Author Topic: Estimating spark length voltage  (Read 3127 times)

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 289
  • Karma: +8/-0
    • View Profile
Estimating spark length voltage
« on: September 06, 2017, 02:29:57 AM »
Hey,
A while ago (about 7 years) I read somewhere that a general rule of thumb for estimating a spark length is 1kv for 1mm. I've been blindly using this concept without actually looking into it. I've tried to find some answers but it seems my Google skills are not upto the task!

So basically the question is, is 1kv equal to 1mm or is this far from accurate....... I'm equating my 400mm spark length on my sstc is 400kv.

Cheers,
Chris
« Last Edit: September 06, 2017, 09:59:10 AM by Mads Barnkob »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1232
  • Karma: +17/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Estimating spark length voktage
« Reply #1 on: September 06, 2017, 09:58:05 AM »
The old 10 kV/cm rule does not apply here, I seem to recall that it is for DC current between pointy objects, the attached short description goes into further detail on the required breakdown voltage for different spark gap geometries.

Tesla coils does however operate quite differently. We charge up a topload, secondary top capacitance, with as many electrons as possible, before the voltage is high enough to break down the dialectric strength of atmospheric air. This can differ with temperature, moisture and pressure.

The topload voltage will always be the greatest just before there is a spark formed, as this is when the charge is at its highest, once the spark starts to grow it represents a larger and larger load to the topload and as current goes up while discharging the energy, the voltage drops significantly.

This is just a bold statement, that for a Tesla coil we are more in the league of 3 kV/cm for long sparks. Terry Fritz once made some measurements on this: https://deanostoybox.com/hot-streamer/TeslaCoils/MyPapers/planant/waveant3.html

Hydron also posted a lot of topload/breakout point current measurements, these numbers can be used to calculate the topload voltage: https://highvoltageforum.net/index.php?topic=117.msg735;topicseen#new
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Uspring

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +9/-0
  • Physicist
    • View Profile
Re: Estimating spark length voltage
« Reply #2 on: September 06, 2017, 04:47:14 PM »
The differences between DC and AC arcs are mainly 2: An AC arc can end in midair and it usually lasts much longer. The AC arc can grow over many cycles by current flowing back and forth along it, keeping it hot. So once a small arc has broke out, it will establish a conductive channel to its tip from where the arc can grow further. The arc channel won't be a perfect conductor, so the voltage at its tip will gradually decrease as it gets longer. This will basically limit its length. In principle arc length and voltage don't even have to be linearly related. Probably higher frequency arcs are also longer for a given voltage, since charges are more often pushed back and forth, making it hotter and more conductive.

If you're into math, you might want to read https://www.pupman.com/listarchives/2012/Oct/msg00125.html

A back of the envelope calculation based on Hydrons data seems to indicate a voltage of about 300kV for an arc length somewhat above 2 m, i.e. 1.5kV/cm.

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 289
  • Karma: +8/-0
    • View Profile
Re: Estimating spark length voltage
« Reply #3 on: September 07, 2017, 01:40:46 AM »
Cheers for the replies and the links. Looking forward to understanding further

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Estimating spark length voltage
« Reply #4 on: February 17, 2018, 12:12:40 AM »
I couldn't get an arc from a mot with 2kv output, at something like 0.3 maybe 0.4mm. It depends a lot on air humidity.

High Voltage Forum

Re: Estimating spark length voltage
« Reply #4 on: February 17, 2018, 12:12:40 AM »

 


* Recent Topics and Posts

post Small DIY plasma globe using ZVS oscillator
[Transformer (Ferrite Core)]
davekni
Today at 06:21:31 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
Today at 05:54:17 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
Today at 05:45:43 AM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Twospoons
January 21, 2020, 10:54:44 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mads Barnkob
January 21, 2020, 08:05:20 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mysteriousduck
January 21, 2020, 03:49:24 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mads Barnkob
January 21, 2020, 08:37:14 AM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
klugesmith
January 20, 2020, 11:10:05 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
T3sl4co1l
January 20, 2020, 10:55:35 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
davekni
January 20, 2020, 09:48:06 PM
post Re: DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Twospoons
January 20, 2020, 08:31:54 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
SteveN87
January 20, 2020, 12:59:19 PM
post DSO138, Not Even Once
[Laboratories, Equipment and Tools]
Mads Barnkob
January 20, 2020, 11:13:23 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
HVZapp
January 20, 2020, 10:23:03 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
January 20, 2020, 05:55:07 AM
post Re: Why does this happen.
[General Chat]
thedoc298
January 19, 2020, 09:43:26 PM
post Re: Why does this happen.
[General Chat]
Mads Barnkob
January 19, 2020, 09:07:51 PM
post JavaTC question
[General Chat]
thedoc298
January 19, 2020, 09:01:06 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
January 19, 2020, 01:08:17 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
January 19, 2020, 12:36:56 PM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
Mysteriousduck
January 19, 2020, 04:06:36 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
rvpilot
January 19, 2020, 02:00:30 AM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
T3sl4co1l
January 18, 2020, 08:51:26 PM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
klugesmith
January 18, 2020, 06:53:02 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Mysteriousduck
January 18, 2020, 05:19:49 AM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
Mysteriousduck
January 18, 2020, 04:41:22 AM
post Re: 500Khz Induction Heater - Need help with Driver
[Beginners]
T3sl4co1l
January 18, 2020, 12:30:19 AM
post 500Khz Induction Heater - Need help with Driver
[Beginners]
Mysteriousduck
January 17, 2020, 11:17:33 PM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
klugesmith
January 17, 2020, 08:55:37 PM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
T3sl4co1l
January 17, 2020, 04:01:23 PM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
RobertL
January 17, 2020, 04:22:25 AM
post Re: Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
Twospoons
January 17, 2020, 01:37:37 AM
post Energy and Efficiency
[Induction Launchers, Coil Guns and Rails guns]
RobertL
January 16, 2020, 11:51:51 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Netzpfuscher
January 16, 2020, 11:59:04 AM
post Re: Easy Oscillator for Induction Heating and, Maybe Tesla Coil Power?
[Electronic Circuits]
T3sl4co1l
January 16, 2020, 02:53:32 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
January 15, 2020, 08:57:37 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 15, 2020, 07:27:10 PM
post Re: Universal bus precharge & fan speed controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
January 15, 2020, 07:08:00 PM
post Re: Easy Oscillator for Induction Heating and, Maybe Tesla Coil Power?
[Electronic Circuits]
Mads Barnkob
January 15, 2020, 01:26:57 PM
post Re: Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
SteveN87
January 15, 2020, 12:37:28 PM
post Re: Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
Twospoons
January 15, 2020, 01:15:45 AM
post Easy Oscillator for Induction Heating and, Maybe Tesla Coil Power?
[Electronic Circuits]
petespaco
January 14, 2020, 11:19:23 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Nicko
January 14, 2020, 10:50:54 PM
post Ebay [US] 1x CM300HA-24H H-series, 20$ for a single switch brick
[Sell / Buy / Trade]
Mads Barnkob
January 14, 2020, 08:24:10 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
T3sl4co1l
January 14, 2020, 07:36:14 PM
post Re: Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
shrad
January 14, 2020, 12:51:32 PM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
davekni
January 14, 2020, 05:27:11 AM
post Re: Mazilli ZVS Driver Modification Problems
[Transformer (Ferrite Core)]
Andrew321
January 14, 2020, 02:27:54 AM
post Re: Ok now I'm stuck ¯\_(ツ)_/¯
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dj.cosmo.esq
January 13, 2020, 11:42:07 PM
post Commercial circuit simulator Micro-Cap 12 is now free to download
[Laboratories, Equipment and Tools]
Mads Barnkob
January 13, 2020, 11:30:11 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal