Author Topic: Isolated Series Li-ion Charger  (Read 797 times)

Offline FilipŠebík

  • High Voltage Enthusiast
  • *
  • Posts: 34
  • Karma: +1/-0
    • View Profile
Isolated Series Li-ion Charger
« on: December 21, 2018, 07:46:35 PM »
Hello people, I will build my own Boom Box but I don't want to use bulky Pb or GEL accumulators so I will use Li-ion batteries and they will be 4S1P pack or 4S2P. So I wanted to get a charger module off of ebay, but I didn't find any that can be LEGIT 100% working balance chargers so I decided to make my own scheme.

EDIT: (Accidentally pressed enter) It works with 4S batteries connected through NC contacts of DPDT and when its plugged into a charger, the charger will supply the load, the relays will open and the batteries will individually charge using TP4056 modules from ebay (that's why there are no LEDs in the scheme) and when the charger gets disconnected, then the relay will open and the batteries will supply the load
EDIT2: Wrong attachment
EDIT3: Schematic errors... What a nice day it was :(
« Last Edit: December 21, 2018, 08:05:59 PM by FilipŠebík »

Offline the_anomaly

  • High Voltage Enthusiast
  • *
  • Posts: 25
  • Karma: +1/-0
    • View Profile
Re: Isolated Series Li-ion Charger
« Reply #1 on: December 22, 2018, 01:06:53 PM »
I don't see a current sense resistor on the battery pack so I don't think you will be able to charge them accurately.  You need to be able to count the coulombs of charge going into and coming out of the battery to know to keep charging/discharging or not.  I have some doubts about this chip TP4056X.  Texas Instruments makes a lot of battery management chips like the bq40z50-r2 which would work well for you http://www.ti.com/product/BQ40Z50-R2

Offline FilipŠebík

  • High Voltage Enthusiast
  • *
  • Posts: 34
  • Karma: +1/-0
    • View Profile
Re: Isolated Series Li-ion Charger
« Reply #2 on: December 22, 2018, 03:51:25 PM »
I didn't bother with putting led's before the resistors on pins 6 and 7. They respectively show the charging and charged status of the battery and the IC TP4056 is working as I've used it before and it doesn't need current sense resistor on the batteries.

Also I don't want to use any other IC, because they are in SMD packages only and I don't have the right equipment to solder SMD components. And the TP4056 is very common 18650 Li-ion charging circuit on ebay and youtube and it comes as a module from ebay even with protection https://www.ebay.ie/itm/Micro-USB-TP4056-li-ion-li-po-lipo-Battery-Charger-Module-Discharge-Protection/272986428636?hash=item3f8f4254dc:m:mZvOYFXrR8CXcgPDwxGjHyg:rk:3:pf:0

Also if the battery gets discharged (one of them), the 4S protection board I will use contains Under Voltage Protection, so it turns off the control mosfet and this interrupts the current flow into RL.

Offline station240

  • High Voltage Enthusiast
  • *
  • Posts: 8
  • Karma: +1/-0
    • View Profile
Re: Isolated Series Li-ion Charger
« Reply #3 on: December 23, 2018, 12:59:50 PM »
You can get tp5000 modules off ebay too, higher efficiency and charge at 2A by default.

Offline sjsimmo

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +3/-0
  • Australia
    • View Profile
Re: Isolated Series Li-ion Charger
« Reply #4 on: December 24, 2018, 01:26:17 AM »
I've also used the TP4056 and they work fine, although they're limited to 1A charging current. The have internal current sense resistors, so they don't need one externally (just a current set resistor is required).  :)


Ideally the 'temp' pin should be wired to the battery with a NTC in series, but this is only really needed if it's going to be on charge, with an old/faulty battery, and you're not around to keep an eye on it.
I like my food cooked with lightning.

High Voltage Forum

Re: Isolated Series Li-ion Charger
« Reply #4 on: December 24, 2018, 01:26:17 AM »

 


