Author Topic: SSTC-Interrupter Audio + PWM PCB Rev 1.0  (Read 792 times)

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 64
  • Karma: +7/-0
    • View Profile
SSTC-Interrupter Audio + PWM PCB Rev 1.0
« on: November 04, 2018, 04:14:58 PM »
Hi Guys!

As I already said in another post, I worked on a SSTC-Interrupter PCB. Same rules as before. It's not my schematic. If you want to know more about the schematic visit: http://kaizerpowerelectronics.dk/tesla-coils/musical-sstcdrsstc-interrupter/

Waring: It could contain errors so better check the circuit for yourself

Edit: Guess what, there is an error, the holes for the resistors are not long enough. It should still be functional, just ugly.

PCB:


Documentation:
* SSTC-Interrupter Audio PWM.pdf
« Last Edit: December 20, 2018, 03:33:29 PM by Fumeaux »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1071
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: SSTC-Interrupter Audio + PWM PCB Rev 1.0
« Reply #1 on: November 05, 2018, 01:07:33 PM »
Thanks for also sharing this little neat interrupter + audio board :)

With SW1 it can only be either normal or audio interrupter? In my SSTC2 schematic I noted that to run CW mode, the ENBL pin of the UCCs should be tied to +12V (a earlier version I had just left it floating, which worked for me, but gave problems for other builders)

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 64
  • Karma: +7/-0
    • View Profile
Re: SSTC-Interrupter Audio + PWM PCB Rev 1.0
« Reply #2 on: November 05, 2018, 06:17:13 PM »
Yes SW1 just toggles between audio and pwm, my switch is a 2x 1/0/1 so i can leave the pin floating. My pll-board has a 12V-pin next to the INT-IN-pin so you can use CW via my pll-board without having an interrupter board. You can bridge them or solder wires to it, with a switch. I did look at the schematic of the ucc's and they have a pullup resistor intergrated. Which means, with proper shielding, it should even work without any further customisations.


High Voltage Forum

Re: SSTC-Interrupter Audio + PWM PCB Rev 1.0
« Reply #2 on: November 05, 2018, 06:17:13 PM »

 


* Recent Topics and Posts

post HV Pulser/Switcher
[Electronic circuits]
magnetic_fields
Today at 12:36:58 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
rikkitikkitavi
Today at 07:55:15 AM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
MrFox
August 21, 2019, 10:51:21 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 21, 2019, 03:59:47 AM
post Heavily improvised DRSSTC
[Dual Resonant Solid State Tesla coils]
Grzegorz2121
August 21, 2019, 01:36:21 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Grzegorz2121
August 21, 2019, 01:10:06 AM
post Re: adventures in homemade flyback bobbins.
[Transformer (ferrite core)]
ElectroXa
August 20, 2019, 02:22:09 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 19, 2019, 09:08:12 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
August 19, 2019, 02:27:06 PM
post Flashing light prize 2019
[Electronic circuits]
Avalanche
August 19, 2019, 02:12:41 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Hydron
August 19, 2019, 10:44:35 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
August 19, 2019, 07:37:07 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 19, 2019, 03:29:24 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 18, 2019, 05:05:24 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
August 18, 2019, 01:04:35 PM
post Re: You would think this would be easy to find.
[Spark gap Tesla coils]
thedoc298
August 17, 2019, 11:09:16 PM
post Re: You would think this would be easy to find.
[Spark gap Tesla coils]
thedoc298
August 17, 2019, 11:00:32 PM
post Re: You would think this would be easy to find.
[Spark gap Tesla coils]
Fumeaux
August 17, 2019, 09:44:07 PM
post You would think this would be easy to find.
[Spark gap Tesla coils]
thedoc298
August 17, 2019, 09:01:00 PM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 17, 2019, 08:06:42 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 17, 2019, 10:45:26 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 17, 2019, 06:21:45 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
August 17, 2019, 12:59:20 AM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
fnordest
August 17, 2019, 12:18:48 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:34:46 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
Mads Barnkob
August 16, 2019, 10:26:19 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:19:18 PM
post Re: [Development] Project of an SSTC driver.
[Solid state Tesla coils]
Mads Barnkob
August 16, 2019, 10:07:31 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
T3sl4co1l
August 16, 2019, 09:28:35 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
ElectroXa
August 16, 2019, 09:17:04 PM
post Re: ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
T3sl4co1l
August 16, 2019, 09:14:36 PM
post ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
Mads Barnkob
August 16, 2019, 08:03:18 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 16, 2019, 01:49:53 PM
post Suitable capacitors and switches? 10kV
[Capacitor banks]
MrFox
August 16, 2019, 12:21:36 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 16, 2019, 11:22:45 AM
post Re: Small Phase change build R600a
[General chatting]
DashApple
August 15, 2019, 06:23:40 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
rikkitikkitavi
August 15, 2019, 06:17:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 15, 2019, 01:51:04 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 14, 2019, 07:05:57 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
August 14, 2019, 03:42:34 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 02:56:49 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
ElectroXa
August 14, 2019, 01:42:21 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 14, 2019, 12:53:10 PM
post Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 09:22:21 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 14, 2019, 04:39:11 AM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 13, 2019, 07:10:31 PM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
MRMILSTAR
August 13, 2019, 05:17:23 AM
post MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 12, 2019, 09:54:35 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 12, 2019, 08:40:16 PM
post Re: Small Phase change build R600a
[General chatting]
Hydron
August 12, 2019, 07:27:23 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30