Author Topic: Usable vacuum tube?  (Read 383 times)

Offline kamelryttarn

  • High Voltage Experimenter
  • **
  • Posts: 87
  • Karma: +0/-0
    • View Profile
Usable vacuum tube?
« on: November 06, 2018, 12:56:44 PM »
I think I have a 5867 tube with the necessary transformers (heater and HV) and was wondering if it's possible to use it for a VTTC. I found a schematic that use a pair of 811 tubes but I am unsure if it's possible to use a single triode. Any thoughts?

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 851
  • Karma: +7/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Usable vacuum tube?
« Reply #1 on: November 06, 2018, 02:10:34 PM »
It even easier to use just one tube for a VTTC, since you do not have to do any impedance matching between the tubes or adjust grid-leak circuit feedback between them.

A 5867 ~ TB3/750 should make a nice VTTC.

Are you going to use the classic Armstrong VTTC circuit?
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline kamelryttarn

  • High Voltage Experimenter
  • **
  • Posts: 87
  • Karma: +0/-0
    • View Profile
Re: Usable vacuum tube?
« Reply #2 on: November 06, 2018, 04:04:55 PM »
It even easier to use just one tube for a VTTC, since you do not have to do any impedance matching between the tubes or adjust grid-leak circuit feedback between them.

A 5867 ~ TB3/750 should make a nice VTTC.

Are you going to use the classic Armstrong VTTC circuit?

Haven't got that far in the planning yet. I need to get a better understanding of the circuit first. And also try and measure my transformers. The HV should be interesting. Is a crude voltage divider ok to use for lowering the voltage to my multimeter?

[edit]
I connected the HV-transformers primary to the secondary of a transformer I had laying around. I also found an old multimeter I could sacrifice should it turn out to be WAY too high voltage.  When I fed the primary with ~33VAC I got around 145V so when using 230V I should be able to get close to 1kV AC. Not as much as I hoped but it will have to do. DC voltage should be close to 1,3kV under load I suspect. The filament transformer on the other hand looks to be broken. I will have to make some measurements on it.
« Last Edit: November 07, 2018, 09:42:08 AM by kamelryttarn »

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 851
  • Karma: +7/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Usable vacuum tube?
« Reply #3 on: November 07, 2018, 12:23:30 PM »
You got it right, either do a low voltage input test and just multiply it up to full input voltage or you can also look up the input impedance of your multimeter and add 9 or 10MOhm to get a 1:10 division.

You could make a 5VAC heater transformer yourself, its most likely not more than 5-6 turns on any regular mains transformer where you remove the secondary winding for a new high current winding.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline kamelryttarn

  • High Voltage Experimenter
  • **
  • Posts: 87
  • Karma: +0/-0
    • View Profile
Re: Usable vacuum tube?
« Reply #4 on: November 07, 2018, 02:31:19 PM »
You got it right, either do a low voltage input test and just multiply it up to full input voltage or you can also look up the input impedance of your multimeter and add 9 or 10MOhm to get a 1:10 division.

You could make a 5VAC heater transformer yourself, its most likely not more than 5-6 turns on any regular mains transformer where you remove the secondary winding for a new high current winding.

Sounds like a great little project. I actually think the filament transformer I got with the tube was made that way but it looks like the windings overheated. This will be my first ever rewind so it will be exciting and educational, although not very high tech. :)

Offline kamelryttarn

  • High Voltage Experimenter
  • **
  • Posts: 87
  • Karma: +0/-0
    • View Profile
Re: Usable vacuum tube?
« Reply #5 on: November 12, 2018, 12:57:26 PM »
I stripped the transformer bobbin of the secondary windings. Beneath the filament winding there was an unknown winding but since I will only use it for the tube filament I removed that one as well. Can anyone explain why this bobbin has two separate sections for primary and secondary windings when I can usually only find bobbins with a single space for both windings? This one seem much easier to deal with as a hobbyist.
« Last Edit: November 13, 2018, 11:23:18 AM by kamelryttarn »

Offline sjsimmo

  • High Voltage Enthusiast
  • *
  • Posts: 29
  • Karma: +2/-0
  • Australia
    • View Profile
Re: Usable vacuum tube?
« Reply #6 on: November 22, 2018, 01:17:32 AM »
The separate sections for primary and secondary are generally to increase the safety of the transformer. The bobbin acts as an isolator, and is a lot easier to manufacture to code. Of course, having windings on the same bobbin increases coupling, and thus efficiency (in most cases), but it's cheaper and safer to use seperate sections for mains isolation.  :)
I like my food cooked with lightning.

