Author Topic: Teardown of a Eaton PowerWare 60kVA UPS system  (Read 368 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 926
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Teardown of a Eaton PowerWare 60kVA UPS system
« on: August 09, 2018, 12:25:32 PM »
This is the teardown of a large 2x 60 kVA Eaton UPS system, first is the teardown video and below are some pictures and a little description of the components.

/>
Here is a picture of a single 60 kVA system installed with battery and inverter cabinets



I am not quite sure if this was really a 60 kVA or a 90 kVA unit, as the cabinet had both stickers on it.



The cabinets were unfortunately badly damaged from crane handling when they were thrown out into the junk yard. I managed to scavenge input rectifier, capacitor bank and 5 inverters from the system.









The inverter boards consisted of 10x FS35R12W1T4 IGBT 3-phase full-bridge modules, 6 of them used for the output and 4 of them for the intermediate / battery charge inverters.  For details of the boards see the video at the top.

The inverter boards were pure with only IGBT and DC bus capacitors, so they are suitable for hacking into something else, maybe it is just the relatively low 70 A peak current handling of the modules that limits its use for other applications. I will post more about this in a future thread :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline rikkitikkitavi

  • High Voltage Enthusiast
  • *
  • Posts: 15
  • Karma: +1/-0
    • View Profile
Re: Teardown of a Eaton PowerWare 60kVA UPS system
« Reply #1 on: August 17, 2018, 03:42:01 PM »
Now that is a dumpster dive worth mentioning ! :)
A man can not have to many variacs

High Voltage Forum

Re: Teardown of a Eaton PowerWare 60kVA UPS system
« Reply #1 on: August 17, 2018, 03:42:01 PM »

 


* Recent Topics and Posts

post Re: WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
FilipŠebík
Today at 08:39:46 AM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
Today at 08:35:33 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
flyrod
Today at 04:07:24 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Thunderstruck
March 23, 2019, 10:07:54 PM
post Re: WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
Mads Barnkob
March 23, 2019, 04:07:55 PM
post WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
Fumeaux
March 23, 2019, 02:12:48 PM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
March 23, 2019, 08:03:58 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 23, 2019, 01:50:47 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Hydron
March 23, 2019, 12:11:10 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 22, 2019, 08:19:21 PM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
profdc9
March 22, 2019, 06:39:37 PM
post Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Fumeaux
March 22, 2019, 05:51:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 22, 2019, 03:46:16 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
kamelryttarn
March 22, 2019, 11:25:19 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 22, 2019, 10:56:16 AM
post Re: looking for PCB creating software
[Printed Circuit Board]
Teravolt
March 22, 2019, 06:02:15 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 21, 2019, 11:04:48 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Hydron
March 21, 2019, 07:51:23 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 21, 2019, 07:09:05 PM
post Re: looking for PCB creating software
[Printed Circuit Board]
kamelryttarn
March 21, 2019, 02:26:09 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Uspring
March 21, 2019, 11:57:53 AM
post Re: GDT Experiments
[Solid state Tesla coils]
Teravolt
March 20, 2019, 11:15:50 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Thunderstruck
March 20, 2019, 09:07:04 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 20, 2019, 05:18:07 PM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
March 20, 2019, 03:52:15 PM
post Re: New small SSTC
[Solid state Tesla coils]
Mads Barnkob
March 20, 2019, 01:23:52 PM
post Re: GDT Experiments
[Solid state Tesla coils]
T3sl4co1l
March 20, 2019, 01:18:29 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Mads Barnkob
March 20, 2019, 01:06:24 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 20, 2019, 01:00:46 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 20, 2019, 12:41:22 PM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 10:02:41 PM
post Re: Keep or throw away ?
[Beginners]
Hydron
March 19, 2019, 08:14:33 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 05:12:03 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Experimentonomen
March 19, 2019, 01:32:32 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
March 19, 2019, 12:20:34 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 19, 2019, 12:15:22 PM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Mads Barnkob
March 19, 2019, 10:46:50 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 09:11:09 AM
post Re: Keep or throw away ?
[Beginners]
Mads Barnkob
March 19, 2019, 08:24:31 AM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 01:51:51 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 18, 2019, 09:56:42 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Weston
March 18, 2019, 07:55:52 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 18, 2019, 06:11:07 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Hydron
March 18, 2019, 02:27:35 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Uspring
March 18, 2019, 12:52:35 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
FilipŠebík
March 18, 2019, 12:22:58 PM
post New small SSTC
[Solid state Tesla coils]
Bambinz
March 18, 2019, 11:46:18 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Bambinz
March 18, 2019, 11:29:02 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 18, 2019, 10:35:04 AM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Marty
March 18, 2019, 05:32:43 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30