Author Topic: Kaizer DRSSTC1 bridge failure and repair, caught on video.  (Read 872 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1143
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Kaizer DRSSTC1 bridge failure and repair, caught on video.
« on: February 22, 2019, 02:59:46 PM »
/>
Schematic and pictures: http://kaizerpowerelectronics.dk/tesla-coils/kaizer-drsstc-i/

My first DRSSTC had a unfortunate and not-so-dramatic failure. I suspect in-adequate grounding from the coils grounding bar to ground to be the culprit, I will know more once I take the old bridge apart.

Silent death during a MIDI playback, once power is turned back on, the bridge short circuits and burns outs. I quickly changed it to a SKM200GB123 inverter bridge that I had around, built for another experimental project, hence why its a little crude.

It took 3-4 evenings/nights to locate all the faults, replace parts and get it running again. I am happy.

Can you guess the song that was played?

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 266
  • Karma: +8/-0
    • View Profile
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #1 on: February 22, 2019, 04:34:54 PM »
Without watching the video I'm guessing popcorn :P

Offline Laci

  • High Voltage Engineer
  • ****
  • Posts: 213
  • Karma: +6/-0
    • View Profile
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #2 on: February 22, 2019, 06:10:35 PM »
In my opinion it's still better to burn it down home,than in front of audience. :) Maybe just some ghosts are playing with you. ::)

Offline dexter

  • High Voltage Enthusiast
  • *
  • Posts: 27
  • Karma: +2/-0
    • View Profile
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #3 on: February 22, 2019, 07:47:34 PM »
How much Amps can you push with the new  SKM200GB123 bridge?

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1143
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #4 on: February 23, 2019, 09:51:19 PM »
It is indeed better to have a failure at home than out on a show.

Without watching the video I'm guessing popcorn :P

It was ghostbusters theme I was playing, I think the first two notes are pretty obvious :p

How much Amps can you push with the new  SKM200GB123 bridge?

I was contemplating to run it at 600A OCD setting, where the 60N60 ran at 500A. The SKM200 will properly do higher just fine, but it is really not needed for this coil.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Phoenix

  • High Voltage Experimenter
  • **
  • Posts: 67
  • Karma: +1/-0
    • View Profile
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #5 on: February 24, 2019, 12:19:39 AM »
I can tell from my own experience, that the SKM200 Bricks are very robust. I once accidentally pushed them to 1300A at 120BPS and 250┬Ás Ontime with imperfect ZCS before they failed after 30 seconds. Right now, i am running 4 SKM200GB128D Bricks in my DRSSTC with 2 Bricks in parallel at 1100A.

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 266
  • Karma: +8/-0
    • View Profile
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #6 on: February 24, 2019, 12:27:13 AM »
I was gonna say that my SKM200GB125Ds were fine at ~750A or so (might have hit 800, was a while ago so forget exactly).

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 281
  • Karma: +6/-0
    • View Profile
Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #7 on: February 25, 2019, 12:31:15 AM »
Dang... Sucks to have blown but at least you finally upgraded the bridge! Keen to see what it can do now!

High Voltage Forum

Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
« Reply #7 on: February 25, 2019, 12:31:15 AM »

 


* Recent Topics and Posts

post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
Today at 10:00:06 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
Today at 09:56:51 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
Weston
Today at 09:45:49 PM
post Re: Phoenix's Large DRSSTC II
[Dual Resonant Solid State Tesla coils]
shrad
Today at 09:03:49 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
Today at 08:28:07 AM
post Re: 50KVA generator on a 4 cylinder Dorman diesel engine
[Electronic circuits]
johnf
Today at 07:50:47 AM
post Re: Phoenix's Large DRSSTC II
[Dual Resonant Solid State Tesla coils]
Phoenix
Today at 07:07:43 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
Today at 01:24:00 AM
post Re: 50KVA generator on a 4 cylinder Dorman diesel engine
[Electronic circuits]
DICKEYBIRD
October 20, 2019, 10:39:59 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
DICKEYBIRD
October 20, 2019, 10:34:22 PM
post Re: QCW Capacitor Torture Testing
[Dual Resonant Solid State Tesla coils]
Hydron
October 20, 2019, 12:27:54 PM
post Re: QCW Capacitor Torture Testing
[Dual Resonant Solid State Tesla coils]
klugesmith
October 19, 2019, 10:15:56 PM
post More things wanting homes
[Sell / Buy / Trade]
klugesmith
October 19, 2019, 09:56:15 PM
post How to get rid of stuff?
[Sell / Buy / Trade]
klugesmith
October 19, 2019, 09:43:02 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 18, 2019, 05:35:02 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
T3sl4co1l
October 18, 2019, 04:29:03 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 18, 2019, 02:09:23 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 18, 2019, 09:00:52 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
T3sl4co1l
October 18, 2019, 08:05:06 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
davekni
October 18, 2019, 06:30:06 AM
post Re: so far video
[Spark gap Tesla coils]
thedoc298
October 18, 2019, 04:42:52 AM
post QCW Capacitor Torture Testing
[Dual Resonant Solid State Tesla coils]
Weston
October 18, 2019, 02:41:44 AM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils]
bozidar
October 17, 2019, 05:53:09 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 17, 2019, 05:09:29 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 17, 2019, 04:04:53 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
T3sl4co1l
October 17, 2019, 11:30:19 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 17, 2019, 10:59:31 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
Bert911
October 17, 2019, 10:02:12 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 17, 2019, 08:19:19 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
Bert911
October 17, 2019, 07:57:58 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
T3sl4co1l
October 17, 2019, 06:19:14 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
T3sl4co1l
October 17, 2019, 05:45:36 AM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils]
davekni
October 17, 2019, 03:22:22 AM
post Re: making a useable induction forge.
[Transformer (iron core)]
davekni
October 17, 2019, 03:08:49 AM
post Re: Mysterious Chinese HV capacitors
[Capacitor banks]
Experimentonomen
October 16, 2019, 08:41:05 PM
post Re: Mysterious Chinese HV capacitors
[Capacitor banks]
ElectroXa
October 16, 2019, 08:35:30 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
rustedone
October 16, 2019, 05:49:02 PM
post Re: Analog Panel Meter Shunt Calculation and Custom Scale Design
[Beginners]
klugesmith
October 16, 2019, 05:36:46 PM
post Re: making a useable induction forge.
[Transformer (iron core)]
T3sl4co1l
October 16, 2019, 05:07:22 PM
post making a useable induction forge.
[Transformer (iron core)]
rustedone
October 16, 2019, 04:20:15 PM
post Re: 220ac to 440dc 5a boost convertor
[Voltage Multipliers]
rustedone
October 16, 2019, 04:03:58 PM
post Analog Panel Meter Shunt Calculation and Custom Scale Design
[Beginners]
Mads Barnkob
October 16, 2019, 07:56:20 AM
post Re: Mysterious Chinese HV capacitors
[Capacitor banks]
MRMILSTAR
October 16, 2019, 05:40:55 AM
post Re: Mysterious Chinese HV capacitors
[Capacitor banks]
davekni
October 16, 2019, 03:33:52 AM
post WTS [US]: pole transformer, SRSG, PTs, NSTs, capacitors, variacs, [MORE]
[Sell / Buy / Trade]
acobaugh
October 15, 2019, 09:36:55 PM
post Mysterious Chinese HV capacitors
[Capacitor banks]
MRMILSTAR
October 15, 2019, 09:12:09 PM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
October 15, 2019, 12:38:24 PM
post Re: How to measure voltage output of AC flyback transformer
[Transformer (ferrite core)]
davekni
October 14, 2019, 10:02:07 PM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils]
Weston
October 14, 2019, 08:46:54 PM
post Re: How to measure voltage output of AC flyback transformer
[Transformer (ferrite core)]
MRMILSTAR
October 14, 2019, 08:28:19 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30