Author Topic: Benchtop power supply PCB  (Read 304 times)

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 234
  • Karma: +11/-0
    • View Profile
Benchtop power supply PCB
« on: June 09, 2019, 04:28:29 PM »
I design a power supply PCB based on mixing the attributes of several designs floating around on the internet. You can find it at:

https://github.com/profdc9/LinearPS

The range is up to about 30 volts and the current with a single TIP3055 maximum is about 4 A, though if you run it at low voltage output and high voltage input, you probably want to use multiple TIP3055 to dissipate all that power.

It works. It is intended to take the output of a step-down AC transformer, and it provides constant voltage and constant current controls. It also provides sampled outputs of the actual voltage and current output to connect panel meters, and a low current (zener) +5V to supply digital LCD meters. It can be adjusted for different input AC voltages and different ranges of output voltages and currents using trimmers. Also, it can have up to four TO-220 output devices that can be mounted to a common heatsink (for example, TIP41C or TIP3055 devices) to achieve higher output current.

I made this so that old junk and surplus transformers can be turned into useful benchtop power supplies.

DC can also be input into the board, but the minimum limiting output current will be around 500 mA.

Dan


High Voltage Forum

Benchtop power supply PCB
« on: June 09, 2019, 04:28:29 PM »

 


* Recent Topics and Posts

post Re: Unusually long-lived electrolytic capacitor
[Electronic Circuits]
ritaismyconscience
Today at 06:08:05 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 05:55:55 AM
post Re: Unusually long-lived electrolytic capacitor
[Electronic Circuits]
T3sl4co1l
Today at 05:51:48 AM
post Unusually long-lived electrolytic capacitor
[Electronic Circuits]
MRMILSTAR
Today at 05:43:34 AM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 25, 2020, 01:26:37 PM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
dj.cosmo.esq
February 25, 2020, 01:05:01 PM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 25, 2020, 12:35:06 PM
post Re: FPS4000
[High Speed Filming]
Mads Barnkob
February 25, 2020, 11:29:58 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
February 25, 2020, 08:28:28 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 25, 2020, 06:27:40 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 25, 2020, 06:20:04 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 25, 2020, 04:23:50 AM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
February 24, 2020, 02:53:13 PM
post Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 24, 2020, 02:38:29 PM
post Re: NST
[Spark Gap Tesla Coils (SGTC)]
Jun
February 24, 2020, 02:30:28 PM
post FPS4000
[High Speed Filming]
Hoser415
February 24, 2020, 02:21:50 PM
post Re: HP T620 thin to plus conversion....
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
February 24, 2020, 09:09:33 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 24, 2020, 07:08:30 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 24, 2020, 04:37:33 AM
post Re: DIY 250W LED Flood Light for High Speed Filming
[Light, Lasers and Optics]
Mads Barnkob
February 23, 2020, 09:04:34 PM
post HP T620 thin to plus conversion....
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
spacecabbie
February 23, 2020, 02:03:15 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 23, 2020, 05:43:17 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 23, 2020, 04:07:51 AM
post Finding accelerometer location inside a phone
[Smart Phones]
haversin
February 22, 2020, 07:23:28 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dj.cosmo.esq
February 22, 2020, 07:41:18 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 22, 2020, 06:49:22 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 22, 2020, 03:39:10 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 22, 2020, 02:32:55 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 22, 2020, 02:10:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 22, 2020, 01:27:41 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
February 21, 2020, 08:00:10 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
February 21, 2020, 02:44:44 PM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 21, 2020, 07:21:13 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 21, 2020, 06:11:32 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 21, 2020, 04:42:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
davekni
February 21, 2020, 04:37:53 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 21, 2020, 04:28:33 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 21, 2020, 04:21:31 AM
post GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 21, 2020, 02:41:03 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 21, 2020, 12:28:20 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 20, 2020, 09:45:21 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 20, 2020, 07:28:01 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Uspring
February 20, 2020, 02:06:26 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
shrad
February 20, 2020, 10:38:01 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
davekni
February 20, 2020, 05:14:43 AM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
davekni
February 20, 2020, 05:04:50 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
klugesmith
February 20, 2020, 04:47:41 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 07:29:23 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:47:55 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:45:23 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal