Author Topic: 10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove  (Read 251 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1615
  • Karma: +29/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove
« on: October 18, 2020, 10:42:01 PM »
This is a teardown video of a 5 zone induction stove with a total power consumption of about 10 kW.

/>
The induction stove is built up on standard 2-zone modules that are likely used in their 1,2,3,4 and 5 zone models, so just mix and match to get the number of zones needed. For a single zone induction zone, a 2-zone PCB is used and only one of the power electronics sections are populated, all control electronics is still in place.





ATMEGA controllers are widely used throughout all the boards and they also maintain the network connection between the boards, presumably over CAN bus.



Two IXYS IXGR40N60 IGBTs in a TO247 package is used, 600V / 65A (200A Icm) for each zone and two zones share a GBJ2510 full bridge rectifier, 1000V / 25A.



Each zone is controlled by a NXP MC56F8322 controller that is a DSP / MCU hybrid with a wide range of I/O, busses and memory options to make it tailored for low cost implementations of many different parts, but few I/O count, applications.

https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Max

  • High Voltage Technician
  • ***
  • Posts: 133
  • Karma: +10/-0
  • "With the first link, the chain is forged. [...]"
    • View Profile
    • My Youtube Channel
Re: 10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove
« Reply #1 on: October 18, 2020, 11:57:02 PM »
WOW this thing uses actually EXACTLY the same power PCB as our Miele stove (bought somewhere around 2006/2007 I think. Here's a crappy picture I took when the thing failed a couple years ago and got a new board:


I wonder if they worked together, if there's a company making those and selling them to everyone, or what's the deal.
Edit: Just looked up the "EGO 75.470.439" printed on the sticker and sure enough, it seems to be a generic PCB used by multiple brands: https://duckduckgo.com/?t=ffab&q=EGO+75.470.439&ia=web
Edit2: Ego is indeed a company: http://www.egoproducts.com/en/products/appliance-heating/induction/ They claim to be "pioneers in the field of the generation, use and control of thermal energy and the associated user interfaces."


Kind regards,
Max
« Last Edit: October 19, 2020, 12:07:19 AM by Max »

High Voltage Forum

Re: 10 kW Induction Stove Teardown, Huge SMEG 5-Zone Stove
« Reply #1 on: October 18, 2020, 11:57:02 PM »

 


* Recent Topics and Posts

post Re: Drsstc Driver Board for Tesla Coil Driver Optic Fiber Splice
[Dual Resonant Solid State Tesla coils (DRSSTC)]
iw1esu
Today at 01:56:54 PM
post Cap Identification 64KV
[Capacitor Banks]
Thermionix
Today at 07:14:33 AM
post Re: ZVS driven Plasma Ball (w/ segmented PTFE Secondary)
[Transformer (Ferrite Core)]
zytra
Today at 05:20:21 AM
post Re: ZVS driven Plasma Ball (w/ segmented PTFE Secondary)
[Transformer (Ferrite Core)]
klugesmith
Today at 03:44:12 AM
post Re: ZVS driven Plasma Ball (w/ segmented PTFE Secondary)
[Transformer (Ferrite Core)]
davekni
Today at 03:31:35 AM
post Re: ZVS driven Plasma Ball (w/ segmented PTFE Secondary)
[Transformer (Ferrite Core)]
zytra
Today at 03:01:47 AM
post Re: Cold Gas Satellite Thruster
[General Chat]
klugesmith
Today at 02:53:23 AM
post Re: ZVS driven Plasma Ball (w/ segmented PTFE Secondary)
[Transformer (Ferrite Core)]
davekni
Today at 02:52:00 AM
post Cold Gas Satellite Thruster
[General Chat]
Patrick
Today at 02:02:40 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
Today at 01:04:03 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
davekni
Today at 12:39:10 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 19, 2021, 11:13:22 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
AeraCura_
January 19, 2021, 10:45:50 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
N1G3L
January 19, 2021, 09:17:18 PM
post Re: Alcatel Lucent B4 RRH2x60-4R teardown and reverse engineering
[Radio Frequency]
Da_Stier
January 19, 2021, 06:20:10 PM
post Fusor power supply
[Voltage Multipliers]
hammertone
January 19, 2021, 05:27:02 PM
post Re: Just a noob with some HV concerns...
[Beginners]
MrScrOggs
January 19, 2021, 01:21:13 PM
post Re: Just a noob with some HV concerns...
[Beginners]
klugesmith
January 19, 2021, 07:04:16 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 19, 2021, 06:37:53 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 19, 2021, 06:16:41 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 19, 2021, 05:00:50 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 19, 2021, 04:03:12 AM
post Just a noob with some HV concerns...
[Beginners]
MrScrOggs
January 19, 2021, 03:07:11 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 19, 2021, 02:57:27 AM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
January 19, 2021, 12:06:44 AM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 18, 2021, 11:56:31 PM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
Alberto
January 18, 2021, 11:50:22 PM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
klugesmith
January 18, 2021, 10:30:15 PM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 18, 2021, 10:03:46 PM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 18, 2021, 09:58:44 PM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 18, 2021, 08:52:29 PM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 18, 2021, 07:08:09 PM
post Re: Adding interrupter Self oscillating tesla coil
[Beginners]
davekni
January 18, 2021, 06:49:28 PM
post Re: Alcatel Lucent B4 RRH2x60-4R teardown and reverse engineering
[Radio Frequency]
Da_Stier
January 18, 2021, 06:12:44 PM
post Re: Segmented PTFE Secondary, Large Plasma Ball project
[Transformer (Ferrite Core)]
klugesmith
January 18, 2021, 04:53:23 PM
post Adding interrupter Self oscillating tesla coil
[Beginners]
arto
January 18, 2021, 11:54:54 AM
post Re: Segmented PTFE Secondary, Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 18, 2021, 08:27:18 AM
post Re: Self Oscillating Half Bridge Wonder
[Solid State Tesla Coils (SSTC)]
Acid Byte
January 18, 2021, 06:57:06 AM
post Re: Segmented PTFE Secondary, Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 18, 2021, 06:43:19 AM
post Re: Segmented PTFE Secondary, Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 18, 2021, 05:48:27 AM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
klugesmith
January 18, 2021, 01:03:48 AM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
Alberto
January 18, 2021, 12:26:26 AM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
davekni
January 17, 2021, 11:29:04 PM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
Alberto
January 17, 2021, 09:55:24 PM
post Re: Segmented PTFE Secondary, Plasma Ball project
[Transformer (Ferrite Core)]
zytra
January 17, 2021, 09:34:21 PM
post Re: Segmented PTFE Secondary, Plasma Ball project
[Transformer (Ferrite Core)]
davekni
January 17, 2021, 08:51:50 PM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
davekni
January 17, 2021, 08:04:54 PM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
tophat
January 17, 2021, 05:40:59 PM
post Re: Schlieren images projected onto a wall (no camera)
[Light, Lasers and Optics]
Uspring
January 17, 2021, 05:12:45 PM
post Re: how to run these guys?
[Transformer (Ferrite Core)]
SteveN87
January 17, 2021, 02:20:09 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal