Author Topic: General Oscilloscope Probing Techniques for (DR)SSTC h-bridge  (Read 309 times)

Offline L_Mangold

  • High Voltage Enthusiast
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Hello everyone,

I wanted to get a few other peoples' input on probing techniques for troubleshooting (DR)SSTC H-bridge circuitry. Currently, I have been using a used analogue CRT scope from Tektronics for probing pretty much everything from my driver to the actual power side of the coil(s) that I've been working on. The benefit of the analogue scope has included being able to see very short/transient spikes, as well as the fact that it has an add feature that allows for differential (I believe) measurements. I've been able to tune my primary, probe current waveforms, and even turn phase lead on the driver, but I've been nervous about taking any measurements when powering the bridge via mains. I just bought a Hantek digital storage scope, and an additional 1-100X probe so my old scope will now be my back-up one and provide an additional 2 channels in case I need more than 2 for one test.

My question is simply to inquire as to how everyone else probes their bridge; particularly probing the high side IGBT's and tuning phase lead, and whether or not you use a high voltage differential probe.

Thank you kindly in advance!

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1048
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: General Oscilloscope Probing Techniques for (DR)SSTC h-bridge
« Reply #1 on: May 15, 2019, 10:08:11 AM »
I use my DSO1054z with a range of different Pearson current monitors and a Tektronix P5100 differential probe for up to 1100V isolated measurements. I also have a 2ch Tektronix A6909 isolator for up to 600V.

I try to follow the guide on measurements found here: https://highvoltageforum.net/index.php?topic=2.0

Quote
Guides and tutorials
https://highvoltageforum.net/index.php?topic=111.0 - Tektronix 30-page guide to do CORRECT measurements on SMPS and Inverters
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Teravolt

  • High Voltage Technician
  • ***
  • Posts: 100
  • Karma: +2/-0
    • View Profile
Re: General Oscilloscope Probing Techniques for (DR)SSTC h-bridge
« Reply #2 on: May 20, 2019, 06:33:49 PM »
invest in a isolation transformer so you can connect your scope common to your power sources common. reserch so you understand what you doing. I just use a dual winding 120 to 120 transformer. it does not have to be a expensive topaz transformer just something to seperate your mains refrance to ground. if you have 220 the same applies. it will be cheaper than a diferencial probe

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1048
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: General Oscilloscope Probing Techniques for (DR)SSTC h-bridge
« Reply #3 on: May 21, 2019, 09:51:27 PM »
Dave from EEVblog made a video long ago on oscilloscope grounding

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline L_Mangold

  • High Voltage Enthusiast
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: General Oscilloscope Probing Techniques for (DR)SSTC h-bridge
« Reply #4 on: June 01, 2019, 12:23:13 AM »
I love Dave from EEVblog. Thank you very much for the input friends!

High Voltage Forum

Re: General Oscilloscope Probing Techniques for (DR)SSTC h-bridge
« Reply #4 on: June 01, 2019, 12:23:13 AM »

 


