Author Topic: Ideas needed!  (Read 2356 times)

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 314
  • Karma: +8/-0
    • View Profile
Ideas needed!
« on: February 25, 2018, 07:31:40 AM »
hi,

i recently picked up a decommissioned mig welder from a mate. he said for some reason the case and handle was missing but the internals are all still good. so it got me thinking.... what could i use these cores for? i'm thinking as an inductor for a boost converter?  being a mig welder it would just be a big step down transformer with most likely a 12-40v output at 80 amps. 


Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 316
  • Karma: +11/-0
    • View Profile
Re: Ideas needed!
« Reply #1 on: February 25, 2018, 11:18:59 AM »
From the picture those cores look like laminated steel. If they are designed for 50/60Hz then you won't be able to run them at the higher frequencies used in a switchmode (e.g. buck or boost) converter without huge losses in the cores.
Someone might have other suggestions for use though.

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Ideas needed!
« Reply #2 on: February 25, 2018, 12:52:14 PM »
Well that's what he said. Works ok till only 400hz if I remember. Why not use it as a mig welder? ::)

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 314
  • Karma: +8/-0
    • View Profile
Re: Ideas needed!
« Reply #3 on: February 26, 2018, 12:32:38 AM »
@Hydron
I didn't even think about that. I just saw a big core and got excited!

@AndreiRS
I don't think I could justify the parts cost to get it running again, as well as I have a few other welders.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1401
  • Karma: +23/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Ideas needed!
« Reply #4 on: February 26, 2018, 08:35:10 PM »
As you sit with 50 Hz parts it is hard to really reinvent it outside its original purpose.

One useful purpose, if you do not want a old welder, could be a spot welder for building prototype enclosure.

I actually also googled and found this from a welder manufacturer: https://www.everlastgenerators.com/blog/top-10-things-do-old-welder
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 314
  • Karma: +8/-0
    • View Profile
Re: Ideas needed!
« Reply #5 on: February 27, 2018, 01:59:01 AM »
Haha mads... I think I could use number 5 as an option! I think I'll see how much current the transformation draws when connected to mains, if it's not a lot I might just use it as a power supply if I get into high power zvs drivers

Offline kamelryttarn

  • High Voltage Technician
  • ***
  • Posts: 125
  • Karma: +0/-0
    • View Profile
Re: Ideas needed!
« Reply #6 on: February 27, 2018, 09:48:28 AM »
Why not just convert it to a high current PSU? They can be very useful for driving induction circuits among other things. If it's a three phase transformer you would get a pretty low ripple voltage.

Offline MRMILSTAR

  • High Voltage Technician
  • ***
  • Posts: 195
  • Karma: +4/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Ideas needed!
« Reply #7 on: June 20, 2019, 05:13:57 PM »
You might be able to use it as a ballast for a SGTC HV transformer.
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

High Voltage Forum

Re: Ideas needed!
« Reply #7 on: June 20, 2019, 05:13:57 PM »

 


* Recent Topics and Posts

post Linear Guide and Ball Screw
[General Chat]
Patrick
Today at 08:14:58 AM
post Re: Reverse engineering a big old American smoke detector
[Radioactive Sources]
klugesmith
Today at 06:30:09 AM
post Re: Datasheet Question
[Electronic Circuits]
Mads Barnkob
June 03, 2020, 08:01:53 PM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
June 03, 2020, 03:04:11 PM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
June 03, 2020, 02:54:04 PM
post Re: Site Info desperately needed: http://www.stevehv.4hv.org/
[General Chat]
Max
June 03, 2020, 02:27:26 PM
post Re: Site Info desperately needed: http://www.stevehv.4hv.org/
[General Chat]
Hydron
June 03, 2020, 02:19:32 PM
post Re: Site Info desperately needed: http://www.stevehv.4hv.org/
[General Chat]
Mads Barnkob
June 03, 2020, 02:10:57 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
arctichominid
June 03, 2020, 02:10:18 PM
post Re: New projet OmegaDR
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mugi30
June 03, 2020, 12:27:06 PM
post Datasheet Question
[Electronic Circuits]
ritaismyconscience
June 03, 2020, 08:10:27 AM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
June 03, 2020, 07:57:48 AM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 03, 2020, 07:01:44 AM
post Re: Site Info desperately needed: http://www.stevehv.4hv.org/
[General Chat]
John123
June 03, 2020, 01:01:25 AM
post Re: Proper Grounding in an Apartment
[Solid State Tesla Coils (SSTC)]
ritaismyconscience
June 03, 2020, 12:50:28 AM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
June 03, 2020, 12:35:11 AM
post Re: Proper Grounding in an Apartment
[Solid State Tesla Coils (SSTC)]
09d08
June 03, 2020, 12:22:31 AM
post Re: Proper Grounding in an Apartment
[Solid State Tesla Coils (SSTC)]
johnf
June 02, 2020, 09:25:51 PM
post Proper Grounding in an Apartment
[Solid State Tesla Coils (SSTC)]
09d08
June 02, 2020, 03:58:49 PM
post Re: 180kV ( 20cm ) Cockroft-Walton - ZVS Driver - RF Remote Control
[Voltage Multipliers]
davekni
June 02, 2020, 06:50:52 AM
post 180kV ( 20cm ) Cockroft-Walton - ZVS Driver - RF Remote Control
[Voltage Multipliers]
TheMaxii2007
June 02, 2020, 05:52:14 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
davekni
June 02, 2020, 04:53:24 AM
post Re: Reverse engineering a big old American smoke detector
[Radioactive Sources]
TheMaxii2007
June 02, 2020, 04:19:02 AM
post Re: Neon transformer
[Transformer (Iron Core)]
MRMILSTAR
June 01, 2020, 11:55:28 PM
post Re: Neon transformer
[Transformer (Iron Core)]
Mads Barnkob
June 01, 2020, 08:34:10 PM
post Re: Neon transformer
[Transformer (Iron Core)]
ritaismyconscience
June 01, 2020, 07:58:20 PM
post smallest iron core high voltage transformer ?
[Transformer (Iron Core)]
ElectroXa
June 01, 2020, 05:50:47 PM
post Re: Portable Q(uarantine)CW Tesla Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Uspring
June 01, 2020, 05:27:08 PM
post Neon transformer
[Transformer (Iron Core)]
Iyacht
June 01, 2020, 10:02:58 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
June 01, 2020, 03:38:05 AM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
June 01, 2020, 03:07:36 AM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
May 31, 2020, 11:59:47 PM
post Re: Servomex CO2 analyser
[Electronic Circuits]
erlendse
May 31, 2020, 11:05:19 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 11:03:45 PM
post Re: Please help me find a replacement (choke?)
[Beginners]
boxermick
May 31, 2020, 09:25:36 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
ritaismyconscience
May 31, 2020, 09:25:26 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 09:19:32 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
ritaismyconscience
May 31, 2020, 09:12:09 PM
post Re: CT performance investigations (Pearson and DIY)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
May 31, 2020, 09:10:39 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 09:00:46 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
ritaismyconscience
May 31, 2020, 08:57:42 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 08:50:17 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
ritaismyconscience
May 31, 2020, 08:40:02 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 08:32:03 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
ritaismyconscience
May 31, 2020, 08:20:07 PM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ritaismyconscience
May 31, 2020, 08:13:21 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 07:45:04 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
nix85
May 31, 2020, 07:42:19 PM
post Re: Russian voltage multiplicator stacking
[Voltage Multipliers]
davekni
May 31, 2020, 07:32:32 PM
post Re: Building a bigger DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 31, 2020, 07:23:35 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal