Author Topic: 10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove  (Read 160 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1569
  • Karma: +28/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove
« on: October 18, 2020, 10:42:01 PM »
This is a teardown video of a 5 zone induction stove with a total power consumption of about 10 kW.

/>
The induction stove is built up on standard 2-zone modules that are likely used in their 1,2,3,4 and 5 zone models, so just mix and match to get the number of zones needed. For a single zone induction zone, a 2-zone PCB is used and only one of the power electronics sections are populated, all control electronics is still in place.





ATMEGA controllers are widely used throughout all the boards and they also maintain the network connection between the boards, presumably over CAN bus.



Two IXYS IXGR40N60 IGBTs in a TO247 package is used, 600V / 65A (200A Icm) for each zone and two zones share a GBJ2510 full bridge rectifier, 1000V / 25A.



Each zone is controlled by a NXP MC56F8322 controller that is a DSP / MCU hybrid with a wide range of I/O, busses and memory options to make it tailored for low cost implementations of many different parts, but few I/O count, applications.

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Max

  • High Voltage Technician
  • ***
  • Posts: 131
  • Karma: +10/-0
  • "With the first link, the chain is forged. [...]"
    • View Profile
    • My Youtube Channel
Re: 10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove
« Reply #1 on: October 18, 2020, 11:57:02 PM »
WOW this thing uses actually EXACTLY the same power PCB as our Miele stove (bought somewhere around 2006/2007 I think. Here's a crappy picture I took when the thing failed a couple years ago and got a new board:


I wonder if they worked together, if there's a company making those and selling them to everyone, or what's the deal.
Edit: Just looked up the "EGO 75.470.439" printed on the sticker and sure enough, it seems to be a generic PCB used by multiple brands: https://duckduckgo.com/?t=ffab&q=EGO+75.470.439&ia=web
Edit2: Ego is indeed a company: http://www.egoproducts.com/en/products/appliance-heating/induction/ They claim to be "pioneers in the field of the generation, use and control of thermal energy and the associated user interfaces."


Kind regards,
Max
« Last Edit: October 19, 2020, 12:07:19 AM by Max »

High Voltage Forum

Re: 10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove
« Reply #1 on: October 18, 2020, 11:57:02 PM »

 


* Recent Topics and Posts

post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
panjaksli
Today at 08:57:34 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 08:17:09 PM
post Re: mini tesla (hopefully not a fail)
[Beginners]
davekni
Today at 08:12:55 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
panjaksli
Today at 07:34:53 PM
post Re: HF Litz wire as a primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 07:14:18 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 07:05:18 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
panjaksli
Today at 06:58:40 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
Today at 06:56:50 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
profdc9
Today at 06:20:35 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
panjaksli
Today at 05:24:23 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
buchtawill
Today at 03:25:59 PM
post Re: Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
panjaksli
Today at 03:02:01 PM
post Have you ever tripped a breaker during normal operation ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
panjaksli
Today at 01:36:04 PM
post Re: mini tesla (hopefully not a fail)
[Beginners]
bogdan
Today at 08:55:06 AM
post Re: HF Litz wire as a primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
johnf
Today at 07:43:14 AM
post Re: How to design FPGA based on EDA technology?
[Electronic Circuits]
Genterman
Today at 06:53:52 AM
post Re: DRSSTC trouble
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 03:29:14 AM
post Re: DRSSTC trouble
[Dual Resonant Solid State Tesla coils (DRSSTC)]
buchtawill
Today at 02:43:33 AM
post Re: SKP DRSSTC = aliexpress driver + medium coil + large bricks ;)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
December 01, 2020, 10:44:31 PM
post Re: mini tesla (hopefully not a fail)
[Beginners]
davekni
December 01, 2020, 07:44:14 PM
post Re: transistor markings question
[Beginners]
davekni
December 01, 2020, 07:39:48 PM
post Re: HF Litz wire as a primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2020, 07:38:53 PM
post Re: How to design FPGA based on EDA technology?
[Electronic Circuits]
petespaco
December 01, 2020, 06:30:33 PM
post Re: Question about arduino polyphonic MIDI interrupter
[Dual Resonant Solid State Tesla coils (DRSSTC)]
bozidar
December 01, 2020, 04:58:29 PM
post Re: Question about arduino polyphonic MIDI interrupter
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
December 01, 2020, 04:22:10 PM
post Re: Question about arduino polyphonic MIDI interrupter
[Dual Resonant Solid State Tesla coils (DRSSTC)]
bozidar
December 01, 2020, 03:02:51 PM
post Re: Half-brigde with pot on mosfet gates question
[Solid State Tesla Coils (SSTC)]
TMaxElectronics
December 01, 2020, 12:08:56 PM
post transistor markings question
[Beginners]
NOOBPASTE51
December 01, 2020, 12:02:19 PM
post Re: Question about arduino polyphonic MIDI interrupter
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
December 01, 2020, 11:55:01 AM
post Re: HF Litz wire as a primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
December 01, 2020, 11:50:19 AM
post Re: Analog HFBR amplifier
[Electronic Circuits]
TMaxElectronics
December 01, 2020, 11:21:56 AM
post Half-brigde with pot on mosfet gates question
[Solid State Tesla Coils (SSTC)]
costas_p
December 01, 2020, 11:17:16 AM
post Re: Question about arduino polyphonic MIDI interrupter
[Dual Resonant Solid State Tesla coils (DRSSTC)]
bozidar
December 01, 2020, 11:11:50 AM
post Re: mini tesla (hopefully not a fail)
[Beginners]
bogdan
December 01, 2020, 09:29:24 AM
post Re: HF Litz wire as a primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
johnf
December 01, 2020, 07:03:56 AM
post Re: How to design FPGA based on EDA technology?
[Electronic Circuits]
johnf
December 01, 2020, 06:49:26 AM
post Re: SSTC or DRSSTC with GaN Transistors
[Solid State Tesla Coils (SSTC)]
Steve Ward
December 01, 2020, 04:59:28 AM
post How to design FPGA based on EDA technology?
[Electronic Circuits]
Genterman
December 01, 2020, 04:02:06 AM
post Re: DRSSTC trouble
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2020, 03:46:10 AM
post Re: DRSSTC trouble
[Dual Resonant Solid State Tesla coils (DRSSTC)]
buchtawill
December 01, 2020, 02:00:54 AM
post Re: HF Litz wire as a primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Steve Ward
December 01, 2020, 01:47:10 AM
post Re: DRSSTC trouble
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2020, 12:02:23 AM
post Re: Site Info desperately needed: http://www.stevehv.4hv.org/
[General Chat]
Mads Barnkob
November 30, 2020, 10:28:56 PM
post Re: I started making a drsstc
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Miki_407
November 30, 2020, 08:58:41 PM
post DRSSTC trouble
[Dual Resonant Solid State Tesla coils (DRSSTC)]
buchtawill
November 30, 2020, 08:53:00 PM
post Re: I started making a drsstc
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2020, 08:49:30 PM
post Re: Simple H-Bridge construction with low parasitic inductances (for SSTC or ...)
[Beginners]
davekni
November 30, 2020, 08:45:46 PM
post Re: mini tesla (hopefully not a fail)
[Beginners]
davekni
November 30, 2020, 06:56:13 PM
post Re: I started making a drsstc
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Miki_407
November 30, 2020, 01:16:04 PM
post Re: I started making a drsstc
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
November 30, 2020, 12:56:05 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal