Author Topic: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers  (Read 874 times)

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 186
  • Karma: +6/-0
    • View Profile
DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« on: May 15, 2018, 03:30:24 AM »
Hello,

I am releasing the DRSSTC PCB pack.  This includes the UD2.9 skip pulse gerbers, as well as PCBs for interrupters and bridge boards.  These boards are all less than 10 by 10 cm and so can be made for $5 from many PCB houses (not including shipping).  If you get many boards made at once, you can spread the cost of the shipping over these boards.

Boards included:

1)   UD2.9 skip pulse
2)   UD2.7 conventional board (without skip pulse)
3)   UD3.1 that uses the PSoC5 CYC8KIT
4)   Half Bridge with 2 transistors and a place for a capacitive divider for the other side of the bridge, and a place for RC snubbers on each transistor
5)   Half Bridge with 8 transistors (4 on each LO/HI side)
6)   Full bridge with 4 transistors and a place for RC snubbers on each transistor
7)   Full Bridge with 8 transistors (2 on each LO/HI side, two half bridges)
8)   Burst interrupter with external triggering
9)   AC line interrupter, includes a spot for the ATTINY85 to implement the OneTesla tiny USB interrupter.

These are all made with kicad, so you can modify them as you need to (kicad is open source software).

Dan

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 231
  • Karma: +3/-0
    • View Profile
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #1 on: May 15, 2018, 10:17:22 AM »
Thank you for the massive contribution. looking forward to see what coils people (myself included) will build with this release. 

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 851
  • Karma: +7/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #2 on: May 15, 2018, 02:06:30 PM »
Thank you Dan!

I envy the amount of work you can get done in little time :)

I will share this on my facebook page for kaizer power electronics.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 186
  • Karma: +6/-0
    • View Profile
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #3 on: May 19, 2018, 12:32:25 AM »
Hello,

I made a small change to the PCB pack.  The burst interrupter now includes the MIDI USB interrupter as well, for those who don't want to have to try my experimental interrupter to get the MIDI USB capability.  Of course, you don't have to add the chip to the board if you don't want it.  If you get a AVR ISP you can plug it into the interrupter board and program the ATTINY85 chip and have a combination burst/standard/audio triggered/MIDI interrupter that should be good for all kinds of stuff.

The revised DRSSTC PCB pack is attached.

Dan

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 186
  • Karma: +6/-0
    • View Profile
Corrected versions of DRSSTC pcb pack
« Reply #4 on: June 01, 2018, 04:24:46 PM »
Hello,

I have a new version of the PCB pack with some minor fixes.

1.   I built the UD3 driver, but I found that some of the components get in the way of plugging the USB into the target board, so I moved around some of the components to allow for better access to the usb connector.

2.  I built the line interrupter.   It works, but I had to tweak a couple of component values.  It is possible that interrupting on the AC could cause a lot of noise for other devices on the circuit.  However, it does seem that it allows for more power to be drawn, perhaps indicating a better power factor.  This requires more study.

3.  The two interrupters contain a USB MIDI interrupter on them that may be optionally populated if you want a combined test/sound/MIDI interrupter.  I have included the compiled project so that the ATTINY85 microcontroller can be programmed, including source code because the code is open source.  It required a few tweaks and updates to work on more modern versions of avr-gcc, which is one reason why I included it.  The fuse bits on the ATTINY85 have to be set as given in the flashing.txt file, and then you can program the microcontroller, both using avrdude.

