Author Topic: TO-247 IGBT Comparison for High Frequency & Paralleled Operation  (Read 642 times)

Offline Laci

  • High Voltage Engineer
  • ****
  • Posts: 204
  • Karma: +6/-0
    • View Profile
TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« on: December 17, 2018, 09:36:03 PM »
Hi,Guys!
I found some pretty nice IGBTs,but I'm not sure which ones are the best in a full bridge alone and paralelled for a high frequency coil(maybe QCW,250kHz-400kHz).

*FGH60N60
   180A peak,198W maximum power dissipation,0.33°C/W
   https://www.mouser.com/ds/2/149/FGH60N60UFD-889110.pdf


*FGA60N65
   180A peak,600W maximum power dissipation,0.25°C/W
   https://datasheet.octopart.com/FGA60N65SMD-Fairchild-Semiconductor-datasheet-68791176.pdf

*IRG4PC60U
   300A peak,520W maximum power dissipation,0.24°C/W
   http://www.irf.com/product-info/datasheets/data/irg4pc60u.pdf


The last one seems to be the best,but I never saw other coilers using it.Does anybody have experience with them,or knows other better IGBT?Any help would be greatly appreciated!

Offline Fumeaux

  • High Voltage Experimenter
  • **
  • Posts: 60
  • Karma: +7/-0
    • View Profile
Re: TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« Reply #1 on: December 17, 2018, 10:22:31 PM »
I can tell you as much as max amps isn't everything. Especially as you want a rather high frequency, rise and fall times matter a lot. The longer the switching needs, the more power gets turned into heat. I recommend you stick to what others have used, with similar coils/frequency. Look for something ward used or possibly if these aren't produced anymore, check loneoceans qcw-coils out. Choosing your own parts isn't as easy as one might think. There are many factors to consider and there is no shame in copying someone's design.

And if noone else used it, there is probably a reason behind it.

Offline sjsimmo

  • High Voltage Enthusiast
  • *
  • Posts: 34
  • Karma: +3/-0
  • Australia
    • View Profile
Re: TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« Reply #2 on: December 18, 2018, 03:18:05 AM »
loneoceans used FGH60N65SMD (electrically equivalent to the FGA60N60SMD) in his QCW2 coil which had a resonant frequency of 308kHz. Note that the 'UFD' variety of FGH60N60 only has about half the power dissipation of the 'SMD' variety, so if you want to use a FGH60N60, I'd go for the SMD model, rather than the one you've listed.
Steve Ward also used the FGH60N60SMDs in his '"Fat Coil" QCW Tesla Coil', which had 8 H-bridges paralleled.  :)

I don't know of anyone (other than yourself) who has used IRG4PC60U in a DRSSTC or QCW coil. Looking at the datasheet, it seems that it's about twice as slow as the other two, so probably not as good a choice (looking at rise, fall, turn-on delay and turn-off delay times)... But I could be wrong ;). That said, it does have a higher peak current rating, which could be useful at lower frequencies.

I'm currently using the FGY75N60SMD in my DRSSTC, but I haven't pushed them very hard yet, so I don't know their limits. They're slightly slower than FGH60N60SMD, but still faster than IRG4PC60U, and are rated for 225A peak.
I like my food cooked with lightning.

Offline Laci

  • High Voltage Engineer
  • ****
  • Posts: 204
  • Karma: +6/-0
    • View Profile
Re: TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« Reply #3 on: December 18, 2018, 09:25:26 PM »
Thanks for the advices!
Sadly the store went on vacation and I can't order the parts until 20 January :( .I will try to run dual resonant with my current HGTG30N60A4D full bridge,but just carefully not to destroy them(under 250Ap)after I repair my oneTesla interrupter's SD card function,which isn't working.Another interesting experiment would be a IRFP460 bridge ramped,maybe buck modulated with high primary impedance to keep peak currents low.I will try that out with my small coils!

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1021
  • Karma: +16/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« Reply #4 on: December 18, 2018, 09:42:25 PM »
Thanks for the advices!
Sadly the store went on vacation and I can't order the parts until 20 January :( .I will try to run dual resonant with my current HGTG30N60A4D full bridge,but just carefully not to destroy them(under 250Ap)after I repair my oneTesla interrupter's SD card function,which isn't working.Another interesting experiment would be a IRFP460 bridge ramped,maybe buck modulated with high primary impedance to keep peak currents low.I will try that out with my small coils!

Just get the calculator out as sjsimmo did in his thread and you know all about those IGBTs :)

On a side-note, I had a onetesla midi interrupter returned to them because of malfunctioning sd card reader, it needed resoldering/reflow, whatever, it had bad connection and sd card would not stay in. I did not get a new unit but a repaired board back, which was not done very nicely :(
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Laci

  • High Voltage Engineer
  • ****
  • Posts: 204
  • Karma: +6/-0
    • View Profile
Re: TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« Reply #5 on: December 18, 2018, 10:30:34 PM »
I built the interrupter myself :D It uses a microSD SPI module,but the LCD screen glitches when I accidently touch it's metal screws while the coil is working.I hope the microSD module hasn't died, although the screen displays "No card found" everytime.The interrupter is already a big mess,so it'll be hard to desolder it I guess...
« Last Edit: December 18, 2018, 10:39:11 PM by Laci »

High Voltage Forum

Re: TO-247 IGBT Comparison for High Frequency & Paralleled Operation
« Reply #5 on: December 18, 2018, 10:30:34 PM »

 


* Recent Topics and Posts

post Re: "LightningStorm" VTTC project
[Vacuum tube Tesla coils]
Avenger
Today at 03:18:07 PM
post Re: Onetesla TS driver board for OWN coil need some help
[Dual Resonant Solid State Tesla coils]
donnersm
Today at 03:18:03 PM
post Re: Onetesla TS driver board for OWN coil need some help
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
Today at 02:56:29 PM
post Re: SSTC interruptor not working
[Solid state Tesla coils]
Mads Barnkob
Today at 11:46:44 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
Today at 11:45:11 AM
post Re: "LightningStorm" VTTC project
[Vacuum tube Tesla coils]
Mads Barnkob
Today at 11:40:18 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
Today at 07:46:25 AM
post Re: Si-wafers, ideas?
[Electronic circuits]
Weston
Today at 07:07:57 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
Today at 05:45:55 AM
post Re: My first DRSSTC on bricks
[Dual Resonant Solid State Tesla coils]
Laci
June 24, 2019, 09:26:47 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
June 24, 2019, 04:58:39 PM
post Re: Static electricity measurement
[Static electricity]
Doros
June 24, 2019, 01:56:17 PM
post Re: "LightningStorm" VTTC project
[Vacuum tube Tesla coils]
Avenger
June 24, 2019, 01:28:59 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Patrick
June 24, 2019, 12:47:16 AM
post SSTC interruptor not working
[Solid state Tesla coils]
juuzpo
June 23, 2019, 10:58:48 PM
post Re: Is one of these good?
[Dual Resonant Solid State Tesla coils]
Golddustpeak
June 23, 2019, 07:22:47 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Jeff B
June 23, 2019, 05:52:56 PM
post Re: Onetesla TS driver board for OWN coil need some help
[Dual Resonant Solid State Tesla coils]
dexter
June 23, 2019, 03:15:53 PM
post Onetesla TS driver board for OWN coil need some help
[Dual Resonant Solid State Tesla coils]
donnersm
June 23, 2019, 10:09:40 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Patrick
June 23, 2019, 10:07:04 AM
post Vacuum Epoxy Potting Attempt in Progress... (Pic Update 6/23/19)
[Transformer (ferrite core)]
Patrick
June 23, 2019, 08:50:14 AM
post Re: Si-wafers, ideas?
[Electronic circuits]
johnf
June 23, 2019, 01:28:20 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Twospoons
June 23, 2019, 01:17:50 AM
post Re: Si-wafers, ideas?
[Electronic circuits]
Twospoons
June 23, 2019, 01:04:13 AM
post Re: What happens when L and C are not matched?
[Electronic circuits]
Twospoons
June 23, 2019, 01:02:55 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Coupling
June 22, 2019, 11:10:02 PM
post Re: ZVS Mazzilli circ with active gate driver - what causes ringing?
[Electronic circuits]
flyrod
June 22, 2019, 08:45:17 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
flyrod
June 22, 2019, 08:36:34 PM
post Impressive 500,000 watt radio station from the 1930's
[Electronic circuits]
petespaco
June 22, 2019, 06:18:22 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
June 22, 2019, 05:47:22 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
T3sl4co1l
June 22, 2019, 05:21:58 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
hightemp1
June 22, 2019, 06:10:01 AM
post Re: Siemens Polyphos 30 xray machine
[X-ray]
Mads Barnkob
June 21, 2019, 09:08:16 AM
post Re: Choke-input DC-filter
[Electronic circuits]
johnf
June 20, 2019, 08:58:07 PM
post Re: CRT hacking ideas....
[Electronic circuits]
badpeter
June 20, 2019, 07:28:00 PM
post Re: Ideas needed!
[General chatting]
MRMILSTAR
June 20, 2019, 05:13:57 PM
post Re: Why did 4HV die??
[General chatting]
MRMILSTAR
June 20, 2019, 05:07:41 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Bert911
June 20, 2019, 02:14:55 PM
post Re: Choke-input DC-filter
[Electronic circuits]
kamelryttarn
June 20, 2019, 12:53:58 PM
post Re: Choke-input DC-filter
[Electronic circuits]
johnf
June 20, 2019, 12:09:27 PM
post Choke-input DC-filter
[Electronic circuits]
kamelryttarn
June 20, 2019, 11:43:58 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
shrad
June 20, 2019, 08:57:42 AM
post Re: adventures in homemade flyback bobbins.
[Transformer (ferrite core)]
Patrick
June 20, 2019, 04:06:00 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
johnf
June 20, 2019, 03:50:56 AM
post Re: CRT hacking ideas....
[Electronic circuits]
petespaco
June 19, 2019, 11:29:28 PM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Uspring
June 19, 2019, 01:40:16 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
June 19, 2019, 10:49:45 AM
post Re: A dynamical arc model v2
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
June 19, 2019, 10:43:32 AM
post Re: Light, laser and optics - Link collection
[Light, lasers and optics]
shrad
June 19, 2019, 10:03:54 AM
post Re: How go get single mode optic fiber to work
[Light, lasers and optics]
shrad
June 19, 2019, 10:02:21 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30