High Voltage Forum
Tesla coils => Dual Resonant Solid State Tesla coils (DRSSTC) => Topic started by: VNTC on July 22, 2019, 04:05:38 AM
-
Accessory:
-A coil can work OK on primary feedback mode
-An oscilloscope
Schedule of doing:
1- winding 1 turn of wire around the wire that primary current going through,
hook the probe of the oscilloscope on 2 terminal of that wire
image 1
2- take the L2/C2 out of their place
3- let the coil running on normal DC bus and short burst duration(20us) primary current can reached 500Apk or more depend DC bus and burst duration.
4- observe or take a picture the primary current wave ( at 1v/div setting on oscilloscope)
image 2
In this case the result is 9.5*5/8=5.9375us f1=168.42kHz
That is an safety measurement because the probe of oscilloscope not connect to the circuit
-
I added both threads to the list of useful information, thanks for sharing.