Author Topic: SSTC-Driver PCB 1.2  (Read 404 times)

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +4/-0
    • View Profile
SSTC-Driver PCB 1.2
« on: October 30, 2018, 08:16:30 AM »
Hi guys!

I have been working on a PCB template for the standard cd4046 sstc driver you find all over the internet (original by scopeboy.com/Steve Conner). I didn't design any of this, I just added a second pair for each UCC, inorder to drive these bigger GDT's too, without breaking a sweat. You can just use two instead of four UCC's but I went more indept in my documentation. If you want to know something, just let me know.

Now here's the deal. I am willing to share the gerberfile and the component list with you, to use for your project's. But there are a few points I want to clarify:
  • I don't want anyone making money on this.
  • It is not finished and I still update the files.
  • I haven't tested this design yet.


* PLL-SSTC-Driver Rev 1.2.pdf

For anyone interested: I am also working on an interrupter board with staccato interrupting. I will probably upload them later on too. If anyone sees any design flaws please let me know.

« Last Edit: November 06, 2018, 04:19:52 PM by Fumeaux »

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 951
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: SSTC-Driver PCB
« Reply #1 on: October 30, 2018, 12:21:52 PM »
Hi Fumeaux and welcome to HVF :)

Thank you for sharing the design and files.

I can not open the files from my current location to check the routing, so I just wanted to ask if you have all unused inputs tied as specified in the datasheet "Unused inputs must be connected to VDD, VSS, or another input". This is often a root cause for instability when inputs are left floating and they can cross talk internally in the IC.

Just for reference to everyone else, the original source and comments from Steve Conner: http://www.scopeboy.com/tesla/dwsstc/wk2.html
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +4/-0
    • View Profile
Re: SSTC-Driver PCB
« Reply #2 on: October 30, 2018, 01:53:32 PM »
Hi Mads!

Thank you for your tip. I made sure that i only have the pins not connected, that others didn't connect too, so it should be fine (those are just outputs, no input is floating).

It's great to be here, cheers.
« Last Edit: October 30, 2018, 03:04:01 PM by Fumeaux »

High Voltage Forum

Re: SSTC-Driver PCB
« Reply #2 on: October 30, 2018, 01:53:32 PM »

 


* Recent Topics and Posts

post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Laci
Today at 12:09:13 PM
post Re: New small SSTC
[Solid state Tesla coils]
Fumeaux
Today at 10:52:08 AM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
Today at 09:39:16 AM
post Re: Si-wafers, ideas?
[Electronic circuits]
rikkitikkitavi
April 20, 2019, 12:11:28 PM
post Re: Si-wafers, ideas?
[Electronic circuits]
Mads Barnkob
April 20, 2019, 10:50:08 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 20, 2019, 09:48:57 AM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
April 20, 2019, 08:50:54 AM
post Si-wafers, ideas?
[Electronic circuits]
rikkitikkitavi
April 20, 2019, 06:55:07 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 20, 2019, 12:29:59 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
April 19, 2019, 11:20:04 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
April 19, 2019, 09:51:51 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 09:51:07 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Seb555
April 19, 2019, 09:16:51 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 19, 2019, 09:05:15 PM
post Re: New small SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 08:53:35 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 08:50:36 PM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
April 19, 2019, 08:23:49 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Seb555
April 19, 2019, 07:46:08 PM
post Re: Troubleshooting my first SSTC
[Solid state Tesla coils]
Fumeaux
April 19, 2019, 10:03:59 AM
post Troubleshooting my first SSTC
[Solid state Tesla coils]
Seb555
April 19, 2019, 08:14:08 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 18, 2019, 10:33:01 PM
post Re: New small SSTC
[Solid state Tesla coils]
Mads Barnkob
April 18, 2019, 10:28:28 PM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
April 18, 2019, 10:24:33 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
April 18, 2019, 10:13:06 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
April 18, 2019, 09:51:49 PM
post Re: Question about secondary
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 09:26:14 PM
post Re: Question about secondary
[Spark gap Tesla coils]
dexter
April 18, 2019, 09:20:15 PM
post Which way would be correct (for primary)
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 09:10:30 PM
post Re: Question about secondary
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 08:01:36 PM
post Re: Question about secondary
[Spark gap Tesla coils]
Fumeaux
April 18, 2019, 07:04:40 PM
post Question about secondary
[Spark gap Tesla coils]
thedoc298
April 18, 2019, 06:32:18 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
DICKEYBIRD
April 18, 2019, 04:32:55 PM
post Re: Resisitors
[Spark gap Tesla coils]
thedoc298
April 17, 2019, 11:12:06 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
April 17, 2019, 10:44:02 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Laci
April 17, 2019, 09:38:39 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Fumeaux
April 17, 2019, 09:29:05 PM
post Re: Would this be about right or not.
[Spark gap Tesla coils]
thedoc298
April 17, 2019, 09:22:07 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
bogdan
April 17, 2019, 09:08:08 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 17, 2019, 09:01:40 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Laci
April 17, 2019, 08:55:48 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 17, 2019, 08:51:47 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Fumeaux
April 17, 2019, 08:42:33 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 17, 2019, 08:34:44 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 17, 2019, 08:22:30 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Bambinz
April 17, 2019, 08:16:07 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 17, 2019, 08:14:52 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
bogdan
April 17, 2019, 07:55:29 PM
post Teach your kids electronics
[Beginners]
Mads Barnkob
April 17, 2019, 11:51:59 AM
post Re: Secondary Design Tool
[Dual Resonant Solid State Tesla coils]
Fumeaux
April 17, 2019, 09:53:36 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
April 16, 2019, 08:46:05 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30