Author Topic: Mounting LCD CFL's around DRSSTC?  (Read 134 times)

Offline fafler

  • High Voltage Enthusiast
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Mounting LCD CFL's around DRSSTC?
« on: May 13, 2019, 07:58:25 PM »
Hi. I have recently brought my very first DRSST, and want to build a nice base for it to make it look good and also make it easier to set up. I have some of those really thin CFL tubes used in LCD screens laying around that I would like to incorporate into the design. Is there anything that would make it a really bad idea so mount 6 or 8 of them vertically around the secondary from top to bottom, to have them light up when the tesla coil is active? Like they gonna burn out after a short while or mess with the resonance or whatever?

Also, which material is recommended for the base, containing the electronics? Is it preferable to shield it in metal or does it have to be something none-conducting?

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1014
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Mounting LCD CFL's around DRSSTC?
« Reply #1 on: May 15, 2019, 12:46:33 PM »
Anything in the vicinity of a Tesla coil will affect it resonant frequency.

You should place the tubes so far away from the secondary that no sparks will hit the tubes, else they will at some point punch through the thin glass.

I always use a non-conductive material for the base, most of it can be wood, directly contact to conductors should be plastic. Always put your sensitive driver circuits inside a metal enclosure for shielding for EMI. Inverter and power electronics can sit unshielded without problems.

You should read my DRSSTC design guide on my website, despite you bought a DRSSTC, there is still a lot to learn about how it works :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Mounting LCD CFL's around DRSSTC?
« Reply #1 on: May 15, 2019, 12:46:33 PM »

 


* Recent Topics and Posts

post Re: CRT hacking ideas....
[Electronic circuits]
badpeter
June 18, 2019, 11:35:16 PM
post Re: CRT hacking ideas....
[Electronic circuits]
Mads Barnkob
June 18, 2019, 08:22:23 PM
post CRT hacking ideas....
[Electronic circuits]
badpeter
June 18, 2019, 07:20:16 PM
post Re: Is one of these good?
[Dual Resonant Solid State Tesla coils]
VNTC
June 18, 2019, 12:16:43 PM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Uspring
June 18, 2019, 11:45:53 AM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
June 17, 2019, 09:01:29 PM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
June 17, 2019, 08:54:41 PM
post Re: Bought huge capacitors
[Capacitor banks]
MRMILSTAR
June 17, 2019, 04:34:02 PM
post Re: How energy flow through a DRSSTC?
[Dual Resonant Solid State Tesla coils]
Uspring
June 17, 2019, 03:13:03 PM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Uspring
June 17, 2019, 02:40:06 PM
post Re: What happens when L and C are not matched?
[Electronic circuits]
klugesmith
June 17, 2019, 01:17:36 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
June 17, 2019, 11:13:33 AM
post Re: Where to buy Tesla coil capacitors?
[Spark gap Tesla coils]
Mads Barnkob
June 17, 2019, 10:46:56 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
June 17, 2019, 08:01:10 AM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
VNTC
June 17, 2019, 04:19:07 AM
post How energy flow through a DRSSTC?
[Dual Resonant Solid State Tesla coils]
VNTC
June 17, 2019, 04:05:33 AM
post Re: Tungsten
[Spark gap Tesla coils]
thedoc298
June 17, 2019, 12:02:39 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
June 16, 2019, 09:00:31 PM
post Re: Bought huge capacitors
[Capacitor banks]
dexter
June 16, 2019, 08:25:16 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
June 16, 2019, 07:06:48 PM
post Re: Bought huge capacitors
[Capacitor banks]
MRMILSTAR
June 16, 2019, 06:07:06 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
June 16, 2019, 04:51:26 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
June 16, 2019, 03:39:30 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
June 16, 2019, 03:39:15 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils]
Hydron
June 16, 2019, 03:18:25 PM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Hydron
June 16, 2019, 03:10:15 PM
post Re: Bought huge capacitors
[Capacitor banks]
Max
June 16, 2019, 12:25:59 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
June 16, 2019, 09:38:15 AM
post Re: Top of secondary
[Spark gap Tesla coils]
MRMILSTAR
June 16, 2019, 05:45:47 AM
post Re: Tungsten
[Spark gap Tesla coils]
MRMILSTAR
June 16, 2019, 05:40:52 AM
post Tungsten
[Spark gap Tesla coils]
thedoc298
June 16, 2019, 03:51:12 AM
post Re: Last question
[Spark gap Tesla coils]
thedoc298
June 16, 2019, 03:44:43 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
June 16, 2019, 12:03:50 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
June 15, 2019, 09:27:30 PM
post Re: Advice sought for self build 15kV 50Hz 150mW supply
[Transformer (iron core)]
jonnie
June 15, 2019, 06:38:28 PM
post Re: Best way to discharge capacitors ?
[Capacitor banks]
MRMILSTAR
June 15, 2019, 05:49:12 PM
post Re: "LightningStorm" VTTC project
[Vacuum tube Tesla coils]
MRMILSTAR
June 15, 2019, 05:38:30 PM
post Re: Voltage Multipliers keep destroying drivers
[Voltage Multipliers]
MRMILSTAR
June 15, 2019, 05:19:35 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
June 15, 2019, 09:25:07 AM
post Re: Static electricity measurement
[Static electricity]
johnf
June 15, 2019, 08:47:17 AM
post Re: Brainstorming next coil sync, Async RSGTC, duel mot, or NSTs.
[Spark gap Tesla coils]
MRMILSTAR
June 15, 2019, 06:51:09 AM
post Power in/transfer/out in an original Tesla coil
[Dual Resonant Solid State Tesla coils]
VNTC
June 15, 2019, 06:49:06 AM
post Re: Rotoray spark gap motor power
[Spark gap Tesla coils]
MRMILSTAR
June 15, 2019, 06:35:48 AM
post Re: Are bleeder resistors necessary if I can easily discharge my capacitor?
[Spark gap Tesla coils]
MRMILSTAR
June 15, 2019, 06:21:45 AM
post Re: Last question
[Spark gap Tesla coils]
MRMILSTAR
June 15, 2019, 06:00:36 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
June 15, 2019, 02:00:16 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
June 14, 2019, 10:19:02 PM
post Re: Where to buy Tesla coil capacitors?
[Spark gap Tesla coils]
MRMILSTAR
June 14, 2019, 06:10:11 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
June 14, 2019, 02:38:13 PM
post A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Uspring
June 14, 2019, 01:18:38 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30