Author Topic: Next Gen DRSSTC  (Read 6034 times)

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 205
  • Karma: +4/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #40 on: June 20, 2018, 11:07:26 PM »
It may be possible to do this, yes. I believe that the TQFP parts (in Netzpfuscher's PCB) are basically a superset of the QFNs on the dev board, so that any pin selection that works for the dev board can also work for a TQFP based PCB.

Unfortunately the PCBs out in the wild (those from when Steve Ward built his, Netzpfuscher's and one that I have) are designed around a pinout that can't be replicated with a dev board, so there'll always be a need for a couple of different configs. None of this is particularly hard, it's just annoying as someone has to muck about changing stuff for every code release.

Offline Netzpfuscher

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #41 on: June 22, 2018, 07:43:29 AM »
I reorganized the code and found a relatively good solution for the different boards. I split the code in a common code base and the board specific files. The common code is linked in the board specific folders. The _QFN projects are for the dev board and the _TQFP for the classic boards.

If someone gives me the pinout of the dev board version I merge it to the git. I only need the ".cydwr" file. Or clone the new repository and make a pull request.

https://github.com/Netzpfuscher/UD3

common:
binary Binary files like the precompiled bootloader
ntshell Shell code
rtos FreeRTOS code
uart_ldr UART-Bootloader code
ud3core UD3 code

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 187
  • Karma: +7/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #42 on: June 22, 2018, 09:41:05 AM »
Here is what I have for the cydwr attached.  I also changed the clocks around as well.

Thanks,

Dan

Offline Netzpfuscher

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #43 on: July 17, 2018, 07:36:39 AM »
There are a bunch of new features incoming. https://github.com/Netzpfuscher/UD3/tree/burst_mode

  • Ethernet support with a Wiznet W5500
  • Teslaterm with IP-Support
  • Teslaterm now has a MIDI-In. With a virtual MIDI-Port it is possible to send MIDI from every App you like
  • Teslaterm with support for a Korg nanoKONTROL2 controller
  • The UART is equipped with a protocol and transport layer for error detection and retransmission (https://github.com/min-protocol/min)
  • Burst mode interrupter

The Ethernet connects to the 8pin header on the UD3. I think Ethernet is a good choice. It is isolated, cheap and you don't need special Hardware. If you want to run a multi coil system, you can throw a switch between the coils and connect a fiber Ethernet to the computer. If I have the Firmware in a good state, I upload a release in binary form. I think it is much easier to flash a binary for someone who is no programmer ^^

We hit the 2m ^^




« Last Edit: July 17, 2018, 08:06:21 AM by Netzpfuscher »

Offline Netzpfuscher

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #44 on: August 17, 2018, 09:09:30 AM »
I've made several bugfixes. Ethernet is working, Teslaterm is more stable.

Actually I'm working on the duty cycle limiter for the MIDI mode. My first proof of concept works relatively good. There are no more big current spikes if a very high MIDI-Note is playing.


Offline Netzpfuscher

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #45 on: September 09, 2018, 07:59:44 PM »
I've added a new synthesizer in the UD3. The new synthesizer "emulates" the famous SID chip. The UD3 interprets the music on a register level. The noise synthesis of the SID makes a very nice drum effects.

Offline Uspring

  • High Voltage Experimenter
  • **
  • Posts: 77
  • Karma: +5/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #46 on: September 10, 2018, 01:37:22 PM »
Very neat  :)
There was a short discussion on 4hv a few years ago on tricks to enhance TC sounds.
http://4hv.org/e107_plugins/forum/forum_viewtopic.php?157570.0#post_157851

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 205
  • Karma: +4/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #47 on: September 10, 2018, 04:31:16 PM »
Cool, new stuff to play with :)
Unfortunately I haven't had time to do much work on coiling recently, but I will be giving your new code a go when I get a chance. I'll also be in NZ again at the end of the year, so will have my large coil to play with too (I have a 75% finished UD3 board to install into it). On that note, Uspring - I'll be having another go at the toroid current measurements I promised and failed to do in April, this time I will have a lot more time to spare and hopefully won't injure my back trying to lift the coil down out of storage like I did in April!

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 886
  • Karma: +8/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Next Gen DRSSTC
« Reply #48 on: September 12, 2018, 08:56:06 AM »
Great progress on the UD3 Netzpfuscher!

I will set it up as a goal for this winter to get a working UD3 with your software :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Netzpfuscher

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #49 on: September 13, 2018, 08:59:50 AM »
One warning. The newest GIT-Version of the Dev-Board UD3 software has a messy pinout. I need to correct this before I merge it in the master branch. I use the dev-board for ethernet debugging so it is a little bit hackish. In general there is heavy work in progress ^^

I also work on a new PCB revision in Kicad with integrated Ethernet. Ethernet works so great and doesn't need special Hardware. I think it is better to go away from the expensive Altium ^^


Thanks to malte0811 the Teslaterm is growing. He added a scripting feature to automate the coil for show use.
In general the UD3 ist still fully functional with a normal VT100 Terminal.

Offline Netzpfuscher

  • High Voltage Enthusiast
  • *
  • Posts: 35
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #50 on: November 07, 2018, 09:43:57 PM »
I've made Teslaterm and the UD3 more user friendly with a settings form. I found some small bugs in Teslaterm and the UD3 and fixed these. The newest files are in the master branches:

https://github.com/Netzpfuscher/UD3
https://github.com/Netzpfuscher/Teslaterm


Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 205
  • Karma: +4/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #51 on: November 07, 2018, 09:50:32 PM »
Thanks! I'm about to order some boards to upgrade my big coil (in NZ) to a UD3 to use when I'm there over Xmas. Will take some pics/video and also some topload current waveforms to share.

High Voltage Forum

Re: Next Gen DRSSTC
« Reply #51 on: November 07, 2018, 09:50:32 PM »

 


* Recent Topics and Posts

post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
pentode
Today at 08:36:58 AM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
L_Mangold
Today at 02:40:13 AM
post Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
[Dual Resonant Solid State Tesla coils]
dexter
February 22, 2019, 07:47:34 PM
post Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
[Dual Resonant Solid State Tesla coils]
Laci
February 22, 2019, 06:10:35 PM
post Re: Kaizer DRSSTC1 bridge failure and repair, caught on video.
[Dual Resonant Solid State Tesla coils]
Hydron
February 22, 2019, 04:34:54 PM
post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
Hydron
February 22, 2019, 04:34:14 PM
post Kaizer DRSSTC1 bridge failure and repair, caught on video.
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
February 22, 2019, 02:59:46 PM
post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
pentode
February 22, 2019, 12:20:26 PM
post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
Hydron
February 22, 2019, 10:07:23 AM
post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
pentode
February 22, 2019, 08:28:17 AM
post Re: TL494 Flyback driver oscillator section
[Transformer (ferrite core)]
setkiki
February 22, 2019, 04:28:24 AM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
bogdan
February 21, 2019, 06:41:27 PM
post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
Hydron
February 21, 2019, 06:06:46 PM
post Re: Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
February 21, 2019, 03:15:47 PM
post Bleed R's for MMC caps ?
[Dual Resonant Solid State Tesla coils]
pentode
February 21, 2019, 02:54:39 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
Mads Barnkob
February 21, 2019, 09:37:55 AM
post Re: 160mm PLL sstc
[Solid state Tesla coils]
oneKone
February 21, 2019, 04:44:03 AM
post Re: My X-Ray Machine
[X-ray]
Agent Smith
February 20, 2019, 11:10:28 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Teravolt
February 20, 2019, 06:45:41 PM
post Re: Please help me in choosing a driver circuit
[Solid state Tesla coils]
bogdan
February 20, 2019, 03:20:24 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
February 20, 2019, 10:02:24 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
February 20, 2019, 08:42:24 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
February 19, 2019, 08:48:51 AM
post Re: How do I test the max. Ipk of IBGT
[Dual Resonant Solid State Tesla coils]
VNTC
February 19, 2019, 04:54:44 AM
post Re: Primary-Strike Protection Grounding Scheme - Insanity?
[Dual Resonant Solid State Tesla coils]
Teravolt
February 18, 2019, 09:25:24 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Teravolt
February 18, 2019, 09:11:48 PM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Hydron
February 18, 2019, 06:38:29 PM
post My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
February 18, 2019, 05:17:53 PM
post Re: Primary-Strike Protection Grounding Scheme - Insanity?
[Dual Resonant Solid State Tesla coils]
Hydron
February 18, 2019, 08:44:19 AM
post Primary-Strike Protection Grounding Scheme - Insanity?
[Dual Resonant Solid State Tesla coils]
nabzim
February 18, 2019, 05:06:18 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
February 18, 2019, 12:13:02 AM
post Re: A place where I can buy a fiber cable/reciever/transmitter for SSTC interrupter
[Light, lasers and optics]
Laci
February 17, 2019, 08:22:04 PM
post A place where I can buy a fiber cable/reciever/transmitter for SSTC interrupter
[Light, lasers and optics]
FilipŠebík
February 17, 2019, 07:04:54 AM
post Re: How do I test the max. Ipk of IBGT
[Dual Resonant Solid State Tesla coils]
VNTC
February 17, 2019, 03:16:00 AM
post It's been a while since I dabbled:
[Solid state Tesla coils]
T3sl4co1l
February 16, 2019, 06:26:43 PM
post Re: SSTC build as per Steve Ward's Mini SSTC - Final Design
[Solid state Tesla coils]
Mads Barnkob
February 16, 2019, 12:50:30 PM
post Re: How do I test the max. Ipk of IBGT
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
February 16, 2019, 12:47:45 PM
post How do I test the max. Ipk of IBGT
[Dual Resonant Solid State Tesla coils]
VNTC
February 16, 2019, 05:03:21 AM
post Re: SSTC build as per Steve Ward's Mini SSTC - Final Design
[Solid state Tesla coils]
Thunderstruck
February 16, 2019, 02:16:27 AM
post Re: Aliexpress Yunbao pulse skipping Product Guide manual
[Dual Resonant Solid State Tesla coils]
black.yang
February 15, 2019, 08:54:20 AM
post Re: Aliexpress Yunbao pulse skipping Product Guide manual
[Dual Resonant Solid State Tesla coils]
Weston
February 15, 2019, 07:40:34 AM
post Re: Resistor tolerance?
[Beginners]
kamelryttarn
February 14, 2019, 02:27:18 PM
post Re: OneTesla Clone ** Urgent help needed!!
[Dual Resonant Solid State Tesla coils]
TonyHV
February 13, 2019, 11:53:07 PM
post Re: OneTesla Clone ** Urgent help needed!!
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
February 13, 2019, 09:27:51 PM
post Re: OneTesla Clone ** Urgent help needed!!
[Dual Resonant Solid State Tesla coils]
TonyHV
February 13, 2019, 09:06:28 PM
post Re: Aliexpress Yunbao pulse skipping Product Guide manual
[Dual Resonant Solid State Tesla coils]
black.yang
February 13, 2019, 06:57:22 PM
post Aliexpress Yunbao pulse skipping Product Guide manual
[Dual Resonant Solid State Tesla coils]
black.yang
February 13, 2019, 06:55:42 PM
post Re: OneTesla Clone ** Urgent help needed!!
[Dual Resonant Solid State Tesla coils]
pentode
February 13, 2019, 06:44:22 PM
post Re: OneTesla Clone ** Urgent help needed!!
[Dual Resonant Solid State Tesla coils]
TonyHV
February 13, 2019, 05:23:58 PM
post Re: OneTesla Clone ** Urgent help needed!!
[Dual Resonant Solid State Tesla coils]
TonyHV
February 13, 2019, 05:14:58 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30