Author Topic: Easy access to optimal resonance frequency but the benefit is quite small  (Read 653 times)

Offline VNTC

  • High Voltage Enthusiast
  • *
  • Posts: 47
  • Karma: +0/-0
    • View Profile
After finished winding the secondary coil we can immediate determine the optimal resonance frequency of a tesla coil.
Used this formula:
Fo=3000000/(L*4)  Fo= optimize resonance frequency
L= length of wire in m
For example :
A coil 1050turns; 9cm diameter
L=1050*9*π=296.8m
L*4=1187.2m
Fo=300000/1187.2=252.7kHz
I have done the test with this coil ruing at a deviation 28% of this frequency and this is the result:
Toroi d   Frequency       Input power   Burst duration   Spark length
20cm   Fr=250kHz   240V/2A        100us               100%
40cm   Fr=180kHz   240V/1.6A         100us                 90%

Fr =RF radiation frequency measure by 5cm antenna with a distance from discharge wire.
Although the difference is not large, but it is a reality exists it reflects exactly the 1/4λ principal in the illustrated picture: with the difference of 180/250 = 72 %( compared to the original reference)
1/4λ=90 degree
¼λ*.72=64.8 degree
Sin 90=1 amplitude =1
Sin 64.8=.9 amplitude =.9
Power is proportional with V*V
Spark length proportional with square root of power output so it is proportional with amplitude V. (last column)

With deviation 28% of frequency will drop 10% of spark length, which is a weak affect so we can say: λ/4 rule is not important role in Tesla coil, hhowever  it is still better to apply it because it is not harmful
« Last Edit: May 21, 2019, 11:38:18 PM by VNTC »

Offline dexter

  • High Voltage Enthusiast
  • *
  • Posts: 28
  • Karma: +2/-0
    • View Profile
I've seen a paper about calculating the self capacitance of a solenoid and in one of the methods they used the self resonance frequency, measured inductance and the length of wire to calculate the self capacitance.
but in their calculation they used l=λ/2 (l= length of wire)

i'm confused... which formula λ/2 or λ/4 describe the self resonance of a solenoid?

Offline VNTC

  • High Voltage Enthusiast
  • *
  • Posts: 47
  • Karma: +0/-0
    • View Profile
Hi Dexter,
Thank you for your reply please read the qote following you will see something.
  Quote:
   Tesla was not the first to invent this circuit.[21][15] Henry Rowland built a spark-excited resonant transformer circuit (above) in 1889[2] and Elihu Thomson had experimented with similar circuits in 1890, including one which could produce 64 inch (1.6 m) sparks,[9][22][23] [1] and other sources confirm     Tesla was not the first.[14][24][15] However he was the first to see practical applications for it and patent it. He even realized that the secondary coil functioned as a quarter-wave resonator; he specified the length of the wire in the secondary coil must be a quarter wavelength at the resonant frequency.[25][8]
A coil with the balance shape will working ok on a wide range of frequency my testing coil can run with toroid 40cm to 15cm with the different 10% only at power out.(180kHz-275kHz)

High Voltage Forum


 


* Recent Topics and Posts

post Re: FPS4000
[High Speed Filming]
Mads Barnkob
Today at 11:29:58 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
Today at 08:28:28 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 06:27:40 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 06:20:04 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
Today at 04:23:50 AM
post Re: Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
February 24, 2020, 02:53:13 PM
post Tesla coil Toroid Aluminium tape benefit
[Spark Gap Tesla Coils (SGTC)]
Jun
February 24, 2020, 02:38:29 PM
post Re: NST
[Spark Gap Tesla Coils (SGTC)]
Jun
February 24, 2020, 02:30:28 PM
post FPS4000
[High Speed Filming]
Hoser415
February 24, 2020, 02:21:50 PM
post Re: HP T620 thin to plus conversion....
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
February 24, 2020, 09:09:33 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 24, 2020, 07:08:30 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 24, 2020, 04:37:33 AM
post Re: DIY 250W LED Flood Light for High Speed Filming
[Light, Lasers and Optics]
Mads Barnkob
February 23, 2020, 09:04:34 PM
post HP T620 thin to plus conversion....
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
spacecabbie
February 23, 2020, 02:03:15 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 23, 2020, 05:43:17 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 23, 2020, 04:07:51 AM
post Finding accelerometer location inside a phone
[Smart Phones]
haversin
February 22, 2020, 07:23:28 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dj.cosmo.esq
February 22, 2020, 07:41:18 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 22, 2020, 06:49:22 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 22, 2020, 03:39:10 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 22, 2020, 02:32:55 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 22, 2020, 02:10:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 22, 2020, 01:27:41 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
February 21, 2020, 08:00:10 PM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
February 21, 2020, 02:44:44 PM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
klugesmith
February 21, 2020, 07:21:13 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 21, 2020, 06:11:32 AM
post Re: GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
February 21, 2020, 04:42:34 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
davekni
February 21, 2020, 04:37:53 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 21, 2020, 04:28:33 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 21, 2020, 04:21:31 AM
post GDT keeps on killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
February 21, 2020, 02:41:03 AM
post Re: 230 volts spark gap
[Spark Gap Tesla Coils (SGTC)]
Quentief
February 21, 2020, 12:28:20 AM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
Twospoons
February 20, 2020, 09:45:21 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
klugesmith
February 20, 2020, 07:28:01 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Uspring
February 20, 2020, 02:06:26 PM
post Re: UV-cured cyanoacrylate glues?
[Light, Lasers and Optics]
shrad
February 20, 2020, 10:38:01 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
davekni
February 20, 2020, 05:14:43 AM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
davekni
February 20, 2020, 05:04:50 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
klugesmith
February 20, 2020, 04:47:41 AM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 07:29:23 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:47:55 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Peregrine
February 19, 2020, 06:45:23 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Teravolt
February 19, 2020, 06:41:42 PM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
John123
February 19, 2020, 06:10:34 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
MRMILSTAR
February 19, 2020, 05:52:20 PM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
ElectroXa
February 19, 2020, 05:05:50 PM
post Re: Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
John123
February 19, 2020, 04:11:22 PM
post Re: Help!Capacitor that burns out after a while!
[Voltage Multipliers]
Uspring
February 19, 2020, 02:03:12 PM
post Is this flyback OK for my Plasma ball ?
[Transformer (Ferrite Core)]
warmania
February 19, 2020, 11:24:58 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal