Author Topic: Looking for a good ZVS circuit  (Read 910 times)

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Looking for a good ZVS circuit
« on: July 28, 2024, 07:10:41 PM »
I require a ZVS circuit to use as a transformer driver, up to 1800W (60V 30A max).

I'd saved the attached schematics; it was from prominent members here, but I cannot remember where specifically they were saved from.

I realise I can buy one from Aliexpress, but I'd like a good base to play with and modify. What would be the most suitable circuit to fulfil this need? What changed could be made to achieve say 60V input - 20kHz output? Preferably something that'd work over a good voltage range.

I did try to make this one https://www.schematix.co.nz/forum/how-to-s/1-4kw-induction-heater but I failed, both MOSFETS just lock on and i have no idea why.

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #1 on: July 28, 2024, 07:19:24 PM »
This is the failed one, the capacitors are mounted underneath. I used terminal blocks so I could swap out MOSFETS, inductors and capacitorsm while this isn't ideal it shouldn't affect its function to that extent, should it?

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2953
  • Karma: +138/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #2 on: July 29, 2024, 02:14:00 AM »
Quote
I'd saved the attached schematics; it was from prominent members here, but I cannot remember where specifically they were saved from.
That's one of my older ZVS oscillator versions.  Keeps gate pull-up resistor power dissipation low, but does not solve the startup issue that most ZVS oscillator (Mazzilli oscillator) circuits have.  Standard "solution" is to apply DC power rapidly, as in a DC switch on power supply output.  I have other past posts where I thought I'd solved that startup issue, but was just having luck, not a true reliable solution.

The one reliable (at least so far for multiple users) solution is to apply gate power prior to applying voltage to power inductors feeding output.  That way neither supply needs to ramp up quickly.

Other solution I've used is to turn on main inductor power first, then switch on gate power rapidly.  I use this method for switching on and off using logic control.  Not a universal solution, but works in at least some cases.

BTW, I have one other solution that I haven't tested yet.  That's to use depletion-mode FETs for feedback instead of diodes.

Quote
This is the failed one, the capacitors are mounted underneath. I used terminal blocks so I could swap out MOSFETS, inductors and capacitorsm while this isn't ideal it shouldn't affect its function to that extent, should it?
Image shows 9V and 14V on FET source leads.  Sources are connected to 0V.  Implies ECB and/or FET connector blocks are damaged.
« Last Edit: July 29, 2024, 02:15:47 AM by davekni »
David Knierim

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #3 on: July 29, 2024, 11:31:16 AM »
I had two of them made via PCBWay, but they both have the same fault, just locks on 24V at both outputs. Circuit picture and schematic pdf is attached. The other is a bit more even at the MOSFETS (G/D/S - 12V/24V/10V) on both sides, but acts the same.

Yeh I have a 3 premade Aliexpress ZVS and they all have the problem of one side locking on if it's not switched via a mechanical jolt. The other attachments are ways I was looking to prevent that.

Offline petespaco

  • High Voltage Engineer
  • ****
  • Posts: 282
  • Karma: +12/-0
    • View Profile
    • French Creek Valley Activities
Re: Looking for a good ZVS circuit
« Reply #4 on: July 29, 2024, 11:47:55 PM »
Quote
Yeh I have a 3 premade Aliexpress ZVS and they all have the problem of one side locking on if it's not switched via a mechanical jolt.

What are you using for a power supply?  I don't know anything about the circuits in your first post, but I do know that you will need a power supply that can deliver at least 25 amperes or more for the 1000 watt "premade Aliexpress ZVS" that use 2 IRFP260N Mosfets.
Like this one:
https://www.aliexpress.us/item/2251832672195220.html

Also, make sure that your power supply is not set for current limiting below its max. capability.  If the power supply voltage drops much below about 12 volts, you will have problems.

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2953
  • Karma: +138/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #5 on: July 31, 2024, 05:16:19 AM »
Your circuit diagram clearly shows FET sources connected to ground (0V).  Your ECB must have an issue such as missing ground plane connections.

U1 regulator is likely too low current to power 100 ohm gate pull-up resistors.

FETs are obsolete 900V parts.  Not likely to work for this simple ZVS oscillator circuit due to high on resistance and likely high gate capacitance.

Not familiar with your PFET part either.  Can it handle sufficient current?  Can it handle high power dissipation during slow turn-on of your circuit?
David Knierim

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #6 on: July 31, 2024, 09:42:47 PM »
Petespaco, the Aliexpress ZVS modules available all work perfectly well, running off a 48V battery through a 0-48V 24A buck converter. I just require a good "base circuit" to modify and play with.

Dave sorry for the confusion but that circuit isn't mine, rather it's just one that I'd saved for inspiration. I'm not sure if this circuit is a made circuit or just a proposed one.

 I guess IXTH140P10T/IXFH140N10T and the 2 x IRFP4668PBF would be suitable FET replacements.

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2953
  • Karma: +138/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #7 on: August 01, 2024, 03:32:28 AM »
Quote
Dave sorry for the confusion but that circuit isn't mine, rather it's just one that I'd saved for inspiration. I'm not sure if this circuit is a made circuit or just a proposed one.
No confusion.  You made it clear that you'd copied it from some previous post.
Yes, it is one I've made.  Does work and drastically reduces gate pull-up resistor power.  However, still requires rapid application of supply voltage as with simpler ZVS circuits.
David Knierim

Offline radbloke

  • High Voltage Enthusiast
  • *
  • Posts: 19
  • Karma: +3/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #8 on: August 01, 2024, 05:35:49 AM »
I made a ZVS which I’m directly driving the primary coil of a DRSSTC at resonance. Using 1/2 wave rectified mains, we get great ramped output. I have worked on this with Jerry Miller of ArcAngel Tesla Coil fame and we have put together a PCB for which I can give you a link to the Gerber files. The PCB has been tested and works great. The primary resonance starts when 12V gate voltage is applied. Then the ramps start when mains is added via a variac. Here is a link:
https://teslascience.wordpress.com/cw-tesla-coil-running-directly-off-a-zvs-driver/

« Last Edit: August 01, 2024, 05:38:46 AM by radbloke »

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2953
  • Karma: +138/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #9 on: August 01, 2024, 07:13:35 PM »
Quote
I made a ZVS which I’m directly driving the primary coil of a DRSSTC at resonance. Using 1/2 wave rectified mains, we get great ramped output. I have worked on this with Jerry Miller of ArcAngel Tesla Coil fame and we have put together a PCB for which I can give you a link to the Gerber files. The PCB has been tested and works great. The primary resonance starts when 12V gate voltage is applied. Then the ramps start when mains is added via a variac.
Key point relevant for this topic is last two sentences above.  Applying gate power before main power is a reliable way to get these ZVS oscillator circuits to start oscillating.

radbloke:  Your coil would be good as its own topic under DRSSTC category.  I have other thoughts and questions, but don't want to clutter up this thread with an unrelated project.
David Knierim

Offline AstRii

  • High Voltage Engineer
  • ****
  • Posts: 278
  • Karma: +9/-0
  • Czech Technical University in Prague
    • View Profile
    • UHVlab - Tesla Coils | High Voltage | Education
Re: Looking for a good ZVS circuit
« Reply #10 on: August 01, 2024, 09:54:54 PM »
U1 regulator is likely too low current to power 100 ohm gate pull-up resistors.

Just to clarify, the circuit shown on the schematic is mine first try at high power ZVS driver. https://www.uhvlab.org/zvs-driver

The U1 regulator was sufficient to power the Gates, but from what I remember the circuit was running pretty low frequency of ~50kHz. These TO-220 package linear regulators can deliver plenty of current, but need to be cooled well. For Vcc>30V, I had to replace the LM317 with discrete regulator made with a TO-247 package transistor on a big heatsink.

FETs are obsolete 900V parts.  Not likely to work for this simple ZVS oscillator circuit due to high on resistance and likely high gate capacitance.

Indeed, I was working with what I had laying around, at input current of over 40A the circuit was latching up and didn't work.

Not familiar with your PFET part either.  Can it handle sufficient current?  Can it handle high power dissipation during slow turn-on of your circuit?

For input currents of 20-40A I ended up using 4 of those in parallel on a heatsink.

I need to find some time to put all of this information to the website..

Beside all of this, the circuit has never failed me to start-up reliably at various loads and input voltages.
« Last Edit: August 01, 2024, 09:57:25 PM by AstRii »
Bc. Marek Novotny
Czech Republic, Czech Technical University in Prague
www.uhvlab.org

High Voltage Forum

Re: Looking for a good ZVS circuit
« Reply #10 on: August 01, 2024, 09:54:54 PM »

 


* Recent Topics and Posts

post Powering fluorescent lamps with Tesla coils
[Spark Gap Tesla Coils (SGTC)]
MechatEng2023
Today at 07:11:14 AM
post Re: High pressure sodium lamp phosphorescence
[Light, Lasers and Optics]
MechatEng2023
Today at 07:05:14 AM
post Re: Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 04:24:59 AM
post Re: Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PATWORK007
Today at 03:39:31 AM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
Today at 02:24:08 AM
post Re: Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:20:15 AM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:14:27 AM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 13, 2024, 11:21:59 PM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
October 13, 2024, 10:41:48 PM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
October 13, 2024, 08:54:14 PM
post FEEDBACK IH WORKING GREAT- HIGH POWER TEST RUN
[Induction Launchers, Coil Guns and Rails guns]
radbloke
October 13, 2024, 08:14:41 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 13, 2024, 07:03:05 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
Bert911
October 13, 2024, 02:29:31 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 13, 2024, 04:17:58 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 13, 2024, 01:40:19 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
buchtawill
October 12, 2024, 07:04:03 PM
post Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PATWORK007
October 12, 2024, 10:09:14 AM
post Re: Tested and working feedback induction heater driver with current limiter
[Induction Launchers, Coil Guns and Rails guns]
radbloke
October 12, 2024, 05:45:55 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 11, 2024, 06:37:44 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 11, 2024, 05:13:41 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 11, 2024, 04:50:45 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 11, 2024, 04:43:06 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 11, 2024, 03:06:59 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 11, 2024, 10:56:03 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 11, 2024, 05:54:38 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 10, 2024, 08:46:26 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 10, 2024, 07:19:54 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 10, 2024, 03:29:45 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 10, 2024, 11:27:43 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 10, 2024, 11:09:29 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 10, 2024, 11:01:26 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 10, 2024, 05:55:50 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 09, 2024, 10:32:30 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 09, 2024, 05:44:25 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 08, 2024, 09:35:59 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 08, 2024, 09:33:40 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 08, 2024, 09:10:38 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 08, 2024, 08:48:43 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 08, 2024, 08:22:07 PM
post Re: Last cap in CW always blowing up
[Voltage Multipliers]
JoeBusic
October 08, 2024, 02:36:07 PM
post Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 08, 2024, 07:46:14 AM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 08, 2024, 02:46:32 AM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 07, 2024, 07:13:58 PM
post Re: Shock box
[Electronic Circuits]
haversin
October 07, 2024, 05:45:41 PM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
October 07, 2024, 05:32:31 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 07, 2024, 04:01:51 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 07, 2024, 03:59:27 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
Late
October 07, 2024, 03:56:11 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 02:58:03 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 07, 2024, 02:09:29 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 07, 2024, 02:05:07 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Uspring
October 07, 2024, 01:51:38 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
October 07, 2024, 11:39:50 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 09:20:11 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 09:03:59 AM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 08:52:23 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 06, 2024, 07:26:46 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 06, 2024, 07:17:56 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 06, 2024, 07:04:24 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 06, 2024, 06:56:45 PM
post Has anyone done a teardown of one of these "Induction Heaters for Auto Use"?
[Electronic Circuits]
petespaco
October 06, 2024, 04:53:46 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
Late
October 06, 2024, 04:23:47 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 06, 2024, 04:17:48 PM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
October 06, 2024, 02:59:35 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Uspring
October 06, 2024, 01:18:16 PM
post Re: Last cap in CW always blowing up
[Voltage Multipliers]
JoeBusic
October 05, 2024, 10:56:17 PM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 09:42:27 PM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 05, 2024, 09:35:43 PM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
October 05, 2024, 08:50:55 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 07:59:15 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 05, 2024, 05:35:00 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 05, 2024, 05:24:59 PM
post Crystal HFSSTC
[Solid State Tesla Coils (SSTC)]
Perolodzilla
October 05, 2024, 01:16:19 PM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 05, 2024, 09:14:48 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 06:45:42 AM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
October 05, 2024, 06:20:55 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 06:13:35 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 05:53:22 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 05, 2024, 04:19:17 AM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
October 05, 2024, 12:15:59 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Continuum
October 04, 2024, 11:12:20 PM
post current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
October 04, 2024, 10:25:43 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 04, 2024, 07:15:58 PM
post Re: Shock box
[Electronic Circuits]
alan sailer
October 04, 2024, 02:58:01 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Continuum
October 04, 2024, 01:27:07 AM
post Re: Shock box
[Electronic Circuits]
haversin
October 04, 2024, 01:03:02 AM
post Re: Shock box
[Electronic Circuits]
alan sailer
October 04, 2024, 12:44:17 AM
post Shock box
[Electronic Circuits]
haversin
October 04, 2024, 12:21:09 AM
post Re: Bertran Model 205A-03R High Voltage Power Supply
[General Chat]
klugesmith
October 03, 2024, 07:38:36 AM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
haversin
October 03, 2024, 12:45:51 AM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
klugesmith
October 03, 2024, 12:15:29 AM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
haversin
October 02, 2024, 10:49:03 PM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
klugesmith
October 02, 2024, 06:27:22 PM
post On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 02, 2024, 05:41:09 PM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
October 02, 2024, 05:23:18 PM
post Re: Tested and working feedback induction heater driver with current limiter
[Induction Launchers, Coil Guns and Rails guns]
radbloke
October 02, 2024, 05:57:37 AM
post Re: Tested and working feedback induction heater driver with current limiter
[Induction Launchers, Coil Guns and Rails guns]
davekni
October 02, 2024, 05:00:12 AM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 02, 2024, 03:01:15 AM
post MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
October 01, 2024, 10:22:59 PM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
haversin
October 01, 2024, 06:04:57 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal