Author Topic: Isn't there a better way to make a custom toroid?  (Read 275 times)

Offline Downunder35m

  • High Voltage Enthusiast
  • *
  • Posts: 25
  • Karma: +1/-2
    • View Profile
Isn't there a better way to make a custom toroid?
« on: August 04, 2018, 06:00:31 AM »
I looked around for sources of more or less well fabricated toroids.
Nothing in copper of course but at least some are available in aluminium.
But IMHO the prices I have seen do not justify the high price.
Back in my big spark gap days I mainly use tube cages or in some cases stianless steel spheres as a stack.
For a desktop model however this is not to my liking as one day I would like to have something that not just works but also looks nice.
On my tiny lathe I could try to make forms for rolling my own toroids but only to about a diameter of 15cm, thanks to being a tiny lathe...
So what other options for something with a really smooth and nice look are there that can be done on a hobby level?

Ducting, no...
Polystyrene rings, maybe but still a ton of work and definately not easy to get a mirror finnish...
Baking dishes, again maybe but hard to find something that would make a true donut or better still a toroid without major surgery.
And while doing all sorts of weird Ebay searches I found something that might be worth to consider.

What about 180° pipes?
Commonly used for cars and exhaust system in 3 and 4" but certainly also used in oher areas and diameters.
For some configurations it should be possible to get a suitable radius and pipe diameter to make a decent toroid...
But still not really something for a custom creation to fit a specific coil...
Or does anyone happen to know how to get a 60mm copper pipe into a smooth ring?
1.2mm thick walls too LOL

So I thought it should be possible to combine pipe bending with a slightly different cage cage design.
Sure someone has done it before but I could not find any references, so I will try to explain it:
If we take standard copper plumbing tubing then we can use springs or fill it with sand to bend it into any diameter the pipe allows for.
Using a suitable template like a PVC pipe, thick carboard tube or just wooden disks it should easy to create rings that create a donut from several copper rings.
Correct me if I am wrong but the "grooves" between the pipes should not be a problem for arcs as the pointy bit faces inwards?
And yes, I know that such a design would be really heavy but if done well it should look really nice once polished ;)

Last though: Conductive paint and/or electroplating/electrolyse things?
Every time I am welding stuff that needs corrosion protection I use zink or aluminium spray that also allwos to weld through if required later.
At least the aluminium type gives a semi gloss to satin result on smooth surfaces.
The zink based stuff looks more like a surface powdered in grey.
From experiments I know that for copper plating zink I need a cyanide based first plating bath and won't go that route again.
Aluminium should be straight forwards at least in theory.
During my tests I noticed that the aluminium parts often oxidise faster than what I am able to clean and move.
Was a race of often 10 or more rounds until I got an even coating of copper all around bigger parts.
But using aluminium spray as a base for this??
Proper paint that is conductive enough and not carbon based cost a small fortune...
Not to mention the problem of keeping a very light toroid submersed or being able to remove the filling when done without causing damage...

There must be an easy and relatively cheap way to make a proper toroid with a copper finnish that does not involve machining or expensive tools.
So what did I miss?
Would it make a difference if inside the toroid is a solid disk or just wires like on a bicycle wheel?

Offline Nijin

  • High Voltage Enthusiast
  • *
  • Posts: 14
  • Karma: +1/-0
    • View Profile
Re: Isn't there a better way to make a custom toroid?
« Reply #1 on: August 04, 2018, 11:25:14 AM »
I recommend you to make a toroid with multiple aluminium pipe. You can design it with JavaTC3D "ring toroid". This type of toroid has a greatter surface, a better look and you can adjust both diameter of the toroid.

I made a 104*28cm toroid with 7x 30mm alumimium pipes and It's the best toroid I've made even if bending 30mm pipe is very difficult. I recommend you to use more pipes with a lower diameter like 6 or 10mm depending the size of your toroid.

If you want more information about this type of toroid, you can check the facebook of Franzoli Electronics.
Everything is a fuse if you pass enough current

Offline Downunder35m

  • High Voltage Enthusiast
  • *
  • Posts: 25
  • Karma: +1/-2
    • View Profile
Re: Isn't there a better way to make a custom toroid?
« Reply #2 on: August 04, 2018, 07:16:57 PM »
So you are saying that apart from looks there is no realy benefit?
Id a pipe cage performs as good as a real toroid then I might have to reconsider my approach and go for simple instead.

