 AM
post Re: Does anyone know how this site works.
[General Chat]
MRMILSTAR
August 04, 2020, 05:09:26 AM
post Does anyone know how this site works.
[General Chat]
thedoc298
August 04, 2020, 01:54:49 AM
post Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 03, 2020, 11:55:41 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Teravolt
August 03, 2020, 09:17:40 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 03, 2020, 08:30:38 PM
post Re: Budget USB cameras
[High Speed Filming]
missoum0514
August 03, 2020, 06:56:08 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 03, 2020, 05:23:15 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 03, 2020, 05:02:26 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
August 03, 2020, 04:31:04 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
August 03, 2020, 10:05:59 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
August 03, 2020, 08:21:26 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 11:45:38 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 08:10:47 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
Uspring
August 02, 2020, 07:27:33 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
Uspring
August 02, 2020, 07:14:17 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 06:58:34 PM
post Re: current limiting to parallel resonance circuit
[Beginners]
davekni
August 02, 2020, 06:49:59 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 05:10:12 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 02, 2020, 04:55:14 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:20:13 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:05:12 PM
post Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 01:07:54 PM
post current limiting to parallel resonance circuit
[Beginners]
plasma
August 02, 2020, 07:13:54 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal