Author Topic: Rotoray spark gap motor power  (Read 1637 times)

Offline Patric

  • High Voltage Enthusiast
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Rotoray spark gap motor power
« on: August 26, 2018, 08:18:56 AM »
Hi,
here's a newbie question: all of these RSG synchronous motors and also those converted induction motors, they seem to be immensely oversized for the job they actually need to do. I mean all they do is turn a (considerably heavy) disk. Ok, accelerating it to ops speeds does take some torque, but once it's spinning, there should be hardly any torque needed right? So why are we seeing > 1kW monsters wheeling around here?  ??? Is it in fact the necessary starting torque to sync up with mains frequency? Scratching my head on that one.
Cheers, Patric

Offline the_anomaly

  • High Voltage Enthusiast
  • *
  • Posts: 25
  • Karma: +1/-0
    • View Profile
Re: Rotoray spark gap motor power
« Reply #1 on: August 26, 2018, 03:21:35 PM »
I built a rotary spark gap years ago with a small DC motor.  I liked being able to control the frequency with a variac.  I think it has to do with availability; 1-2hp motors are very common and cheap to buy used.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1457
  • Karma: +24/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Rotoray spark gap motor power
« Reply #2 on: August 26, 2018, 10:39:24 PM »
With a rotating disc with a few studs there is not much load to drive, unless there is some spark gap forces I am not aware of that influences the rotation force.

But as the disc or arms get bigger, you introduce a great deal of air resistance and bigger motors are needed. F.ex. check out the size of the RSG from Bill Wysocks 13M system: https://teslauniverse.com/tesla-news/galleries/bill-wysocks-model-13m

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 242
  • Karma: +12/-0
    • View Profile
Re: Rotoray spark gap motor power
« Reply #3 on: August 29, 2018, 07:23:37 PM »
I used a $15 angle grinder for an asynchronous rotary spark gap and controlled its speed with a triac (like a lamp dimmer but higher current).  These spin at very high RPMs and don't have a lot of torque, because angle grinders cut with speed not force.  I was using a phenolic disc with screw heads which I think is probably around the same moment of inertia than a stone cutting disc.  Many synchronous motors are designed for heavier duty loads, with maybe the exception of timing motors, as brushed motors or shaded pole motors tend to be used for lighter loads.

Dan

Hi,
here's a newbie question: all of these RSG synchronous motors and also those converted induction motors, they seem to be immensely oversized for the job they actually need to do. I mean all they do is turn a (considerably heavy) disk. Ok, accelerating it to ops speeds does take some torque, but once it's spinning, there should be hardly any torque needed right? So why are we seeing > 1kW monsters wheeling around here?  ??? Is it in fact the necessary starting torque to sync up with mains frequency? Scratching my head on that one.
Cheers, Patric

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 207
  • Karma: +4/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Rotoray spark gap motor power
« Reply #4 on: June 15, 2019, 06:35:48 AM »
My SRSG uses a modified 1/2 HP 3600 RPM induction motor. The rotor is a 10" diameter 1/2" thick piece of G10. It has 4 flying tungsten electrodes. It comes up to speed in a few seconds. At speed, it moves a LOT of air. It is just about the right power. If you use an under-powered motor, it will not stay synchronous.
« Last Edit: June 16, 2019, 05:21:18 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

High Voltage Forum

Re: Rotoray spark gap motor power
« Reply #4 on: June 15, 2019, 06:35:48 AM »

 


* Recent Topics and Posts

post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
SteveN87
Today at 07:16:43 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
Today at 02:54:33 PM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
TMaxElectronics
Today at 12:42:50 PM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
Twospoons
Today at 12:23:58 PM
post Re: Single sided use of Xray XFMR
[Transformer (Ferrite Core)]
HighVoltageRulezz
Today at 11:15:07 AM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
davekni
Today at 04:41:24 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
davekni
Today at 04:06:09 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
TMaxElectronics
Today at 01:58:47 AM
post Re: Charging a LiPo Battery with an LED driver
[Electronic Circuits]
Twospoons
Today at 12:56:02 AM
post Charging a LiPo Battery with an LED driver
[Electronic Circuits]
TMaxElectronics
August 11, 2020, 11:24:18 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
August 11, 2020, 06:34:05 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 11, 2020, 04:19:01 AM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 11, 2020, 04:17:27 AM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 11, 2020, 04:10:34 AM
post Re: Single sided use of Xray XFMR
[Transformer (Ferrite Core)]
klugesmith
August 11, 2020, 03:33:02 AM
post Single sided use of Xray XFMR
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 10, 2020, 12:23:05 PM
post Re: XRay Tank- any ideas about what is inside
[Transformer (Ferrite Core)]
HighVoltageRulezz
August 10, 2020, 12:18:04 PM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
johnf
August 10, 2020, 10:24:54 AM
post Re: making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
davekni
August 10, 2020, 06:20:04 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
RoadReaper
August 10, 2020, 05:40:19 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
August 10, 2020, 02:07:26 AM
post making HV bobbins for ferrite transformers
[Transformer (Ferrite Core)]
Teravolt
August 10, 2020, 01:27:22 AM
post A Tesla coil and an antenna
[General Chat]
TheFreq
August 09, 2020, 09:02:32 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Steve Ward
August 08, 2020, 10:22:04 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
T3sl4co1l
August 08, 2020, 03:36:40 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
acmq
August 08, 2020, 02:07:52 AM
post Re: LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
LesWright
August 06, 2020, 10:20:12 PM
post Re: LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
Weston
August 06, 2020, 08:45:59 PM
post Re: Cathodes in Compact Fluorescent Lamps
[Light, Lasers and Optics]
klugesmith
August 06, 2020, 05:41:04 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 06, 2020, 03:53:58 PM
post LSI Nitrogen Laser tear-down and Homemade TEA Nitrogen and Dye Lasers
[Light, Lasers and Optics]
LesWright
August 06, 2020, 03:28:14 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 06, 2020, 12:59:03 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
August 06, 2020, 10:51:43 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 06, 2020, 08:40:57 AM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 06, 2020, 03:22:38 AM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
davekni
August 05, 2020, 11:48:55 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 05, 2020, 11:37:13 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 05, 2020, 08:01:11 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 05, 2020, 06:34:08 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
Uspring
August 05, 2020, 12:56:32 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
August 05, 2020, 12:55:52 PM
post Re: Bipolar high voltage multiplier project - more than 70cm hot arc discharge
[Voltage Multipliers]
Teravolt
August 04, 2020, 09:21:09 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
johnf
August 04, 2020, 09:16:55 PM
post Re: Does anyone know how this site works.
[General Chat]
thedoc298
August 04, 2020, 05:53:03 PM
post Re: Does anyone know how this site works.
[General Chat]
thedoc298
August 04, 2020, 05:51:03 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Lightning On Demand
August 04, 2020, 05:17:26 PM
post Re: Fun with wireless power
[Solid State Tesla Coils (SSTC)]
Max
August 04, 2020, 02:14:56 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
August 04, 2020, 02:08:07 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
August 04, 2020, 10:48:35 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 04, 2020, 10:02:39 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal