Author Topic: SSTC-Interrupter Audio + PWM PCB Rev 1.0  (Read 478 times)

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +4/-0
    • View Profile
SSTC-Interrupter Audio + PWM PCB Rev 1.0
« on: November 04, 2018, 04:14:58 PM »
Hi Guys!

As I already said in another post, I worked on a SSTC-Interrupter PCB. Same rules as before. It's not my schematic. If you want to know more about the schematic visit: http://kaizerpowerelectronics.dk/tesla-coils/musical-sstcdrsstc-interrupter/

Waring: It could contain errors so better check the circuit for yourself

Edit: Guess what, there is an error, the holes for the resistors are not long enough. It should still be functional, just ugly.

PCB:


Documentation:
* SSTC-Interrupter Audio PWM.pdf
« Last Edit: December 20, 2018, 03:33:29 PM by Fumeaux »

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 951
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: SSTC-Interrupter Audio + PWM PCB Rev 1.0
« Reply #1 on: November 05, 2018, 01:07:33 PM »
Thanks for also sharing this little neat interrupter + audio board :)

With SW1 it can only be either normal or audio interrupter? In my SSTC2 schematic I noted that to run CW mode, the ENBL pin of the UCCs should be tied to +12V (a earlier version I had just left it floating, which worked for me, but gave problems for other builders)

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +4/-0
    • View Profile
Re: SSTC-Interrupter Audio + PWM PCB Rev 1.0
« Reply #2 on: November 05, 2018, 06:17:13 PM »
Yes SW1 just toggles between audio and pwm, my switch is a 2x 1/0/1 so i can leave the pin floating. My pll-board has a 12V-pin next to the INT-IN-pin so you can use CW via my pll-board without having an interrupter board. You can bridge them or solder wires to it, with a switch. I did look at the schematic of the ucc's and they have a pullup resistor intergrated. Which means, with proper shielding, it should even work without any further customisations.


High Voltage Forum

Re: SSTC-Interrupter Audio + PWM PCB Rev 1.0
« Reply #2 on: November 05, 2018, 06:17:13 PM »

 


* Recent Topics and Posts

post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Laci
Today at 12:09:13 PM
post Re: New small SSTC
[Solid state Tesla coils]
Fumeaux
Today at 10:52:08 AM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
Today at 09:39:16 AM
post Re: Si-wafers, ideas?
[Electronic circuits]
rikkitikkitavi
April 20, 2019, 12:11:28 PM
post Re: Si-wafers, ideas?
[Electronic circuits]
Mads Barnkob
April 20, 2019, 10:50:08 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 20, 2019, 09:48:57 AM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
April 20, 2019, 08:50:54 AM
post Si-wafers, ideas?
[Electronic circuits]
rikkitikkitavi
April 20, 2019, 06:55:07 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 20, 2019, 12:29:59 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
April 19, 2019, 11:20:04 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
April 19, 2019, 09:51:51 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 09:51:07 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Seb555
April 19, 2019, 09:16:51 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 19, 2019, 09:05:15 PM
post Re: New small SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 08:53:35 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 08:50:36 PM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
April 19, 2019, 08:23:49 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Seb555
April 19, 2019, 07:46:08 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 10:03:59 AM
post Troubleshooting my first SSTC
[Solid state Tesla coils]
Seb555
April 19, 2019, 08:14:08 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 18, 2019, 10:33:01 PM
post Re: New small SSTC
[Solid state Tesla coils]
Mads Barnkob
April 18, 2019, 10:28:28 PM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
April 18, 2019, 10:24:33 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
April 18, 2019, 10:13:06 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
April 18, 2019, 09:51:49 PM
post Re: Question about secondary
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 09:26:14 PM
post Re: Question about secondary
[Spark gap Tesla coils]
dexter
April 18, 2019, 09:20:15 PM
post Which way would be correct (for primary)
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 09:10:30 PM
post Re: Question about secondary
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 08:01:36 PM
post Re: Question about secondary
[Spark gap Tesla coils]
Fumeaux
April 18, 2019, 07:04:40 PM
post Question about secondary
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 06:32:18 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
DICKEYBIRD
April 18, 2019, 04:32:55 PM
post Re: Resisitors
[Spark gap Tesla coils]
thedoc298
April 17, 2019, 11:12:06 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
April 17, 2019, 10:44:02 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Laci
April 17, 2019, 09:38:39 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Fumeaux
April 17, 2019, 09:29:05 PM
post Re: Would this be about right or not.
[Spark gap Tesla coils]
thedoc298
April 17, 2019, 09:22:07 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
bogdan
April 17, 2019, 09:08:08 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 17, 2019, 09:01:40 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Laci
April 17, 2019, 08:55:48 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 17, 2019, 08:51:47 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Fumeaux
April 17, 2019, 08:42:33 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 17, 2019, 08:34:44 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 17, 2019, 08:22:30 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Bambinz
April 17, 2019, 08:16:07 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 17, 2019, 08:14:52 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
bogdan
April 17, 2019, 07:55:29 PM
post Teach your kids electronics
[Beginners]
Mads Barnkob
April 17, 2019, 11:51:59 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 17, 2019, 09:53:36 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 16, 2019, 08:46:05 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30