Author Topic: Repairing a pinhole in aluminum pot  (Read 576 times)

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 789
  • Karma: +23/-0
    • View Profile
Repairing a pinhole in aluminum pot
« on: July 31, 2024, 11:25:19 PM »
For decades I've used classic Hitachi rice cookers at home and work.   
One has been out of service because of a pinhole, as from pitting corrosion, in the thin aluminum pot. 
It's the one that looks better, and is 20% lighter than the other, so presumably newer.

It seems they don't make these any more. I can't get a replacement pot without buying a used cooker on Ebay.

Been meaning to ask here about repair options, before getting to work with "J-B Weld" (a 2-part epoxy resin putty) and a scrap of aluminum foil on inside surface.   

Pulse-arc welding, a TIG thing used in jewelry, is not accessible.

Aluminum soldering/brazing rods are shown in many online videos.  The filler metal would show on food side for about 1 square millimeter. Have any readers soldered/brazed on aluminum sheets with success?

I would consider using a solid aluminum rivet, hand-set with a small hammer.   Any hints about whether the joint could easily be leakproof, with or without some resinous stuff placed under the rivet head?

[edit] Maybe white tooth-cavity-filling resin could make a hard, durable repair. Could we expect it to stick as well as epoxy to a corroded aluminum surface?
« Last Edit: July 31, 2024, 11:43:45 PM by klugesmith »

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2953
  • Karma: +138/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Repairing a pinhole in aluminum pot
« Reply #1 on: August 01, 2024, 04:19:07 AM »
I haven't tried gluing aluminum in some time.  Back when I did some gluing to aluminum, epoxy didn't adhere well.  Had better luck with silicone rubber.

Also had some aluminum solder decades ago (from Radio Shack).  No idea what it was made with.  Worked with some effort and a hot iron.

I see aluminum "welding" rods at Harbor Freight.  SDS lists only aluminum, zinc, copper, and magnesium.  Other internet results mention aluminum and zinc as primary ingredients of aluminum brazing rods.  One mentioned tin as well.

Glanced through this video of someone soldering a hole in aluminum pop can.  Might be useful:
   
/>Mentions a specific brand of solder, "blue demon", which I'm guessing may be this stuff:
    https://www.grainger.com/product/BLUE-DEMON-Low-Temp-Alum-Zinc-Rod-225N83
SDS lists same four metals as in the Harbor Freight rods.

Good luck!
David Knierim

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 789
  • Karma: +23/-0
    • View Profile
Re: Repairing a pinhole in aluminum pot
« Reply #2 on: August 03, 2024, 11:38:33 PM »
Thanks for the encouragement. I found, from long ago, an unopened pack of "Bernzomatic AL-3" rods.
The label says they contain Al, Zn, Cu, no intentional Cd, and max 0.15% of other elements.
One appeared to make nice well-adhered puddles in a quick test on some Al scraps, freshly sanded and heated from far side with a refillable butane torch.  I didn't try a hot soldering iron, or a "precision" heat gun whose air temp knob goes up to 450 °C.  Note to noobs: I wear eye protection even for plain old soldering.  You never know when something will pop or splash.


I would not hesitate to use it for the pinhole repair.   But before the soldering test, I had an appointment with my dentist.
He had tooth-filling resin and curing light already out, and it took less than a minute to do the cavity in cooker pot.
It held up in a test boiling a little water to dryness.
Then held up cooking a batch of rice, where the long-idle thermal cutoff switch failed to open when water was all absorbed, so some rice got burned.
« Last Edit: August 04, 2024, 07:35:22 AM by klugesmith »

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2335
  • Karma: +74/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Repairing a pinhole in aluminum pot
« Reply #3 on: August 05, 2024, 07:45:27 AM »
I would not hesitate to use it for the pinhole repair.   But before the soldering test, I had an appointment with my dentist.
He had tooth-filling resin and curing light already out, and it took less than a minute to do the cavity in cooker pot.

He had tooth-filling resin and curing light already out, and it took less than a minute to do the cavity in cooker pot. Wins the price of the year for most unorthodox fix  ;D

Dentists are usually pretty cool about trying out random stuff. I once brought a newly assembled radiation/dose meter and he agreed to give it a few test shots with the x-ray :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 789
  • Karma: +23/-0
    • View Profile
Re: Repairing a pinhole in aluminum pot
« Reply #4 on: August 21, 2024, 10:20:32 PM »
Thank you, Mads.

I mixed up some J-B Weld from tubes first opened in 2005, and put a dab of that on outside of pot in a place with no hole.
That and the dental filling material are both still hard and well-adhered after two more cycles of rice cooking.
The dental stuff is now a light brown color, but still transmits light.  It's flush with metal surface on food side of pot.


In another visit, while waiting for dentist, I took pictures of a modern cordless curing light.
Its light pipe shows a retroreflective aspect when lit by phone camera flash.