Offline Nijin

  • High Voltage Enthusiast
  • *
  • Posts: 14
  • Karma: +1/-0
    • View Profile
Re: Isn't there a better way to make a custom toroid?
« Reply #3 on: August 04, 2018, 07:22:38 PM »
No, the most inportant benefit is the simplicity and the cost to make this kind of toroid. A spun toroid is difficult to find and expensive. With a skeleton toroid, you can adjust the height and the width and this will change electrical properties of the toroid.
Everything is a fuse if you pass enough current

High Voltage Forum

Re: Isn't there a better way to make a custom toroid?
« Reply #3 on: August 04, 2018, 07:22:38 PM »

 


* Recent Topics and Posts

post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
Today at 01:13:34 PM
post Re: spectral analysis of Tesla coils
[Spark gap Tesla coils]
Uspring
Today at 01:02:35 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Uspring
Today at 12:33:07 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
Today at 12:26:08 PM
post Re: Building of my first tesla coil
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
Today at 10:42:17 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
Today at 06:49:52 AM
post Re: Building of my first tesla coil
[Dual Resonant Solid State Tesla coils]
Skylex86
December 16, 2018, 09:09:13 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
December 16, 2018, 07:48:55 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
NordicGaben
December 16, 2018, 06:13:54 PM
post spectral analysis of Tesla coils
[Spark gap Tesla coils]
Physikfan
December 15, 2018, 02:24:20 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
DashApple
December 14, 2018, 10:21:25 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 14, 2018, 08:38:52 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Uspring
December 13, 2018, 12:23:30 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 12, 2018, 11:57:02 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 12, 2018, 01:15:30 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 12, 2018, 01:00:34 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 12, 2018, 11:45:08 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 11, 2018, 09:13:49 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 11, 2018, 12:03:54 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 10, 2018, 12:25:15 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 10, 2018, 11:13:38 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 10, 2018, 09:18:24 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Mads Barnkob
December 10, 2018, 09:13:37 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 10, 2018, 02:18:59 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
sjsimmo
December 09, 2018, 11:09:34 PM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Fumeaux
December 09, 2018, 10:23:38 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 09, 2018, 06:05:02 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Jesjes
December 09, 2018, 04:50:56 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Laci
December 08, 2018, 12:52:41 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 08, 2018, 09:51:47 AM
post Huawei RRU3928 1800MHz radio base station teardown (part 1 of 2)
[Radio frequency]
Mads Barnkob
December 06, 2018, 07:49:06 PM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Fumeaux
December 03, 2018, 10:35:13 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
sjsimmo
December 03, 2018, 08:40:43 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Jesjes
December 03, 2018, 05:31:29 AM
post Re: Hacking the IKEA 2000 Watt induction stove (5 parts)
[Electronic circuits]
chjarup
December 02, 2018, 11:44:14 PM
post SSTC-Driver PCB 1.3
[Printed Circuit Board]
Fumeaux
December 02, 2018, 10:25:23 PM
post Re: Hacking the IKEA 2000 Watt induction stove (5 parts)
[Electronic circuits]
Mads Barnkob
December 02, 2018, 04:23:16 PM
post Re: Hacking the IKEA 2000 Watt induction stove (5 parts)
[Electronic circuits]
chjarup
December 02, 2018, 12:12:57 PM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Mads Barnkob
December 02, 2018, 09:57:04 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Fumeaux
December 01, 2018, 09:15:01 PM
post First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Jesjes
December 01, 2018, 03:38:37 AM
post Re: How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Laci
November 29, 2018, 08:34:50 PM
post Re: How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Netzpfuscher
November 29, 2018, 09:18:47 AM
post Re: My X-Ray Machine
[X-ray]
neukyhm
November 28, 2018, 07:33:44 PM
post Re: My X-Ray Machine
[X-ray]
Mads Barnkob
November 28, 2018, 07:14:52 PM
post My X-Ray Machine
[X-ray]
neukyhm
November 28, 2018, 04:42:32 PM
post Re: How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
November 28, 2018, 09:55:58 AM
post How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Laci
November 27, 2018, 08:50:54 PM
post Re: My First SSTC
[Solid state Tesla coils]
sjsimmo
November 27, 2018, 09:56:16 AM
post Re: My First SSTC
[Solid state Tesla coils]
Mads Barnkob
November 27, 2018, 08:53:35 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30