* Recent Topics and Posts

post APC RS-1000 UPS Teardown
[Electronic Circuits]
Mads Barnkob
Today at 10:21:23 AM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid State Tesla Coils (SSTC)]
davekni
Today at 06:16:56 AM
post Re: Strange oscillations
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 05:59:12 AM
post Sgtc nst 12kv 30ma
[Spark Gap Tesla Coils (SGTC)]
Mkyspn
Today at 01:45:36 AM
post Re: WTS:Power diodes "hockey Puck" MDF 652 02
[Sell / Buy / Trade]
rikkitikkitavi
January 28, 2020, 10:44:43 PM
post Re: SSTC low voltage at gate transformer and heating drivers
[Solid State Tesla Coils (SSTC)]
babass
January 28, 2020, 10:02:54 PM
post Re: WTS:Power diodes "hockey Puck" MDF 652 02
[Sell / Buy / Trade]
klugesmith
January 28, 2020, 10:01:54 PM
post Re: Strange oscillations
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
January 28, 2020, 08:36:51 PM
post Re: WTS:Power diodes "hockey Puck" MDF 652 02
[Sell / Buy / Trade]
Da_Stier
January 28, 2020, 07:58:41 PM
post Re: GM tube hv transformer
[Detection, Counting and Measurements]
shrad
January 28, 2020, 12:32:39 PM
post Re: WTS:Power diodes "hockey Puck" MDF 652 02
[Sell / Buy / Trade]
rikkitikkitavi
January 27, 2020, 09:01:23 PM
post Re: WTS:Power diodes "hockey Puck" MDF 652 02
[Sell / Buy / Trade]
Da_Stier
January 27, 2020, 05:56:32 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
T3sl4co1l
January 27, 2020, 12:54:42 AM
post WTS:Power diodes "hockey Puck" MDF 652 02
[Sell / Buy / Trade]
rikkitikkitavi
January 26, 2020, 10:13:38 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
davekni
January 26, 2020, 04:55:49 AM
post Re: GM tube hv transformer
[Detection, Counting and Measurements]
futurist
January 25, 2020, 11:01:24 AM
post Re: CT performance investigations (Pearson and DIY)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
T3sl4co1l
January 25, 2020, 06:44:21 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
T3sl4co1l
January 25, 2020, 06:37:47 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
January 25, 2020, 02:22:09 AM
post Re: GM tube hv transformer
[Detection, Counting and Measurements]
haversin
January 25, 2020, 01:15:21 AM
post Re: GM tube hv transformer
[Detection, Counting and Measurements]
klugesmith
January 24, 2020, 10:53:42 PM
post Re: WTB [EU]: Cellular Sector Antenna
[Sell / Buy / Trade]
Da_Stier
January 24, 2020, 10:52:48 PM
post Re: GM tube hv transformer
[Detection, Counting and Measurements]
haversin
January 24, 2020, 10:29:14 PM
post Re: Problems with my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
bozidar
January 24, 2020, 08:16:12 PM
post GM tube hv transformer
[Detection, Counting and Measurements]
AlexanderHun
January 24, 2020, 06:24:25 PM
post Re: DIY SMAW welder (stick welding)
[Electronic Circuits]
rikkitikkitavi
January 24, 2020, 05:17:01 PM
post Re: My 833A VTTC
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 24, 2020, 04:37:25 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
justin66
January 24, 2020, 04:15:41 PM
post Re: My 833A VTTC
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
January 24, 2020, 01:15:46 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 24, 2020, 01:10:38 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
January 24, 2020, 12:39:01 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
justin66
January 24, 2020, 11:43:08 AM
post Re: My 833A VTTC
[Vacuum Tube Tesla Coils (VTTC)]
kilovolt
January 24, 2020, 11:10:55 AM
post Re: DIY SMAW welder (stick welding)
[Electronic Circuits]
kamelryttarn
January 24, 2020, 10:11:51 AM
post Re: Doorknob vs Ceramic Disk
[Voltage Multipliers]
kilovolt
January 24, 2020, 09:03:52 AM
post Re: CT performance investigations (Pearson and DIY)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
January 23, 2020, 11:50:22 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 23, 2020, 11:42:56 PM
post Re: WTB [EU]: Cellular Sector Antenna
[Sell / Buy / Trade]
Mads Barnkob
January 23, 2020, 11:35:07 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
justin66
January 23, 2020, 11:15:12 PM
post Re: Doorknob vs Ceramic Disk
[Voltage Multipliers]
MRMILSTAR
January 23, 2020, 10:42:22 PM
post Re: CT performance investigations (Pearson and DIY)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
T3sl4co1l
January 23, 2020, 10:03:17 PM
post Re: Doorknob vs Ceramic Disk
[Voltage Multipliers]
kilovolt
January 23, 2020, 09:55:05 PM
post Re: Doorknob vs Ceramic Disk
[Voltage Multipliers]
MRMILSTAR
January 23, 2020, 08:39:10 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
January 23, 2020, 08:37:43 PM
post Re: simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
January 23, 2020, 08:16:02 PM
post simple confusion about UD2.7c LEDs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
justin66
January 23, 2020, 07:48:39 PM
post Re: Bipolar high voltage multiplier project - more than 70cm hot arc discharge
[Voltage Multipliers]
kilovolt
January 23, 2020, 05:07:46 PM
post Re: My 240kv voltage multiplier
[Voltage Multipliers]
kilovolt
January 23, 2020, 05:05:40 PM
post Re: Doorknob vs Ceramic Disk
[Voltage Multipliers]
kilovolt
January 23, 2020, 05:01:27 PM
post WTB [EU]: Cellular Sector Antenna
[Sell / Buy / Trade]
Da_Stier
January 23, 2020, 04:34:34 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal