Author Topic: Hello everyone  (Read 2108 times)

Offline Max

  • High Voltage Enthusiast
  • *
  • Posts: 24
  • Karma: +2/-0
    • View Profile
Hello everyone
« on: March 08, 2017, 08:34:21 PM »
Hello!


First of all, I'm sorry for my english - I've only learned it for a few years and it wasn't my best subject... I'm from Luxembourg, doing my last year of high school and I'm very interested in electronics, especially anything with high power (like TCs, induction heating, ...). At the moment, in the few minutes of free time I have, I'm working on my DRSSTC (which you can see in an earlier stage here:
/>
I'm quite surprised, that this forum was created. Most of its founders (all?) are members of the 4hv forum which has almost the same topics - so why a second one?

Oh and I'd like to comment some points of Mads Barnkob website - should I post for every little comment in the respective subforum or just here in the general discussion forum? Also, which category would be the most suitable for induction heating related topics? It's not really high voltage but doesn't mach to any general electronic subforum either.
Edit: I also don't see a suitable forum for vacuum tube amplifiers, etc.


Kind regards,
Max
« Last Edit: March 08, 2017, 08:37:30 PM by Max »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1114
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Hello everyone
« Reply #1 on: March 08, 2017, 09:16:28 PM »
Hi Max

Welcome to the forum and do not worry about your English, it is very good :)

Great DRSSTC, I hope we will see a thread about that in great detail.

You are right about 4hv, most of us are users from there, 4hv suffers from old software and migration is close to a fully manual task for many years of data. This is not really a second high voltage forum, there are many other, mostly some in other languages, but still :) We wanted to serve a modern forum software to the high voltage community, now, and not first in years to come when it would be possible.

Please discuss each subject in their respective subforums, there will be minor restructuring in the following weeks. Use the General electronics for anything that isn't related to high voltage or other specific forums, I changed the description a bit to reflect this.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline futurist

  • Global Moderator
  • High Voltage Technician
  • *****
  • Posts: 116
  • Karma: +0/-0
    • View Profile
Re: Hello everyone
« Reply #2 on: March 09, 2017, 01:06:34 PM »
Welcome Max

Really nice DRSSTC, I hope you'll write more about it

Offline Max

  • High Voltage Enthusiast
  • *
  • Posts: 24
  • Karma: +2/-0
    • View Profile
Re: Hello everyone
« Reply #3 on: March 09, 2017, 03:17:30 PM »
Hello,


That are some good reasons for a new forum. Didn't think at thatf, since there was no announcement in the 4hv forum.
Of course there are other forums ;) But normally admins/mods of one forum don't create another one about the same subjects. So the "second" was from the point of view of the admins/mods.

I'll only start posting about my DRSSTC here once it's done, which will probably be in 3-4 months (after my exams). For those who really want to see pics and specs see here http://forum.mosfetkiller.de/viewtopic.php?f=32&t=62896 (interesting pics on pages 15, 17!, 22!)
Btw. one of those other great HV-forums out there!

Edit: Just encountered a strange bug in the reply editor (WYSIWYG mode). When the cursor is at the beginning of the line and I press backspace, the line doesn't only move to the end of the previous one as it should, but is also shrinked. And, possibly anoter bug, in the preview the [size] BBCode (generated due to the shrinking) is not considered. Oh, and I just wanted to attach some pics to show what I mean but somehow I'm to stupid for that. I select the file, it shows up below the select file field and then? If I hit the "(Insert Attachment1)" link, it adds "[ Attachment=1 ]" to my text but in the preview I see only  " [ Invalid attachment ] ". Maybe useful: I'm working with Chrome on Windows 8.1 x64.


Kind regards,
Max
« Last Edit: March 09, 2017, 05:02:28 PM by Max »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1114
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Hello everyone
« Reply #4 on: March 10, 2017, 09:23:32 PM »
Edit: Just encountered a strange bug in the reply editor (WYSIWYG mode). When the cursor is at the beginning of the line and I press backspace, the line doesn't only move to the end of the previous one as it should, but is also shrinked. And, possibly anoter bug, in the preview the [size] BBCode (generated due to the shrinking) is not considered. Oh, and I just wanted to attach some pics to show what I mean but somehow I'm to stupid for that. I select the file, it shows up below the select file field and then? If I hit the "(Insert Attachment1)" link, it adds "[ Attachment=1 ]" to my text but in the preview I see only  " [ Invalid attachment ] ". Maybe useful: I'm working with Chrome on Windows 8.1 x64.

I could not replicate the backspace/size tag error, in firefox

The attachment mod error, I did notice that there isn't a insert link for any, but the first attachment, you can however just write 2, 3 or 4 etc as it corresponds to the attachments, but this is not the intended functionality.

I contacted the mod developer about the error: http://www.simplemachines.org/community/index.php?topic=525705.600
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Avalanche

  • High Voltage Enthusiast
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Hello everyone
« Reply #5 on: March 14, 2017, 02:49:38 PM »
Hi all, I'm a long time 4hv member but I came here from Reddit so it was interesting seeing so many familiar usernames.

It's a shame about the 4hv software, I remember when it migrated to the software that it is running now back in 2005 - and that was a clean start from whatever it was running before that. I've been a lurker for the last few years, nothing much on at the moment.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1114
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Hello everyone
« Reply #6 on: March 15, 2017, 12:19:49 PM »
Hi all, I'm a long time 4hv member but I came here from Reddit so it was interesting seeing so many familiar usernames.

It's a shame about the 4hv software, I remember when it migrated to the software that it is running now back in 2005 - and that was a clean start from whatever it was running before that. I've been a lurker for the last few years, nothing much on at the moment.

Hi Avalanche, welcome.

4hv is still undergoing investigations to bring it into the future, I am also a part of a group that took up this work long ago, but things does not always move as fast as we wish for :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline radhoo

  • High Voltage Enthusiast
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Hello everyone
« Reply #7 on: March 28, 2017, 12:00:37 AM »
Ah, it is great to be here!  8)

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1114
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Hello everyone
« Reply #8 on: March 29, 2017, 09:51:53 AM »
Welcome radhoo :)

I am looking forward to see much more of your projects in the future, albeit I know how busy you are
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Hello everyone
« Reply #8 on: March 29, 2017, 09:51:53 AM »

 


* Recent Topics and Posts

post Re: CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
acobaugh
September 18, 2019, 07:27:46 PM
post Re: CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
acobaugh
September 18, 2019, 06:56:20 PM
post Re: CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
acobaugh
September 18, 2019, 05:08:06 PM
post Re: CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
September 18, 2019, 01:35:58 PM
post Re: CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
acobaugh
September 18, 2019, 05:54:23 AM
post Re: Blast from the past!
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
klugesmith
September 18, 2019, 05:05:55 AM
post Re: UD2.7 Gate Signals
[Dual Resonant Solid State Tesla coils]
coilinator
September 17, 2019, 08:24:59 PM
post Re: Blast from the past!
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
MRMILSTAR
September 17, 2019, 08:19:45 PM
post Re: Blast from the past!
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Mads Barnkob
September 17, 2019, 06:53:52 PM
post Blast from the past!
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
MRMILSTAR
September 17, 2019, 05:52:00 PM
post Re: CM300 coil build questions
[Dual Resonant Solid State Tesla coils]
acobaugh
September 17, 2019, 05:00:47 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
davekni
September 17, 2019, 06:48:38 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
September 16, 2019, 11:07:27 PM
post Re: 750W solar offgrid 24V/150Ah battery setup with Victron charger
[Electronic circuits]
johnf
September 16, 2019, 09:48:37 PM
post Re: adventures in homemade flyback bobbins.
[Transformer (ferrite core)]
AlexanderHun
September 16, 2019, 10:42:44 AM
post Re: Offgrid 48V solar to 24V battery setup
[Electronic circuits]
Mads Barnkob
September 16, 2019, 09:40:27 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
September 16, 2019, 09:28:43 AM
post Re: Large Ferrite Core with IGBT-Brick Driver
[Transformer (ferrite core)]
Mads Barnkob
September 16, 2019, 09:24:17 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
T3sl4co1l
September 16, 2019, 06:59:12 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
davekni
September 16, 2019, 04:18:26 AM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
davekni
September 16, 2019, 02:49:28 AM
post Re: Large Ferrite Core with IGBT-Brick Driver
[Transformer (ferrite core)]
davekni
September 16, 2019, 02:43:18 AM
post Re: Homemade HV transformer
[Transformer (ferrite core)]
davekni
September 16, 2019, 02:36:17 AM
post Re: adventures in homemade flyback bobbins.
[Transformer (ferrite core)]
davekni
September 16, 2019, 02:26:40 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
September 16, 2019, 01:50:19 AM
post Re: UD2.7 Gate Signals
[Dual Resonant Solid State Tesla coils]
coilinator
September 15, 2019, 08:22:47 PM
post Re: My second DRSSTC
[Dual Resonant Solid State Tesla coils]
erdal
September 15, 2019, 02:09:17 PM
post Re: Homemade HV transformer
[Transformer (ferrite core)]
AlexanderHun
September 15, 2019, 10:39:29 AM
post Re: Homemade HV transformer
[Transformer (ferrite core)]
ElectroXa
September 14, 2019, 07:01:28 PM
post Re: adventures in homemade flyback bobbins.
[Transformer (ferrite core)]
AlexanderHun
September 14, 2019, 06:59:13 PM
post Re: Homemade HV transformer
[Transformer (ferrite core)]
AlexanderHun
September 14, 2019, 06:43:15 PM
post Re: Homemade HV transformer
[Transformer (ferrite core)]
ritaismyconscience
September 14, 2019, 06:35:32 PM
post Homemade HV transformer
[Transformer (ferrite core)]
AlexanderHun
September 14, 2019, 05:05:00 PM
post Re: UD2.7 Gate Signals
[Dual Resonant Solid State Tesla coils]
profdc9
September 14, 2019, 04:50:10 PM
post Re: UD2.7 Gate Signals
[Dual Resonant Solid State Tesla coils]
coilinator
September 14, 2019, 08:42:55 AM
post Re: Transistors good for DRSSTC?
[Dual Resonant Solid State Tesla coils]
ritaismyconscience
September 13, 2019, 05:50:53 AM
post Re: Transistors good for DRSSTC?
[Dual Resonant Solid State Tesla coils]
Max
September 12, 2019, 12:47:03 PM
post Re: Transistors good for DRSSTC?
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
September 12, 2019, 11:07:39 AM
post Re: "karma", "applause/smite" button meaning and use
[General chatting]
Mads Barnkob
September 12, 2019, 11:01:05 AM
post Re: Transistors good for DRSSTC?
[Dual Resonant Solid State Tesla coils]
Hydron
September 12, 2019, 08:44:48 AM
post Transistors good for DRSSTC?
[Dual Resonant Solid State Tesla coils]
ritaismyconscience
September 12, 2019, 05:53:51 AM
post Re: "karma", "applause/smite" button meaning and use
[General chatting]
oneKone
September 12, 2019, 05:37:11 AM
post "karma", "applause/smite" button meaning and use
[General chatting]
MRMILSTAR
September 12, 2019, 05:07:24 AM
post Re: Why did 4HV die??
[General chatting]
oneKone
September 12, 2019, 04:50:24 AM
post Drsstc 4, I'm never stopping
[Dual Resonant Solid State Tesla coils]
oneKone
September 12, 2019, 02:36:00 AM
post Re: Why did 4HV die??
[General chatting]
Hydron
September 12, 2019, 12:34:10 AM
post Re: Why did 4HV die??
[General chatting]
MRMILSTAR
September 11, 2019, 09:29:40 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
MRMILSTAR
September 11, 2019, 09:00:31 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
coilinator
September 11, 2019, 07:54:30 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
freq_out
September 11, 2019, 05:40:14 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30