Author Topic: Estimating spark length voltage  (Read 3944 times)

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 315
  • Karma: +8/-0
    • View Profile
Estimating spark length voltage
« on: September 06, 2017, 02:29:57 AM »
Hey,
A while ago (about 7 years) I read somewhere that a general rule of thumb for estimating a spark length is 1kv for 1mm. I've been blindly using this concept without actually looking into it. I've tried to find some answers but it seems my Google skills are not upto the task!

So basically the question is, is 1kv equal to 1mm or is this far from accurate....... I'm equating my 400mm spark length on my sstc is 400kv.

Cheers,
Chris
« Last Edit: September 06, 2017, 09:59:10 AM by Mads Barnkob »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1454
  • Karma: +24/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Estimating spark length voktage
« Reply #1 on: September 06, 2017, 09:58:05 AM »
The old 10 kV/cm rule does not apply here, I seem to recall that it is for DC current between pointy objects, the attached short description goes into further detail on the required breakdown voltage for different spark gap geometries.

Tesla coils does however operate quite differently. We charge up a topload, secondary top capacitance, with as many electrons as possible, before the voltage is high enough to break down the dialectric strength of atmospheric air. This can differ with temperature, moisture and pressure.

The topload voltage will always be the greatest just before there is a spark formed, as this is when the charge is at its highest, once the spark starts to grow it represents a larger and larger load to the topload and as current goes up while discharging the energy, the voltage drops significantly.

This is just a bold statement, that for a Tesla coil we are more in the league of 3 kV/cm for long sparks. Terry Fritz once made some measurements on this: https://deanostoybox.com/hot-streamer/TeslaCoils/MyPapers/planant/waveant3.html

Hydron also posted a lot of topload/breakout point current measurements, these numbers can be used to calculate the topload voltage: https://highvoltageforum.net/index.php?topic=117.msg735;topicseen#new
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Uspring

  • High Voltage Technician
  • ***
  • Posts: 171
  • Karma: +12/-0
  • Physicist
    • View Profile
Re: Estimating spark length voltage
« Reply #2 on: September 06, 2017, 04:47:14 PM »
The differences between DC and AC arcs are mainly 2: An AC arc can end in midair and it usually lasts much longer. The AC arc can grow over many cycles by current flowing back and forth along it, keeping it hot. So once a small arc has broke out, it will establish a conductive channel to its tip from where the arc can grow further. The arc channel won't be a perfect conductor, so the voltage at its tip will gradually decrease as it gets longer. This will basically limit its length. In principle arc length and voltage don't even have to be linearly related. Probably higher frequency arcs are also longer for a given voltage, since charges are more often pushed back and forth, making it hotter and more conductive.

If you're into math, you might want to read https://www.pupman.com/listarchives/2012/Oct/msg00125.html

A back of the envelope calculation based on Hydrons data seems to indicate a voltage of about 300kV for an arc length somewhat above 2 m, i.e. 1.5kV/cm.

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 315
  • Karma: +8/-0
    • View Profile
Re: Estimating spark length voltage
« Reply #3 on: September 07, 2017, 01:40:46 AM »
Cheers for the replies and the links. Looking forward to understanding further

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Estimating spark length voltage
« Reply #4 on: February 17, 2018, 12:12:40 AM »
I couldn't get an arc from a mot with 2kv output, at something like 0.3 maybe 0.4mm. It depends a lot on air humidity.

High Voltage Forum

Re: Estimating spark length voltage
« Reply #4 on: February 17, 2018, 12:12:40 AM »

 


* Recent Topics and Posts

post Re: Budget USB cameras
[High Speed Filming]
missoum0514
Today at 06:56:08 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
Today at 05:23:15 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
Today at 05:02:26 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
Today at 04:31:04 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
Today at 10:05:59 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
Today at 08:21:26 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 11:45:38 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 08:10:47 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
Uspring
August 02, 2020, 07:27:33 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
Uspring
August 02, 2020, 07:14:17 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
August 02, 2020, 06:58:34 PM
post Re: current limiting to parallel resonance circuit
[Beginners]
davekni
August 02, 2020, 06:49:59 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 05:10:12 PM
post Re: Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 02, 2020, 04:55:14 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:20:13 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 02, 2020, 04:05:12 PM
post Dual MOT tesla coil
[Spark Gap Tesla Coils (SGTC)]
Jun
August 02, 2020, 01:07:54 PM
post current limiting to parallel resonance circuit
[Beginners]
plasma
August 02, 2020, 07:13:54 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
August 02, 2020, 02:26:11 AM
post Re: FPS1000HD unboxing and first impression
[High Speed Filming]
missoum0514
August 01, 2020, 11:57:24 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
TMaxElectronics
August 01, 2020, 10:24:21 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
klugesmith
August 01, 2020, 03:59:43 PM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
August 01, 2020, 06:22:53 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 07:32:09 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 06:15:27 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 05:38:49 PM
post Re: Corona lockdown thread, tell about your situation
[General Chat]
klugesmith
July 31, 2020, 04:35:43 PM
post Re: MIDI videos from my DRSSTC1/2/3 demonstrations/shows
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 31, 2020, 02:33:48 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
July 31, 2020, 01:47:51 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
July 31, 2020, 10:51:47 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
davekni
July 31, 2020, 06:37:20 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
July 31, 2020, 04:11:14 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 02:33:30 AM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Halfcorp
July 31, 2020, 01:29:05 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 31, 2020, 12:38:28 AM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
Mads Barnkob
July 31, 2020, 12:13:43 AM
post Re: How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
johnf
July 30, 2020, 09:51:25 PM
post Re: Is my xray transformer a ferrite core and how would I drive it?
[Transformer (Ferrite Core)]
nielsquake
July 30, 2020, 09:50:16 PM
post How much is the voltage used in Corona Discharge tubes for ozone Generation?
[Transformer (Ferrite Core)]
UB_Serpent
July 30, 2020, 02:05:39 PM
post Re: compact midi interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
July 30, 2020, 03:14:53 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 29, 2020, 10:00:44 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
July 29, 2020, 06:09:14 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
July 29, 2020, 12:52:24 PM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 29, 2020, 08:32:00 AM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 29, 2020, 05:23:35 AM
post Re: IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 29, 2020, 04:34:02 AM
post IGBT Selection
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Halfcorp
July 29, 2020, 01:56:26 AM
post Re: my 4" coil turned to a 6" at 68"+ arcs
[Spark Gap Tesla Coils (SGTC)]
Bradselph
July 28, 2020, 10:33:09 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Halfcorp
July 28, 2020, 01:14:38 PM
post Re: Easy to build Polyphonic MIDI Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
futurist
July 28, 2020, 01:11:56 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal