Author Topic: 15000$ (1990's) Sony 3CCD Analogue color camera giveaway! (shipping costs apply)  (Read 390 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 926
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
As a part of Dave from eevblog gave me the opportunity to reach a larger audience through the guest videos, I hoped that I found a new owner for this camera and that it would bring something good to another electronics hobbyist. Unfortunately I did not find anyone back then, so I will give it another try. (edit: which also failed)

edit: You can have this camera for free! You only have to pay for shipping costs and be within the few rules stated further down.

/>
It is a Sony BVP-7AP Color Video Camera which is meant to be used with the CCU-355/P, this is the central control unit that would sit in a car with the satellite dish or be mounted in the mixer room of a studio.

It has nice viewfinder and properly a good shotgun microphone. It has a Fujinon 14x motorized zoom lens. It has 3 separate color sensors, hence the 3CCD brand, they sit in a optical filter for Red, Green and Blue.

It delivers a 720x576 lines PAL encoded signal, form the test output, the combined CCU output is a mix of picture, sound and internal communication on a special carrier frequency.

It has seen some water from bad storage, which never entered the electronics, but the UV filter behind the lens seems to have some glass pest and the exterior of the zoom lens and view finder has some aluminium corrosion. But it seems fully functional.

This is a heavy item (6kg) and shipping might be in the range of 60€ for Europe (even worse overseas), cost can vary from country to country, please ask for specific price if needed.

I will also include the DVR-USB converter and the dodgy software that came with it :)

The "contest" rules

0. Watch the video to get an idea of the electronics that is inside
1. Present a short description of a project that you want to use this camera for
2. Projects that will focus on digitalizing the analogue sensors for a new purpose will be considered front runners
edit: 3. I pick the winning idea on October 1st 2018
4. Show the result here on the forum
« Last Edit: September 17, 2018, 08:06:00 PM by Mads Barnkob »
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum


 


* Recent Topics and Posts

post Re: WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
FilipŠebík
Today at 08:39:46 AM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
Today at 08:35:33 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
flyrod
Today at 04:07:24 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Thunderstruck
March 23, 2019, 10:07:54 PM
post Re: WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
Mads Barnkob
March 23, 2019, 04:07:55 PM
post WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
Fumeaux
March 23, 2019, 02:12:48 PM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
March 23, 2019, 08:03:58 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 23, 2019, 01:50:47 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Hydron
March 23, 2019, 12:11:10 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 22, 2019, 08:19:21 PM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
profdc9
March 22, 2019, 06:39:37 PM
post Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Fumeaux
March 22, 2019, 05:51:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 22, 2019, 03:46:16 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
kamelryttarn
March 22, 2019, 11:25:19 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 22, 2019, 10:56:16 AM
post Re: looking for PCB creating software
[Printed Circuit Board]
Teravolt
March 22, 2019, 06:02:15 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 21, 2019, 11:04:48 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Hydron
March 21, 2019, 07:51:23 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 21, 2019, 07:09:05 PM
post Re: looking for PCB creating software
[Printed Circuit Board]
kamelryttarn
March 21, 2019, 02:26:09 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Uspring
March 21, 2019, 11:57:53 AM
post Re: GDT Experiments
[Solid state Tesla coils]
Teravolt
March 20, 2019, 11:15:50 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Thunderstruck
March 20, 2019, 09:07:04 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 20, 2019, 05:18:07 PM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
March 20, 2019, 03:52:15 PM
post Re: New small SSTC
[Solid state Tesla coils]
Mads Barnkob
March 20, 2019, 01:23:52 PM
post Re: GDT Experiments
[Solid state Tesla coils]
T3sl4co1l
March 20, 2019, 01:18:29 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Mads Barnkob
March 20, 2019, 01:06:24 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 20, 2019, 01:00:46 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 20, 2019, 12:41:22 PM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 10:02:41 PM
post Re: Keep or throw away ?
[Beginners]
Hydron
March 19, 2019, 08:14:33 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 05:12:03 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Experimentonomen
March 19, 2019, 01:32:32 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
March 19, 2019, 12:20:34 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 19, 2019, 12:15:22 PM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Mads Barnkob
March 19, 2019, 10:46:50 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 09:11:09 AM
post Re: Keep or throw away ?
[Beginners]
Mads Barnkob
March 19, 2019, 08:24:31 AM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 01:51:51 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 18, 2019, 09:56:42 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Weston
March 18, 2019, 07:55:52 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 18, 2019, 06:11:07 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Hydron
March 18, 2019, 02:27:35 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Uspring
March 18, 2019, 12:52:35 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
FilipŠebík
March 18, 2019, 12:22:58 PM
post New small SSTC
[Solid state Tesla coils]
Bambinz
March 18, 2019, 11:46:18 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Bambinz
March 18, 2019, 11:29:02 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 18, 2019, 10:35:04 AM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Marty
March 18, 2019, 05:32:43 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30