Author Topic: Moving to a new lab!  (Read 1984 times)

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Moving to a new lab!
« on: February 16, 2018, 08:55:47 AM »
Follow me as I move from my old small 10 sq.m. lab to a new 20 sq.m lab and with additional 20 sq.m work shop.

This is part 1 in a series of videos on moving out, moving in and setting up the new lab / work shop.

I am moving out of the apartment and into our own house, which has a room dedicated to the laboratory and a work shop for rough work.

« Last Edit: March 08, 2018, 08:16:47 PM by Mads Barnkob »
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 194
  • Karma: +7/-0
    • View Profile
Re: Moving to a new lab! (Part 1) Old basement lab tour and future projects
« Reply #1 on: February 16, 2018, 05:28:20 PM »
You really need more space :)

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 56
  • Karma: +0/-0
    • View Profile
Re: Moving to a new lab! (Part 1) Old basement lab tour and future projects
« Reply #2 on: February 16, 2018, 11:51:26 PM »
Will get the video link to watch on the faster internet.

But anyway, going from 10m2 to 20 is very good.

The maximum I have here is 18 I think. But after I crowded the space with transformer, old motors and some cheap tools, there is around 12m2 left.

Offline DaiKen

  • High Voltage Enthusiast
  • *
  • Posts: 31
  • Karma: +0/-0
    • View Profile
Re: Moving to a new lab! (Part 1) Old basement lab tour and future projects
« Reply #3 on: February 18, 2018, 10:39:57 AM »
Thanks for the nice video and good luck with moving all this stuff!

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #4 on: March 08, 2018, 08:17:07 PM »
Here you get a short glimpse of the new space for lab and work shop.

This is part 2 in a series of videos on moving out, moving in and setting up the new lab / work shop.

I am moving out of the apartment and into our own house, which has a room dedicated to the laboratory and a work shop for rough work.

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 56
  • Karma: +0/-0
    • View Profile
Re: Moving to a new lab!
« Reply #5 on: March 09, 2018, 05:17:54 AM »
Nice. You have more space there. I'm not the biggest fan of the gothic style, but it seems you are not too. :P

By the way, today I finished changing the light bulbs here for LED. Some warm colors, and some intense white for working areas. It really makes a lot of difference. The best one by far is the LED tube, they are just like "old" fluorescent lights. Maybe that can help you a lot. These new lights are a lot better to work at night. Now I can work for some time instead of wanting to take a nap due to the low lights I had before. When I first heard about these led lights I was like "mehhhhhh", but I have to admit some are really good.

I use very cheap shelves here. I would cut 0,5 - 1cm of the back legs, then they will lean back. Or you could screw the top of the shelve to the wall too.

70w halogen lamp.

https://s13.postimg.org/uouzevvlj/70w_Halogen.jpg

72w led tubes.

https://s13.postimg.org/bjrq54onb/72w_LED.jpg

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 194
  • Karma: +7/-0
    • View Profile
Re: Moving to a new lab!
« Reply #6 on: March 09, 2018, 03:59:17 PM »
Congratulations on the extra space!   A little unsolicited advice perhaps.  Keep space between shelves and boxes so you can check for critters that like to take residence in boxes and make sure there's no fire hazards, especially from leaking oil or solvents or lots of loose paper.   In the basement, keep the bottom shelves perhaps 15-30 cm off the ground in case there is flooding or standing water, being lowland Denmark I suppose that's a possibility.  Make sure the sump pump (basement well pump) is working, and maybe get one with a battery backup or replace the battery in case you lose power in a storm.

Dan


Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #7 on: March 11, 2018, 09:09:31 PM »
72 Watt LED is quite a lot of light, I bought four 14 Watt LED tubes for the garage, just to get some normal go through / find stuff light and then I will add some extra work lights at the table and machinery.

Good advice on the shelves/racks distance between them, instead of filling up a wall completely and there is no chance to see what is going on behind them.

There is no sump pump in this house, so we are battling moist in the basement by heating and ventilation. I will of-cause keep anything of special value above table height :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 194
  • Karma: +7/-0
    • View Profile
Re: Moving to a new lab!
« Reply #8 on: March 12, 2018, 12:35:21 AM »
If you keep all your valuable gear 30 cm or so off the floor, you can put a pump in the basement, and it might save you in the case of flooding.  Many of these pumps switch on automatically when they are in a few cm of water, so if you are not home, it will kick in and start pumping.  I have seen too much valuable stuff get ruined this way.

Dan

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #9 on: April 10, 2018, 09:49:34 PM »
Part 3 is online, it has been hard work to get the house ready for moving in and moving the lab/electronics stuff took way more time than imagined and there was endless amounts of stuff to move :)

http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline profdc9

  • High Voltage Technician
  • ***
  • Posts: 194
  • Karma: +7/-0
    • View Profile
Re: Moving to a new lab!
« Reply #10 on: April 11, 2018, 08:53:45 PM »
Let me know when you have your yard sale, I'd like to look over your collection of doomsday devices. :)

One question, why the name kaizerpowerelectronics?

Dan

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #11 on: April 15, 2018, 10:12:58 PM »
Let me know when you have your yard sale, I'd like to look over your collection of doomsday devices. :)

One question, why the name kaizerpowerelectronics?

Dan

Keep an eye on the sales subforum, if that ever happens ;)

As a young teenager I was a huge fan of this Norwegian band https://en.wikipedia.org/wiki/Kaizers_Orchestra and I went by the nickname Mads Kaizer, so when I wanted a domain for my electronics site, that was my first thought.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #12 on: June 05, 2018, 05:23:00 PM »
/>
Part 4 is here, after a long break due to business travel and more house building. I now have the work shop in a state where I can use my bench and the lab is getting populated soon.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 218
  • Karma: +5/-0
    • View Profile
Re: Moving to a new lab!
« Reply #13 on: June 05, 2018, 11:35:19 PM »
I like it that you have "Lightning and Power installed" - more appropriate than normal Lighting :P

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #14 on: November 08, 2018, 08:56:33 PM »
Seems that I forgot to post part 5 long ago, so here is both part 5 and part 6 :)

/>
/>
I am operational again!
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline the_anomaly

  • High Voltage Enthusiast
  • *
  • Posts: 24
  • Karma: +1/-0
    • View Profile
Re: Moving to a new lab!
« Reply #15 on: November 09, 2018, 01:42:06 PM »
Nice equipment!  How do you like the Rigol scope?  I was going to get one but I heard some mixed reviews.

Did you ever get the solar panels set up?

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #16 on: November 09, 2018, 02:08:54 PM »
I am very satisfied with the DS1054z, when I bought it on offer from Batronics at release there was no other alternatives with such a feature pack at 300€, bigger is of-course always better but at the end of the day, the display and speed it plenty for my work.

I picked up my solar cells from storage a couple of weeks ago, I am waiting for ordered connectors and to find some batteries for the bank. I got a charger from Victron, I will update the solar cell thread once I got some more to tell :)
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 218
  • Karma: +5/-0
    • View Profile
Re: Moving to a new lab!
« Reply #17 on: November 10, 2018, 04:51:13 PM »
Nice equipment!  How do you like the Rigol scope?  I was going to get one but I heard some mixed reviews.

Did you ever get the solar panels set up?

That Rigol was probably the best value low end scope up until a year or so ago, but I'd look at the 4 channel Siglent SDS1000X-E units as an alternate option now - have not used one but it sounds like there are some very significant improvements vs the Rigol for not much more money.

Offline Mads Barnkob

  • Administrator
  • High Voltage Senior
  • *****
  • Posts: 927
  • Karma: +11/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #18 on: November 11, 2018, 09:47:17 PM »
Nice equipment!  How do you like the Rigol scope?  I was going to get one but I heard some mixed reviews.

Did you ever get the solar panels set up?

That Rigol was probably the best value low end scope up until a year or so ago, but I'd look at the 4 channel Siglent SDS1000X-E units as an alternate option now - have not used one but it sounds like there are some very significant improvements vs the Rigol for not much more money.

After seeing the Rigol MSO5000 series on eevblog today, if you have 999$+239$ for waveform generator... thats one hell of a 4ch scope.
http://www.kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics

High Voltage Forum

Re: Moving to a new lab!
« Reply #18 on: November 11, 2018, 09:47:17 PM »

 


* Recent Topics and Posts

post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
Today at 03:45:43 AM
post Re: DRSSTC Driver Logic
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
March 24, 2019, 11:02:51 PM
post Re: DRSSTC Driver Logic
[Dual Resonant Solid State Tesla coils]
Laci
March 24, 2019, 10:43:55 PM
post Re: DRSSTC Driver Logic
[Dual Resonant Solid State Tesla coils]
Netzpfuscher
March 24, 2019, 09:54:54 PM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Mads Barnkob
March 24, 2019, 08:07:19 PM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
profdc9
March 24, 2019, 04:37:50 PM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
profdc9
March 24, 2019, 03:22:14 PM
post Re: DRSSTC Driver Logic
[Dual Resonant Solid State Tesla coils]
Laci
March 24, 2019, 02:59:48 PM
post Re: WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
FilipŠebík
March 24, 2019, 08:39:46 AM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
March 24, 2019, 08:35:33 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
flyrod
March 24, 2019, 04:07:24 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Thunderstruck
March 23, 2019, 10:07:54 PM
post Re: WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
Mads Barnkob
March 23, 2019, 04:07:55 PM
post WTS [EU]: UD2.7 thru hole pcb
[Sell / Buy / Trade]
Fumeaux
March 23, 2019, 02:12:48 PM
post Re: UD 2.7C Build
[Dual Resonant Solid State Tesla coils]
Thunderstruck
March 23, 2019, 08:03:58 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 23, 2019, 01:50:47 AM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Hydron
March 23, 2019, 12:11:10 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 22, 2019, 08:19:21 PM
post Re: Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
profdc9
March 22, 2019, 06:39:37 PM
post Chinese MOSFETS/IGBTS
[Solid state Tesla coils]
Fumeaux
March 22, 2019, 05:51:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
petespaco
March 22, 2019, 03:46:16 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
kamelryttarn
March 22, 2019, 11:25:19 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 22, 2019, 10:56:16 AM
post Re: looking for PCB creating software
[Printed Circuit Board]
Teravolt
March 22, 2019, 06:02:15 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 21, 2019, 11:04:48 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Hydron
March 21, 2019, 07:51:23 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
badpeter
March 21, 2019, 07:09:05 PM
post Re: looking for PCB creating software
[Printed Circuit Board]
kamelryttarn
March 21, 2019, 02:26:09 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Uspring
March 21, 2019, 11:57:53 AM
post Re: GDT Experiments
[Solid state Tesla coils]
Teravolt
March 20, 2019, 11:15:50 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Thunderstruck
March 20, 2019, 09:07:04 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 20, 2019, 05:18:07 PM
post Re: New small SSTC
[Solid state Tesla coils]
Bambinz
March 20, 2019, 03:52:15 PM
post Re: New small SSTC
[Solid state Tesla coils]
Mads Barnkob
March 20, 2019, 01:23:52 PM
post Re: GDT Experiments
[Solid state Tesla coils]
T3sl4co1l
March 20, 2019, 01:18:29 PM
post Re: GDT Experiments
[Solid state Tesla coils]
Mads Barnkob
March 20, 2019, 01:06:24 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 20, 2019, 01:00:46 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic circuits]
Mads Barnkob
March 20, 2019, 12:41:22 PM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 10:02:41 PM
post Re: Keep or throw away ?
[Beginners]
Hydron
March 19, 2019, 08:14:33 PM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 05:12:03 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Experimentonomen
March 19, 2019, 01:32:32 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General chatting]
Mads Barnkob
March 19, 2019, 12:20:34 PM
post Re: Strange gdt waveforms
[Dual Resonant Solid State Tesla coils]
Mads Barnkob
March 19, 2019, 12:15:22 PM
post Re: Which varnish to use to coat the Secondary?
[Solid state Tesla coils]
Mads Barnkob
March 19, 2019, 10:46:50 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 19, 2019, 09:11:09 AM
post Re: Keep or throw away ?
[Beginners]
Mads Barnkob
March 19, 2019, 08:24:31 AM
post Re: Keep or throw away ?
[Beginners]
Teravolt
March 19, 2019, 01:51:51 AM
post Re: Keep or throw away ?
[Beginners]
Thunderstruck
March 18, 2019, 09:56:42 PM
post Re: cute-qcw Tesla Coil
[Dual Resonant Solid State Tesla coils]
Weston
March 18, 2019, 07:55:52 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30