Dan

High Voltage Forum

Corrected versions of DRSSTC pcb pack
« Reply #4 on: June 01, 2018, 04:24:46 PM »

 


* Recent Topics and Posts

post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
Today at 11:07:22 AM
post Re: My First DRSSTC
[Dual Resonant Solid State Tesla coils]
sjsimmo
Today at 08:08:58 AM
post Re: How to calculate VA rating and other things for Ferrite Core? (SMPS)
[Transformer (ferrite core)]
sjsimmo
Today at 01:24:15 AM
post How to calculate VA rating and other things for Ferrite Core? (SMPS)
[Transformer (ferrite core)]
FilipŠebík
January 18, 2019, 07:32:38 PM
post Re: How to design a 7.5kV AC source?
[Transformer (ferrite core)]
profdc9
January 18, 2019, 04:25:14 PM
post How to design a 7.5kV AC source?
[Transformer (ferrite core)]
CristianM
January 18, 2019, 03:48:06 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
the_anomaly
January 17, 2019, 02:01:36 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 16, 2019, 04:26:38 AM
post AC vs DC fuses, high current, explosive destructive testing and theory
[Capacitor banks]
Mads Barnkob
January 15, 2019, 09:48:48 PM
post Re: My X-Ray Machine
[X-ray]
neukyhm
January 15, 2019, 10:51:46 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 14, 2019, 05:08:38 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
the_anomaly
January 14, 2019, 01:15:53 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
January 14, 2019, 12:22:07 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 11, 2019, 05:10:39 AM
post Re: My X-Ray Machine
[X-ray]
Max
January 10, 2019, 10:59:25 PM
post Re: 迎词、来
[General chatting]
profdc9
January 10, 2019, 06:56:59 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 10, 2019, 05:33:48 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
black.yang
January 10, 2019, 02:11:58 AM
post Re: My X-Ray Machine
[X-ray]
Mads Barnkob
January 09, 2019, 09:14:59 PM
post Acoustic spectra of sung vowels by the FFT analyzer HP 3561A
[Electronic circuits]
Physikfan
January 08, 2019, 08:44:16 PM
post Re: IGBT failure in DRSSTC
[Dual Resonant Solid State Tesla coils]
Felix Bieri
January 08, 2019, 05:33:55 PM
post Re: Huawei RRU3928 1800MHz radio base station teardown (part 1 of 2)
[Radio frequency]
Mads Barnkob
January 08, 2019, 08:25:08 AM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
flyglas
January 08, 2019, 08:25:02 AM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
Hydron
January 08, 2019, 02:01:50 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Hydron
January 07, 2019, 10:23:38 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 07, 2019, 08:53:32 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 07, 2019, 08:17:44 PM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
January 07, 2019, 07:37:53 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Uspring
January 07, 2019, 01:30:36 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 07, 2019, 12:43:26 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Hydron
January 07, 2019, 08:09:49 AM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
NEYi
January 07, 2019, 07:43:50 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
January 07, 2019, 06:48:06 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
January 07, 2019, 06:39:56 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 06, 2019, 09:23:19 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 06, 2019, 07:11:25 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Uspring
January 06, 2019, 07:02:14 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
flyglas
January 06, 2019, 12:43:46 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 06, 2019, 11:55:09 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
TDAF
January 06, 2019, 09:48:06 AM
post Re: First SSTC build, need help troubleshooting
[Solid state Tesla coils]
TDAF
January 06, 2019, 09:45:17 AM
post 关于: 这个便宜的 drsstc 驱动程序从 aliexpress 1.3 b 类型?
[Dual Resonant Solid State Tesla coils]
black.yang
January 06, 2019, 08:34:46 AM
post 迎词、来
[General chatting]
black.yang
January 06, 2019, 08:20:21 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
flyrod
January 06, 2019, 12:34:15 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
January 05, 2019, 05:27:23 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
flyrod
January 05, 2019, 03:46:29 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 05, 2019, 09:51:10 AM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
January 04, 2019, 11:02:25 PM
post Re: (DR)SSTC II
[Dual Resonant Solid State Tesla coils]
Laci
January 03, 2019, 08:38:15 PM
post Re: SimpleDriver v2.3, my phase-shifting QCW DRSSTC controller
[Dual Resonant Solid State Tesla coils]
flyglas
January 03, 2019, 08:15:48 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30