Author Topic: Tuning Phaselead  (Read 259 times)

Offline Phoenix

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
Tuning Phaselead
« on: May 27, 2018, 12:21:09 PM »
Hello everybody,

I noticed the following thing when tuning phaselead on my DRSSTC: If i tune for the lowest amount of ringing i am getting slightly lower switching speeds (150ns). If I tune for a little bit of ringing i am getting faster switching speeds (60ns). The spikes are small and only 100V high. I am using 1200V IGBTs and my maximal input voltage is 370V DC so the spikes are not a problem.

My question is now should i tune for faster switching speeds or less ringing?

Greetings,
Phoenix


Offline Hydron

  • Administrator
  • High Voltage Technician
  • *****
  • Posts: 188
  • Karma: +4/-0
    • View Profile
Re: Tuning Phaselead
« Reply #1 on: May 27, 2018, 03:53:43 PM »
Slower switching speed isn't such an issue if it's at low current - losses scale with current.

I assume you have a CT (DIY or commercial) to scope the primary current? If so you should be able to look at the relative timing of the switching versus current to make sure it's near the zero crossing.

Getting it perfect is unlikely to be necessary unless you're really pushing the igbts way past their current rating or with spikes near the voltage rating - assuming you're not then I'd err on the side of switching early rather than late as that generally gives lower losses.

High Voltage Forum

Re: Tuning Phaselead
« Reply #1 on: May 27, 2018, 03:53:43 PM »

 


* Recent Topics and Posts

post spectral analysis of Tesla coils
[Spark gap Tesla coils]
Physikfan
December 15, 2018, 02:24:20 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
DashApple
December 14, 2018, 10:21:25 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 14, 2018, 08:38:52 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Uspring
December 13, 2018, 12:23:30 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 12, 2018, 11:57:02 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 12, 2018, 01:15:30 PM
post Re: DRSSTC design guide - progress report
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 12, 2018, 01:00:34 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 12, 2018, 11:45:08 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 11, 2018, 09:13:49 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 11, 2018, 12:03:54 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 10, 2018, 12:25:15 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 10, 2018, 11:13:38 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
December 10, 2018, 09:18:24 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Mads Barnkob
December 10, 2018, 09:13:37 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 10, 2018, 02:18:59 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
sjsimmo
December 09, 2018, 11:09:34 PM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Fumeaux
December 09, 2018, 10:23:38 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 09, 2018, 06:05:02 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Jesjes
December 09, 2018, 04:50:56 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Laci
December 08, 2018, 12:52:41 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
December 08, 2018, 09:51:47 AM
post Huawei RRU3928 1800MHz radio base station teardown (part 1 of 2)
[Radio frequency]
Mads Barnkob
December 06, 2018, 07:49:06 PM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Fumeaux
December 03, 2018, 10:35:13 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
sjsimmo
December 03, 2018, 08:40:43 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Jesjes
December 03, 2018, 05:31:29 AM
post Re: Hacking the IKEA 2000 Watt induction stove (5 parts)
[Electronic circuits]
chjarup
December 02, 2018, 11:44:14 PM
post SSTC-Driver PCB 1.3
[Printed Circuit Board]
Fumeaux
December 02, 2018, 10:25:23 PM
post Re: Hacking the IKEA 2000 Watt induction stove (5 parts)
[Electronic circuits]
Mads Barnkob
December 02, 2018, 04:23:16 PM
post Re: Hacking the IKEA 2000 Watt induction stove (5 parts)
[Electronic circuits]
chjarup
December 02, 2018, 12:12:57 PM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Mads Barnkob
December 02, 2018, 09:57:04 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Fumeaux
December 01, 2018, 09:15:01 PM
post First SSTC build, need help troubleshooting
[Solid state Tesla coils]
Jesjes
December 01, 2018, 03:38:37 AM
post Re: How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Laci
November 29, 2018, 08:34:50 PM
post Re: How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Netzpfuscher
November 29, 2018, 09:18:47 AM
post Re: My X-Ray Machine
[X-ray]
neukyhm
November 28, 2018, 07:33:44 PM
post Re: My X-Ray Machine
[X-ray]
Mads Barnkob
November 28, 2018, 07:14:52 PM
post My X-Ray Machine
[X-ray]
neukyhm
November 28, 2018, 04:42:32 PM
post Re: How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
November 28, 2018, 09:55:58 AM
post How sensitive are Tesla coils to Arduino boards?
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Laci
November 27, 2018, 08:50:54 PM
post Re: My First SSTC
[Solid state Tesla coils]
sjsimmo
November 27, 2018, 09:56:16 AM
post Re: My First SSTC
[Solid state Tesla coils]
Mads Barnkob
November 27, 2018, 08:53:35 AM
post Re: My First SSTC
[Solid state Tesla coils]
sjsimmo
November 26, 2018, 02:28:22 AM
post Re: My First SSTC
[Solid state Tesla coils]
pentode
November 23, 2018, 11:18:58 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
November 23, 2018, 06:39:47 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
November 23, 2018, 03:48:47 AM
post Re: Nokia Siemens Flexi BTS base station teardown: Power amplifier (part 1 and 2)
[Radio frequency]
Mads Barnkob
November 22, 2018, 10:03:48 PM
post Re: Usable vacuum tube?
[Vacuum tube Tesla coils]
Mads Barnkob
November 22, 2018, 11:36:49 AM
post Re: Usable vacuum tube?
[Vacuum tube Tesla coils]
sjsimmo
November 22, 2018, 01:17:32 AM
post My First SSTC
[Solid state Tesla coils]
sjsimmo
November 21, 2018, 11:43:46 PM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
November 20, 2018, 11:12:10 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30