* Recent Topics and Posts

post A quick way can checking f1=1/2π√L1C1 in 30 second
[Dual Resonant Solid State Tesla coils]
VNTC
Today at 04:05:38 AM
post Unknown part of original Tesla coil
[Dual Resonant Solid State Tesla coils]
VNTC
Today at 02:44:17 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
Today at 12:00:18 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
July 21, 2019, 11:18:06 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
July 21, 2019, 03:25:02 PM
post CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
acobaugh
July 21, 2019, 05:32:28 AM
post Re: Welcome new members, come say hello and tell a little about yourself :
[General chatting]
ElectroXa
July 20, 2019, 09:45:42 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
July 19, 2019, 11:19:45 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
July 19, 2019, 03:36:44 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
DICKEYBIRD
July 19, 2019, 03:24:38 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
July 19, 2019, 02:23:29 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
DICKEYBIRD
July 19, 2019, 01:06:44 AM
post Re: Floppiclene! A Electronics Cleaning Relic of the Past.
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Justin
July 18, 2019, 10:29:32 PM
post Re: Floppiclene! A Electronics Cleaning Relic of the Past.
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
July 18, 2019, 08:52:35 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
July 18, 2019, 05:49:27 AM
post A new quick way to get into tune a DRSSTC
[Dual Resonant Solid State Tesla coils]
VNTC
July 18, 2019, 03:13:27 AM
post Re: Floppiclene! A Electronics Cleaning Relic of the Past.
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Twospoons
July 18, 2019, 12:06:53 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
July 17, 2019, 07:56:41 PM
post Floppiclene! A Electronics Cleaning Relic of the Past.
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
July 17, 2019, 11:25:22 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
July 16, 2019, 07:39:33 AM
post Re: What is the true in tuning guide?
[Dual Resonant Solid State Tesla coils]
VNTC
July 16, 2019, 05:11:21 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
profdc9
July 16, 2019, 04:05:07 AM
post Re: DRSSTC in brust mode
[Dual Resonant Solid State Tesla coils]
SAMGO
July 16, 2019, 02:25:27 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
July 16, 2019, 01:54:30 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
July 15, 2019, 02:51:26 PM
post Re: What is the true in tuning guide?
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
July 15, 2019, 02:48:02 PM
post Re: A problem solved with hand tools
[General chatting]
Mads Barnkob
July 15, 2019, 01:48:08 PM
post Re: Kaizer half bridge driver
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
July 15, 2019, 01:45:00 PM
post Re: A problem solved with hand tools
[General chatting]
Hydron
July 15, 2019, 11:21:29 AM
post What is the true in tuning guide?
[Dual Resonant Solid State Tesla coils]
VNTC
July 15, 2019, 10:01:21 AM
post A problem solved with hand tools
[General chatting]
klugesmith
July 15, 2019, 07:52:41 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
klugesmith
July 15, 2019, 07:33:30 AM
post Re: tesla coil varnish is dumb
[Solid state Tesla coils]
Hydron
July 14, 2019, 10:49:03 PM
post Re: tesla coil varnish is dumb
[Solid state Tesla coils]
T3sl4co1l
July 14, 2019, 09:59:40 PM
post Re: tesla coil varnish is dumb
[Solid state Tesla coils]
Mads Barnkob
July 14, 2019, 08:20:52 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
July 14, 2019, 06:06:30 PM
post tesla coil varnish is dumb
[Solid state Tesla coils]
Fumeaux
July 14, 2019, 05:29:10 PM
post Led Closeups with Mobile phone and lens .
[Smart phones]
DashApple
July 14, 2019, 03:00:09 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
July 14, 2019, 02:06:26 PM
post Re: DRSSTC in brust mode
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
July 14, 2019, 02:04:22 PM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
oneKone
July 14, 2019, 01:27:18 AM
post Re: DRSSTC in brust mode
[Dual Resonant Solid State Tesla coils]
johnf
July 14, 2019, 01:22:15 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
July 13, 2019, 03:48:54 PM
post DRSSTC in brust mode
[Dual Resonant Solid State Tesla coils]
SAMGO
July 13, 2019, 04:17:55 AM
post Re: Kaizer half bridge driver
[Dual Resonant Solid State Tesla coils]
donnersm
July 12, 2019, 08:54:54 PM
post Re: Kaizer half bridge driver
[Dual Resonant Solid State Tesla coils]
profdc9
July 12, 2019, 07:16:40 PM
post Re: Kaizer half bridge driver
[Dual Resonant Solid State Tesla coils]
profdc9
July 12, 2019, 06:33:00 PM
post Smooth corona or heavy spark, RF wave radiation frequency of Tesla coil drops ve
[Dual Resonant Solid State Tesla coils]
VNTC
July 12, 2019, 11:09:28 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
July 12, 2019, 09:56:38 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
July 12, 2019, 01:23:58 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30