Author Topic: 1000 Watt ZVS induction heater experiments  (Read 1198 times)

Offline petespaco

  • High Voltage Technician
  • ***
  • Posts: 130
  • Karma: +8/-0
    • View Profile
    • French Creek Valley Activities
1000 Watt ZVS induction heater experiments
« on: April 16, 2017, 06:04:26 PM »
Several months ago I got one of the cheap 5-12 volt ZVS induction heaters from  China.  I tried it out and it worked okay, so I bought one of the 1000 watt versions.  Then I started a lengthy process of experimenting with that kind of unit to see how much power transfer to a load it could produce reliably.
Mads asked me to join this forum because I had been asking questions on his Royer Oscillator page and interacting with others on it.

So now I have a rather detailed a webpage that covers my experiments to date pretty well and several youtube videos on this specific subject.

4/17/2017: I am modifying this post because I didn't give readers the direct link to my ZVS 1000 watt induction heater page.
Mads discovered this omission and did insert it in a following reply, but I thought I'd add it here, in case a reader didn't notice it there:
https://spaco.org/Blacksmithing/ZVSInductionHeater/1000WattZVSInductionHeaterNotes.htm


Youtube Playlist :
https://www.youtube.com/playlist?list=PLVxWen9M87dBhvInCQ-3pELWdxCM3XH4I

Pete Stanaitis
--------------
« Last Edit: April 17, 2017, 07:50:18 PM by petespaco »

Offline kamelryttarn

  • High Voltage Technician
  • ***
  • Posts: 113
  • Karma: +0/-0
    • View Profile
Re: 1000 Watt ZVS induction heater experiments
« Reply #1 on: April 16, 2017, 08:08:42 PM »
Wow, those videos were very informative and helpful. I have wondered a lot about different sized heater coils and also if there is any difference in inductance when you stretch it out and now I know. Thank you very much for sharing all of your work!

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1174
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: 1000 Watt ZVS induction heater experiments
« Reply #2 on: April 16, 2017, 09:57:50 PM »
Hi Pete and welcome to the forum :)

Last night I was chatting with a guy that had problems with a Royer IH and I remembered your extensive guide and trouble shooting site, but could for the love of god not recall the website adress, so thanks for writing!

Pete's experiment notes: https://spaco.org/Blacksmithing/ZVSInductionHeater/1000WattZVSInductionHeaterNotes.htm

and trouble shooting guide: https://spaco.org/Blacksmithing/ZVSInductionHeater/1000Watt12to48VoltZVSInductionHeaterTroubleshootingGuide.htm
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: 1000 Watt ZVS induction heater experiments
« Reply #2 on: April 16, 2017, 09:57:50 PM »

 


* Recent Topics and Posts

post Re: CW multiplier resistor string suggestions
[Voltage Multipliers]
davekni
Today at 06:50:11 AM
post Re: CW multiplier resistor string suggestions
[Voltage Multipliers]
plasma
Today at 12:00:00 AM
post CW multiplier resistor string suggestions
[Voltage Multipliers]
MRMILSTAR
December 07, 2019, 11:32:49 PM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
klugesmith
December 07, 2019, 09:54:31 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
December 07, 2019, 09:48:21 PM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
klugesmith
December 07, 2019, 08:59:57 PM
post Re: Cost reduction in consumer electrics
[Electronic circuits]
MRMILSTAR
December 06, 2019, 08:35:29 PM
post Re: Full bridge showing half the voltage
[Beginners]
plasma
December 06, 2019, 05:19:26 AM
post Re: Cost reduction in consumer electrics
[Electronic circuits]
davekni
December 06, 2019, 03:48:34 AM
post Re: Cost reduction in consumer electrics
[Electronic circuits]
the_anomaly
December 06, 2019, 03:35:39 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
AstRii
December 06, 2019, 01:27:03 AM
post Re: Full bridge showing half the voltage
[Beginners]
plasma
December 05, 2019, 11:38:59 PM
post Re: Cost reduction in consumer electrics
[Electronic circuits]
Mads Barnkob
December 05, 2019, 07:33:01 PM
post Re: Cost reduction in consumer electrics
[Electronic circuits]
sjsimmo
December 05, 2019, 11:09:20 AM
post Cost reduction in consumer electrics
[Electronic circuits]
klugesmith
December 05, 2019, 07:25:20 AM
post Re: HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 05, 2019, 05:52:11 AM
post Re: HV resistor in oil
[Voltage Multipliers]
davekni
December 05, 2019, 05:21:07 AM
post Re: HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 04, 2019, 06:05:11 PM
post Re: Full bridge showing half the voltage
[Beginners]
shrad
December 04, 2019, 02:57:02 PM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
Uspring
December 04, 2019, 12:40:51 PM
post Re: Full bridge showing half the voltage
[Beginners]
plasma
December 04, 2019, 11:20:25 AM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
klugesmith
December 04, 2019, 08:28:15 AM
post Re: Full bridge showing half the voltage
[Beginners]
klugesmith
December 04, 2019, 07:41:21 AM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
MRMILSTAR
December 04, 2019, 05:15:49 AM
post Re: HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 04, 2019, 05:06:39 AM
post Re: HV resistor in oil
[Voltage Multipliers]
davekni
December 04, 2019, 04:31:16 AM
post Re: Full bridge showing half the voltage
[Beginners]
davekni
December 04, 2019, 04:26:38 AM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
klugesmith
December 04, 2019, 04:10:16 AM
post Re: Sense coil fabrication?
[Induction launchers, coil guns and rails guns]
klugesmith
December 04, 2019, 12:28:15 AM
post Re: Full bridge showing half the voltage
[Beginners]
plasma
December 04, 2019, 12:11:32 AM
post Re: HV resistor in oil
[Voltage Multipliers]
johnf
December 03, 2019, 07:58:41 PM
post Re: Driving Nixie-tubes with arduino
[Electronic circuits]
johnf
December 03, 2019, 07:54:08 PM
post Re: Full bridge showing half the voltage
[Beginners]
klugesmith
December 03, 2019, 07:41:00 PM
post Re: Driving Nixie-tubes with arduino
[Electronic circuits]
kamelryttarn
December 03, 2019, 02:14:00 PM
post Re: Driving Nixie-tubes with arduino
[Electronic circuits]
Mads Barnkob
December 03, 2019, 01:24:00 PM
post Re: Driving Nixie-tubes with arduino
[Electronic circuits]
klugesmith
December 03, 2019, 10:45:58 AM
post Driving Nixie-tubes with arduino
[Electronic circuits]
kamelryttarn
December 03, 2019, 09:04:42 AM
post Re: Full bridge showing half the voltage
[Beginners]
plasma
December 03, 2019, 07:29:48 AM
post Re: HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 03, 2019, 05:07:28 AM
post Re: HV resistor in oil
[Voltage Multipliers]
davekni
December 03, 2019, 04:34:46 AM
post Re: HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 02, 2019, 09:06:07 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
T3sl4co1l
December 02, 2019, 10:51:33 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
December 02, 2019, 05:49:05 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
December 02, 2019, 04:10:14 AM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
davekni
December 02, 2019, 04:09:37 AM
post Re: HV resistor in oil
[Voltage Multipliers]
davekni
December 02, 2019, 03:42:16 AM
post Re: HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 01, 2019, 10:47:18 PM
post Re: HV resistor in oil
[Voltage Multipliers]
Mads Barnkob
December 01, 2019, 09:17:38 PM
post HV resistor in oil
[Voltage Multipliers]
MRMILSTAR
December 01, 2019, 08:51:31 PM
post Re: SGTC MK1 - An Accomplishment in Progress
[Spark gap Tesla coils]
jturnerkc
December 01, 2019, 07:32:44 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30