High Voltage Forum

General electronics => Electronic circuits => Topic started by: petespaco on December 11, 2017, 04:30:06 PM

Title: induction heating/Blacksmithing
Post by: petespaco on December 11, 2017, 04:30:06 PM
Mads mentioned using an induction heater for blacksmithing; making knives.
  I do a fair amount of blacksmithing myself but am not a knife maker:
https://spaco.org/bk.htm

Anyway, I am very tempted to get one of the 7KW (sold as 15KW)  induction heaters from China.
Here's a guy in the USA who does a great job of explaining how they work and how to get one:
/>If you are at all interested in what he has to say, be sure to watch all of his videos on the subject.

Pete Stanaitis
---------------