My 9MHz hfsstc

[曹靖]

I plan to create a new 9MHzhfsst silicon carbide MOS with the same frequency as Steve Ward, which has not yet arrived. I will continue to update the project progress and also explore the impact of coils with different frequencies on arc size under the same power input?

[NyaaX_X]

Wow. So that SiC MOSFET has it own internal TVS G-S protection diodes? Expect your new working. And maybe add QCW to this circuit like Steve Ward post in his youtube channel ?

哇. 這個SiC MOS管有內部TVS G-S保護二極體?期待你的新成品。並且未來可能給這個電路加上QCW，像Steve Ward在他的YT頻道裡展示的那樣?

PS. The source >

[曹靖]

I just received the SicMOSFET yesterday and couldn't wait to assemble the circuit. It's still waiting for debugging. Due to overshoot, several MOSFETs have already died

[曹靖]

Wow. So that SiC MOSFET has it own internal TVS G-S protection diodes? Expect your new working. And maybe add QCW to this circuit like Steve Ward post in his youtube channel ?

只做CW模式的～只是随便玩玩

[davekni]

I just received the SicMOSFET yesterday and couldn't wait to assemble the circuit. It's still waiting for debugging. Due to overshoot, several MOSFETs have already died

That's frustrating!  I'm presuming Vds overshoot, or is it Vgs?  In other words, are dead FETs shorted drain-to-source or gate-to-source (or both)?

[曹靖]

That's frustrating!  I'm presuming Vds overshoot, or is it Vgs?  In other words, are dead FETs shorted drain-to-source or gate-to-source (or both)?

Due to overshoot, both Vgs and Vds have been short circuited, and I was forced to change the resonance frequency of the secondary coil to 10MHz. This time, it seems that it is possible. Below are the yellow Vgs waveform and red Vds waveform of the machine at 800W input power. Of course, there is also a YouTube video link. https://youtube.com/shorts/R9L4JJ1jP5c?feature=share

[曹靖]

The input power has reached 1KW, and I used calcium sodium glass tubes, so the sodium yellow arc is quite eye-catching

[PowerTech]

Great result.
How much now is power supply voltage ?
At such high power level, there is significant interference to nearby electronic devices ?
How much approximately from 1kW power going to RF radiation ?
 I'm thinking about to don't have problems with government radio frequency control institution.

[曹靖]

Great result.
How much now is power supply voltage ?
At such high power level, there is significant interference to nearby electronic devices ?
How much approximately from 1kW power going to RF radiation ?
 I'm thinking about to don't have problems with government radio frequency control institution.

At present, the input voltage of 90V consumes 12A, and the efficiency is estimated to be over 90%. At present, there are no other electronic devices that have been damaged or interfered with, which is indeed very bad for the shortwave frequency band. The local radio department did not contact me, and high-power radio transmission is also illegal in China. However, due to the lack of transmitting antennas, most of the electromagnetic waves are absorbed by the walls, so the equipment will not be warned by relevant departments.

[cuteKaisa]

太成功了,曹师傅简直是天才