Author Topic: Teardown of a Eaton PowerWare 60kVA UPS system  (Read 362 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 920
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Teardown of a Eaton PowerWare 60kVA UPS system
« on: August 09, 2018, 12:25:32 PM »
This is the teardown of a large 2x 60 kVA Eaton UPS system, first is the teardown video and below are some pictures and a little description of the components.

/>
Here is a picture of a single 60 kVA system installed with battery and inverter cabinets



I am not quite sure if this was really a 60 kVA or a 90 kVA unit, as the cabinet had both stickers on it.



The cabinets were unfortunately badly damaged from crane handling when they were thrown out into the junk yard. I managed to scavenge input rectifier, capacitor bank and 5 inverters from the system.









The inverter boards consisted of 10x FS35R12W1T4 IGBT 3-phase full-bridge modules, 6 of them used for the output and 4 of them for the intermediate / battery charge inverters.  For details of the boards see the video at the top.

The inverter boards were pure with only IGBT and DC bus capacitors, so they are suitable for hacking into something else, maybe it is just the relatively low 70 A peak current handling of the modules that limits its use for other applications. I will post more about this in a future thread :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline rikkitikkitavi

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +1/-0
    • View Profile
Re: Teardown of a Eaton PowerWare 60kVA UPS system
« Reply #1 on: August 17, 2018, 03:42:01 PM »
Now that is a dumpster dive worth mentioning ! :)
A man can not have to many variacs

High Voltage Forum

Re: Teardown of a Eaton PowerWare 60kVA UPS system
« Reply #1 on: August 17, 2018, 03:42:01 PM »

 


* Recent Topics and Posts

post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 10:02:41 PM
post Re: Keep or throw away ?
[Beginners]
Hydron
March 19, 2019, 08:14:33 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 05:12:03 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Experimentonomen
March 19, 2019, 01:32:32 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
March 19, 2019, 12:20:34 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 19, 2019, 12:15:22 PM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Mads Barnkob
March 19, 2019, 10:46:50 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 09:11:09 AM
post Re: Keep or throw away ?
[Beginners]
Mads Barnkob
March 19, 2019, 08:24:31 AM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 01:51:51 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 18, 2019, 09:56:42 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Weston
March 18, 2019, 07:55:52 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 18, 2019, 06:11:07 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Hydron
March 18, 2019, 02:27:35 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Uspring
March 18, 2019, 12:52:35 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
FilipŠebík
March 18, 2019, 12:22:58 PM
post New small SSTC
[Solid state Tesla coils]
Bambinz
March 18, 2019, 11:46:18 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Bambinz
March 18, 2019, 11:29:02 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 18, 2019, 10:35:04 AM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Marty
March 18, 2019, 05:32:43 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Experimentonomen
March 17, 2019, 09:13:47 PM
post Re: DRSSTC Driver Logic
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
March 17, 2019, 04:08:33 PM
post Re: WTB: Large Heatsink with a Baseplate at least 10mm thick
[Sell / Buy / Trade]
Phoenix
March 17, 2019, 02:46:44 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
flyglas
March 17, 2019, 02:21:45 PM
post Re: DRSSTC Driver Logic
[Dual Resonant Solid State Tesla coils]
Laci
March 17, 2019, 01:54:47 PM
post Re: WTB: Large Heatsink with a Baseplate at least 10mm thick
[Sell / Buy / Trade]
Mads Barnkob
March 17, 2019, 10:15:16 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
FilipŠebík
March 17, 2019, 09:33:50 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Teravolt
March 17, 2019, 05:32:48 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Thunderstruck
March 17, 2019, 02:39:25 AM
post WTB: Large Heatsink with a Baseplate at least 10mm thick
[Sell / Buy / Trade]
Phoenix
March 16, 2019, 10:06:39 PM
post Re: Large Ferrite Core with IGBT-Brick Driver
[Transformer (ferrite core)]
rikkitikkitavi
March 16, 2019, 08:35:51 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Weston
March 16, 2019, 08:04:52 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
flyglas
March 16, 2019, 06:44:14 PM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
FilipŠebík
March 16, 2019, 09:57:55 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Thunderstruck
March 16, 2019, 09:40:55 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
FilipŠebík
March 16, 2019, 08:57:54 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Thunderstruck
March 16, 2019, 08:46:24 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
FilipŠebík
March 16, 2019, 08:27:24 AM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
March 16, 2019, 07:35:58 AM
post GDT Experiments
[Solid state Tesla coils]
Thunderstruck
March 16, 2019, 06:32:36 AM
post cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Weston
March 16, 2019, 06:01:44 AM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Thunderstruck
March 16, 2019, 05:46:38 AM
post Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
FilipŠebík
March 15, 2019, 10:11:53 PM
post Re: Large Ferrite Core with IGBT-Brick Driver
[Transformer (ferrite core)]
Mads Barnkob
March 15, 2019, 10:31:10 AM
post Re: Mechanical QCW !!
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 15, 2019, 09:44:59 AM
post Re: Large Ferrite Core with IGBT-Brick Driver
[Transformer (ferrite core)]
Hydron
March 15, 2019, 09:27:48 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 15, 2019, 08:49:01 AM
post Mechanical QCW !!
[Dual Resonant Solid State Tesla coils]
pentode
March 15, 2019, 08:33:23 AM
post Re: Piernas's Fast ZVS Mazzilli Driver
[Transformer (ferrite core)]
neukyhm
March 14, 2019, 11:30:12 PM
post Re: Large Ferrite Core with IGBT-Brick Driver
[Transformer (ferrite core)]
Phoenix
March 14, 2019, 11:18:04 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30