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 851
  • Karma: +7/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Usable vacuum tube?
« Reply #7 on: November 22, 2018, 11:36:49 AM »
It all comes down to the class of transformer that you are willing to invest in, so its all a design option what kind of physical size or temperature rise you will allow.

If you really need to make a small transformer, you are forced to design it for a higher temperature and thus you need to use materials from a higher insulation class, making it more expensive, but space was your priority. The other way around you can as seen with MOTs dont care about size and you can manufacturer it cheaper.

See more here: https://en.wikipedia.org/wiki/Insulation_system
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Usable vacuum tube?
« Reply #7 on: November 22, 2018, 11:36:49 AM »

 


* Recent Topics and Posts

post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
Today at 11:07:22 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
Today at 08:08:58 AM
post Re: How to calculate VA rating and other things for Ferrite Core? (SMPS)
[Transformer (ferrite core)]
sjsimmo
Today at 01:24:15 AM
post How to calculate VA rating and other things for Ferrite Core? (SMPS)
[Transformer (ferrite core)]
FilipŠebík
January 18, 2019, 07:32:38 PM
post Re: How to design a 7.5kV AC source?
[Transformer (ferrite core)]
profdc9
January 18, 2019, 04:25:14 PM
post How to design a 7.5kV AC source?
[Transformer (ferrite core)]
CristianM
January 18, 2019, 03:48:06 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
the_anomaly
January 17, 2019, 02:01:36 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 16, 2019, 04:26:38 AM
post AC vs DC fuses, high current, explosive destructive testing and theory
[Capacitor banks]
Mads Barnkob
January 15, 2019, 09:48:48 PM
post Re: My X-Ray Machine
[X-ray]
neukyhm
January 15, 2019, 10:51:46 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 14, 2019, 05:08:38 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
the_anomaly
January 14, 2019, 01:15:53 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
January 14, 2019, 12:22:07 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 11, 2019, 05:10:39 AM
post Re: My X-Ray Machine
[X-ray]
Max
January 10, 2019, 10:59:25 PM
post Re: 迎词、来
[General chatting]
profdc9
January 10, 2019, 06:56:59 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 10, 2019, 05:33:48 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
black.yang
January 10, 2019, 02:11:58 AM
post Re: My X-Ray Machine
[X-ray]
Mads Barnkob
January 09, 2019, 09:14:59 PM
post Acoustic spectra of sung vowels by the FFT analyzer HP 3561A
[Electronic circuits]
Physikfan
January 08, 2019, 08:44:16 PM
post Re: IGBT failure in DRSSTC
[Dual Resonant Solid State Tesla coils]
Felix Bieri
January 08, 2019, 05:33:55 PM
post Re: Huawei RRU3928 1800MHz radio base station teardown (part 1 of 2)
[Radio frequency]
Mads Barnkob
January 08, 2019, 08:25:08 AM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
flyglas
January 08, 2019, 08:25:02 AM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
Hydron
January 08, 2019, 02:01:50 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Hydron
January 07, 2019, 10:23:38 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 07, 2019, 08:53:32 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 07, 2019, 08:17:44 PM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
January 07, 2019, 07:37:53 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Uspring
January 07, 2019, 01:30:36 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 07, 2019, 12:43:26 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Hydron
January 07, 2019, 08:09:49 AM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
NEYi
January 07, 2019, 07:43:50 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
January 07, 2019, 06:48:06 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
January 07, 2019, 06:39:56 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 06, 2019, 09:23:19 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 06, 2019, 07:11:25 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Uspring
January 06, 2019, 07:02:14 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
flyglas
January 06, 2019, 12:43:46 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 06, 2019, 11:55:09 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
TDAF
January 06, 2019, 09:48:06 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
TDAF
January 06, 2019, 09:45:17 AM
post 关于: 这个便宜的 drsstc 驱动程序从 aliexpress 1.3 b 类型?
[Dual Resonant Solid State Tesla coils]
black.yang
January 06, 2019, 08:34:46 AM
post 迎词、来
[General chatting]
black.yang
January 06, 2019, 08:20:21 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
flyrod
January 06, 2019, 12:34:15 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 05, 2019, 05:27:23 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
flyrod
January 05, 2019, 03:46:29 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 05, 2019, 09:51:10 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
January 04, 2019, 11:02:25 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 03, 2019, 08:38:15 PM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
flyglas
January 03, 2019, 08:15:48 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30