High Voltage Forum

Re: Repairing a pinhole in aluminum pot
« Reply #4 on: August 21, 2024, 10:20:32 PM »

 


* Recent Topics and Posts

post Powering fluorescent lamps with Tesla coils
[Spark Gap Tesla Coils (SGTC)]
MechatEng2023
Today at 07:11:14 AM
post Re: High pressure sodium lamp phosphorescence
[Light, Lasers and Optics]
MechatEng2023
Today at 07:05:14 AM
post Re: Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 04:24:59 AM
post Re: Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PATWORK007
Today at 03:39:31 AM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
Today at 02:24:08 AM
post Re: Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:20:15 AM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:14:27 AM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 13, 2024, 11:21:59 PM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
October 13, 2024, 10:41:48 PM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
October 13, 2024, 08:54:14 PM
post FEEDBACK IH WORKING GREAT- HIGH POWER TEST RUN
[Induction Launchers, Coil Guns and Rails guns]
radbloke
October 13, 2024, 08:14:41 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 13, 2024, 07:03:05 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
Bert911
October 13, 2024, 02:29:31 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 13, 2024, 04:17:58 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 13, 2024, 01:40:19 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
buchtawill
October 12, 2024, 07:04:03 PM
post Universal Driver 1.3b doesn't oscillate
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PATWORK007
October 12, 2024, 10:09:14 AM
post Re: Tested and working feedback induction heater driver with current limiter
[Induction Launchers, Coil Guns and Rails guns]
radbloke
October 12, 2024, 05:45:55 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 11, 2024, 06:37:44 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 11, 2024, 05:13:41 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 11, 2024, 04:50:45 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 11, 2024, 04:43:06 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 11, 2024, 03:06:59 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 11, 2024, 10:56:03 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 11, 2024, 05:54:38 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 10, 2024, 08:46:26 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 10, 2024, 07:19:54 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 10, 2024, 03:29:45 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 10, 2024, 11:27:43 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 10, 2024, 11:09:29 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 10, 2024, 11:01:26 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 10, 2024, 05:55:50 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 09, 2024, 10:32:30 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 09, 2024, 05:44:25 AM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 08, 2024, 09:35:59 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 08, 2024, 09:33:40 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 08, 2024, 09:10:38 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 08, 2024, 08:48:43 PM
post Re: Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 08, 2024, 08:22:07 PM
post Re: Last cap in CW always blowing up
[Voltage Multipliers]
JoeBusic
October 08, 2024, 02:36:07 PM
post Coupling coefficient and some more Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
October 08, 2024, 07:46:14 AM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 08, 2024, 02:46:32 AM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 07, 2024, 07:13:58 PM
post Re: Shock box
[Electronic Circuits]
haversin
October 07, 2024, 05:45:41 PM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
October 07, 2024, 05:32:31 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 07, 2024, 04:01:51 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 07, 2024, 03:59:27 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
Late
October 07, 2024, 03:56:11 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 02:58:03 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 07, 2024, 02:09:29 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 07, 2024, 02:05:07 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Uspring
October 07, 2024, 01:51:38 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
October 07, 2024, 11:39:50 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 09:20:11 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 09:03:59 AM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 07, 2024, 08:52:23 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 06, 2024, 07:26:46 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 06, 2024, 07:17:56 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 06, 2024, 07:04:24 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 06, 2024, 06:56:45 PM
post Has anyone done a teardown of one of these "Induction Heaters for Auto Use"?
[Electronic Circuits]
petespaco
October 06, 2024, 04:53:46 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
Late
October 06, 2024, 04:23:47 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 06, 2024, 04:17:48 PM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
October 06, 2024, 02:59:35 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Uspring
October 06, 2024, 01:18:16 PM
post Re: Last cap in CW always blowing up
[Voltage Multipliers]
JoeBusic
October 05, 2024, 10:56:17 PM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 09:42:27 PM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 05, 2024, 09:35:43 PM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
October 05, 2024, 08:50:55 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 07:59:15 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 05, 2024, 05:35:00 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 05, 2024, 05:24:59 PM
post Crystal HFSSTC
[Solid State Tesla Coils (SSTC)]
Perolodzilla
October 05, 2024, 01:16:19 PM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 05, 2024, 09:14:48 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 06:45:42 AM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
October 05, 2024, 06:20:55 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 06:13:35 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 05, 2024, 05:53:22 AM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 05, 2024, 04:19:17 AM
post Re: current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
October 05, 2024, 12:15:59 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Continuum
October 04, 2024, 11:12:20 PM
post current transformers
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
October 04, 2024, 10:25:43 PM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 04, 2024, 07:15:58 PM
post Re: Shock box
[Electronic Circuits]
alan sailer
October 04, 2024, 02:58:01 AM
post Re: On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Continuum
October 04, 2024, 01:27:07 AM
post Re: Shock box
[Electronic Circuits]
haversin
October 04, 2024, 01:03:02 AM
post Re: Shock box
[Electronic Circuits]
alan sailer
October 04, 2024, 12:44:17 AM
post Shock box
[Electronic Circuits]
haversin
October 04, 2024, 12:21:09 AM
post Re: Bertran Model 205A-03R High Voltage Power Supply
[General Chat]
klugesmith
October 03, 2024, 07:38:36 AM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
haversin
October 03, 2024, 12:45:51 AM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
klugesmith
October 03, 2024, 12:15:29 AM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
haversin
October 02, 2024, 10:49:03 PM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
klugesmith
October 02, 2024, 06:27:22 PM
post On poles and detuning in QCW coils
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 02, 2024, 05:41:09 PM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
October 02, 2024, 05:23:18 PM
post Re: Tested and working feedback induction heater driver with current limiter
[Induction Launchers, Coil Guns and Rails guns]
radbloke
October 02, 2024, 05:57:37 AM
post Re: Tested and working feedback induction heater driver with current limiter
[Induction Launchers, Coil Guns and Rails guns]
davekni
October 02, 2024, 05:00:12 AM
post Re: MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 02, 2024, 03:01:15 AM
post MIDI Music Note Control for DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
October 01, 2024, 10:22:59 PM
post Re: An unexpected autotransformer
[Transformer (Ferrite Core)]
haversin
October 01, 2024, 06:04:57 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal