Author Topic: 1000 Watt ZVS induction heater experiments  (Read 1532 times)

Offline petespaco

  • High Voltage Technician
  • ***
  • Posts: 159
  • Karma: +9/-0
    • View Profile
    • French Creek Valley Activities
1000 Watt ZVS induction heater experiments
« on: April 16, 2017, 06:04:26 PM »
Several months ago I got one of the cheap 5-12 volt ZVS induction heaters from  China.  I tried it out and it worked okay, so I bought one of the 1000 watt versions.  Then I started a lengthy process of experimenting with that kind of unit to see how much power transfer to a load it could produce reliably.
Mads asked me to join this forum because I had been asking questions on his Royer Oscillator page and interacting with others on it.

So now I have a rather detailed a webpage that covers my experiments to date pretty well and several youtube videos on this specific subject.

4/17/2017: I am modifying this post because I didn't give readers the direct link to my ZVS 1000 watt induction heater page.
Mads discovered this omission and did insert it in a following reply, but I thought I'd add it here, in case a reader didn't notice it there:
https://spaco.org/Blacksmithing/ZVSInductionHeater/1000WattZVSInductionHeaterNotes.htm


Youtube Playlist :
https://www.youtube.com/playlist?list=PLVxWen9M87dBhvInCQ-3pELWdxCM3XH4I

Pete Stanaitis
--------------
« Last Edit: April 17, 2017, 07:50:18 PM by petespaco »

Offline kamelryttarn

  • High Voltage Technician
  • ***
  • Posts: 125
  • Karma: +0/-0
    • View Profile
Re: 1000 Watt ZVS induction heater experiments
« Reply #1 on: April 16, 2017, 08:08:42 PM »
Wow, those videos were very informative and helpful. I have wondered a lot about different sized heater coils and also if there is any difference in inductance when you stretch it out and now I know. Thank you very much for sharing all of your work!

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1454
  • Karma: +24/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: 1000 Watt ZVS induction heater experiments
« Reply #2 on: April 16, 2017, 09:57:50 PM »
Hi Pete and welcome to the forum :)

Last night I was chatting with a guy that had problems with a Royer IH and I remembered your extensive guide and trouble shooting site, but could for the love of god not recall the website adress, so thanks for writing!

Pete's experiment notes: https://spaco.org/Blacksmithing/ZVSInductionHeater/1000WattZVSInductionHeaterNotes.htm

and trouble shooting guide: https://spaco.org/Blacksmithing/ZVSInductionHeater/1000Watt12to48VoltZVSInductionHeaterTroubleshootingGuide.htm
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

High Voltage Forum

Re: 1000 Watt ZVS induction heater experiments
« Reply #2 on: April 16, 2017, 09:57:50 PM »

 


* Recent Topics and Posts

post Re: Budget USB cameras
[High Speed Filming]
missoum0514
Today at 06:56:08 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
Today at 05:23:15 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
Today at 05:02:26 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
Today at 04:31:04 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
Today at 10:05:59 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
Today at 08:21:26 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 11:45:38 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 08:10:47 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
Uspring
August 02, 2020, 07:27:33 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
Uspring
August 02, 2020, 07:14:17 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 06:58:34 PM
post Re: current limiting to parallel resonance circuit
[Beginners]
davekni
August 02, 2020, 06:49:59 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 05:10:12 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 02, 2020, 04:55:14 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:20:13 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:05:12 PM
post Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 01:07:54 PM
post current limiting to parallel resonance circuit
[Beginners]
plasma
August 02, 2020, 07:13:54 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 02:26:11 AM
post Re: FPS1000HD unboxing and first impression
[High Speed Filming]
missoum0514
August 01, 2020, 11:57:24 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
TMaxElectronics
August 01, 2020, 10:24:21 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
klugesmith
August 01, 2020, 03:59:43 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 01, 2020, 06:22:53 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 07:32:09 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 06:15:27 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 05:38:49 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
klugesmith
July 31, 2020, 04:35:43 PM
post Re: MIDI videos from my DRSSTC1/2/3 demonstrations/shows
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 31, 2020, 02:33:48 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
July 31, 2020, 01:47:51 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
July 31, 2020, 10:51:47 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
July 31, 2020, 06:37:20 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
July 31, 2020, 04:11:14 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 02:33:30 AM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Halfcorp
July 31, 2020, 01:29:05 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 12:38:28 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
July 31, 2020, 12:13:43 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
johnf
July 30, 2020, 09:51:25 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 30, 2020, 09:50:16 PM
post How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
July 30, 2020, 02:05:39 PM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
July 30, 2020, 03:14:53 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 29, 2020, 10:00:44 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
July 29, 2020, 06:09:14 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
July 29, 2020, 12:52:24 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 29, 2020, 08:32:00 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 29, 2020, 05:23:35 AM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 29, 2020, 04:34:02 AM
post IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Halfcorp
July 29, 2020, 01:56:26 AM
post Re: my 4" coil turned to a 6" at 68"+ arcs
[Spark Gap Tesla Coils (SGTC)]
Bradselph
July 28, 2020, 10:33:09 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Halfcorp
July 28, 2020, 01:14:38 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
July 28, 2020, 01:11:56 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal