Author Topic: Weller PU81 station mod for DSX80 desoldering handle  (Read 2346 times)

Offline futurist

  • Global Moderator
  • High Voltage Technician
  • *****
  • Posts: 116
  • Karma: +0/-0
    • View Profile
Weller PU81 station mod for DSX80 desoldering handle
« on: April 04, 2018, 03:54:12 PM »
Just to quickly share my latest project

I have Weller PU81 soldering station and after watching video on Marco Reps's channel I decided to buy DSX80 desoldering handle. It's completely compatible with my station, heating control works out of the box, and the only thing needed to get it running is to add a vacuum pump. I decided to try small 12V vacuum pump https://www.ebay.com/itm/DC-Electric-12V-Micro-Vacuum-Air-Pump-Booster-For-Medical-Treatment-Instrument/282489988597 which is just 3$ delivered, and could even fit in the station.

For pump speed control and 24V to 12V regulation I decided to make a small 50x50 mm PCB with 555 PWM and LM2596 DC-DC converter





BOM, gerbers, KiCad project of the module are free to use
* buck_pwm_module.zip

Next problem is how to use internal switch to power the pump


There is no way to use the switch directly. Hydron proposed neat solution using AC relay connected to one of the terminals of the transformer and pin 7 on DIN connector (pin 6 on official Weller pinout)

24 VAC relay


Wires for the relay


Biggest part of the job was to fit everything inside existing station enclosure because free space is very limited. Friend helped with drawing models for mounts for the AC relay, PCB and vacuum pump



PCB


Vacuum pump mount


Before soldering


.stl files for 3D printed mounts
* mount.zip


Hope someone finds it useful
« Last Edit: April 04, 2018, 04:03:43 PM by futurist »

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 264
  • Karma: +6/-0
    • View Profile
Re: Weller PU81 station mod for DSX80 desoldering handle
« Reply #1 on: April 05, 2018, 07:21:06 AM »
I didn't even know desoldering stations existed! How does it perform compared to a spring loaded solder sucker?

Offline futurist

  • Global Moderator
  • High Voltage Technician
  • *****
  • Posts: 116
  • Karma: +0/-0
    • View Profile
Re: Weller PU81 station mod for DSX80 desoldering handle
« Reply #2 on: April 05, 2018, 06:43:48 PM »
It's not magic bullet but because the entire tip is heated it's much better than hand held vacuum pumps
Downside is cost, complete Weller WDD 81V desoldering station which needs compressed air to operate is 790 €, and just the handle is ~250 €. I got lucky on eBay and bought new handle for under 150€, which is still very expensive but since I won't be using it on a daily basis it should easily outlast me

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1071
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Weller PU81 station mod for DSX80 desoldering handle
« Reply #3 on: April 08, 2018, 10:06:18 PM »
Great project futurist! Rebuilding equipment to expand the features a lower cost is the essence of what we do :)

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline futurist

  • Global Moderator
  • High Voltage Technician
  • *****
  • Posts: 116
  • Karma: +0/-0
    • View Profile
Re: Weller PU81 station mod for DSX80 desoldering handle
« Reply #4 on: April 25, 2018, 05:39:49 PM »
Thanks Mads! :)

Short update on the project
Today I made a simple hose adapter which replaces key plug on the soldering station and allows the DSX80 handle to be connected externally
So far everything works nicely and the small vacuum pump doesn't have any problem sucking the solder. I added fuel filter before the pump to prevent any flux vapor from entering the pump

.stl file of the hose adapter
* hose_adapter.zip
« Last Edit: April 25, 2018, 05:43:56 PM by futurist »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1071
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Weller PU81 station mod for DSX80 desoldering handle
« Reply #5 on: May 08, 2018, 01:07:40 PM »
That is a clever use of a existing product, the gasoline filter, instead of trying to come up with a complete new solution. Its cheap, common and easy to replace :)

Still working good some 2 weeks into use?
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Weller PU81 station mod for DSX80 desoldering handle
« Reply #5 on: May 08, 2018, 01:07:40 PM »

 


* Recent Topics and Posts

post Re: adventures in homemade flyback bobbins.
[Transformer (ferrite core)]
ElectroXa
Today at 02:22:09 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 19, 2019, 09:08:12 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
August 19, 2019, 02:27:06 PM
post Flashing light prize 2019
[Electronic circuits]
Avalanche
August 19, 2019, 02:12:41 PM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Hydron
August 19, 2019, 10:44:35 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
August 19, 2019, 07:37:07 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 19, 2019, 03:29:24 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 18, 2019, 05:05:24 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
August 18, 2019, 01:04:35 PM
post Re: You would think this would be easy to find.
[Spark gap Tesla coils]
thedoc298
August 17, 2019, 11:09:16 PM
post Re: You would think this would be easy to find.
[Spark gap Tesla coils]
thedoc298
August 17, 2019, 11:00:32 PM
post Re: You would think this would be easy to find.
[Spark gap Tesla coils]
Fumeaux
August 17, 2019, 09:44:07 PM
post You would think this would be easy to find.
[Spark gap Tesla coils]
thedoc298
August 17, 2019, 09:01:00 PM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 17, 2019, 08:06:42 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 17, 2019, 10:45:26 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 17, 2019, 06:21:45 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
August 17, 2019, 12:59:20 AM
post Re: Twin System Build
[Dual Resonant Solid State Tesla coils]
fnordest
August 17, 2019, 12:18:48 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:34:46 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
Mads Barnkob
August 16, 2019, 10:26:19 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
August 16, 2019, 10:19:18 PM
post Re: [Development] Project of an SSTC driver.
[Solid state Tesla coils]
Mads Barnkob
August 16, 2019, 10:07:31 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
T3sl4co1l
August 16, 2019, 09:28:35 PM
post Re: Suitable capacitors and switches? 10kV
[Capacitor banks]
ElectroXa
August 16, 2019, 09:17:04 PM
post Re: ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
T3sl4co1l
August 16, 2019, 09:14:36 PM
post ESAB Power TIG 200 Welder Teardown
[Electronic circuits]
Mads Barnkob
August 16, 2019, 08:03:18 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 16, 2019, 01:49:53 PM
post Suitable capacitors and switches? 10kV
[Capacitor banks]
MrFox
August 16, 2019, 12:21:36 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 16, 2019, 11:22:45 AM
post Re: Small Phase change build R600a
[General chatting]
DashApple
August 15, 2019, 06:23:40 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
rikkitikkitavi
August 15, 2019, 06:17:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Lane
August 15, 2019, 01:51:04 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
August 14, 2019, 07:05:57 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
August 14, 2019, 03:42:34 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 02:56:49 PM
post Re: Van de Graaf is leaking charge
[Static electricity]
ElectroXa
August 14, 2019, 01:42:21 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 14, 2019, 12:53:10 PM
post Van de Graaf is leaking charge
[Static electricity]
Patric
August 14, 2019, 09:22:21 AM
post Re: Drsstc 3
[Dual Resonant Solid State Tesla coils]
oneKone
August 14, 2019, 04:39:11 AM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 13, 2019, 07:10:31 PM
post Re: MMC orientation and variac
[Spark gap Tesla coils]
MRMILSTAR
August 13, 2019, 05:17:23 AM
post MMC orientation and variac
[Spark gap Tesla coils]
thedoc298
August 12, 2019, 09:54:35 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
August 12, 2019, 08:40:16 PM
post Re: Small Phase change build R600a
[General chatting]
Hydron
August 12, 2019, 07:27:23 PM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
klugesmith
August 12, 2019, 09:18:15 AM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
shrad
August 12, 2019, 09:06:34 AM
post Re: Teardown of Danfoss VLT6000 4kW Variable Frequency Drive
[Electronic circuits]
klugesmith
August 12, 2019, 09:02:38 AM
post Re: A problem solved with hand tools
[General chatting]
klugesmith
August 12, 2019, 08:29:20 AM
post Re: Ebay [US]: MITSUBISHI CM300 1200V-300A IGBT (30$ a piece)
[Sell / Buy / Trade]
oneKone
August 12, 2019, 05:25:24 AM
post Re: Ebay [US]: MITSUBISHI CM300 1200V-300A IGBT (30$ a piece)
[Sell / Buy / Trade]
acobaugh
August 10, 2019, 08:14:35 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30