Author Topic: UD 2.7c "sawtooth" output  (Read 5764 times)

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #20 on: July 25, 2023, 08:03:46 PM »
That's the driver. It's powered by 24VAC. For "dry tests" the ODC is removed and the feedback is hooked up to the function generator.


I'm not too sure which jumper do you mean. Is it J4 or J6? J4 is open and the middle and lower pins are connected together for J6.

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #21 on: July 25, 2023, 08:10:44 PM »
I'm not too sure which jumper do you mean. Is it J4 or J6? J4 is open and the middle and lower pins are connected together for J6.
On the jumper J6 pins 1, 3 and 2, 4 or 3, 5 and 4, 6 have to be connected together.

In the pic it doesn't look like they are connected together.
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #22 on: July 25, 2023, 08:18:14 PM »
That's the driver. It's powered by 24VAC. For "dry tests" the ODC is removed and the feedback is hooked up to the function generator.


I'm not too sure which jumper do you mean. Is it J4 or J6? J4 is open and the middle and lower pins are connected together for J6.

Also i don't see any interrupter signal being fed in. Are you feeding in any for your dry tests?

Looking at the previously sent waveforms i suspect there's something wrong with the ultra fast comparator or some connection near it. Do you have another comparator you could put in to check of that is the issue?
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #23 on: July 25, 2023, 08:25:34 PM »
Yes, I forgot to mention it. The interrupter signal is fed in by a fiberoptic cable. I'm going to buy some new comparators soon to check if it makes any difference bun I'm quite sure it was the scope all the time.

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #24 on: July 25, 2023, 08:27:06 PM »
Yes, I forgot to mention it. The interrupter signal is fed in by a fiberoptic cable. I'm going to buy some new comparators soon to check if it makes any difference bun I'm quite sure it was the scope all the time.

How is the scope connected to the circuit and is the probe set to 10X or 1X?
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #25 on: July 25, 2023, 08:38:37 PM »
The probe is set to x1. I'm not too sure if it's a good thing but the circuit is floating due to the ringcore transformer I use as a supply so I can scope everything without worrying to blow something due to wroung ground connections.

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #26 on: July 25, 2023, 08:42:14 PM »
The probe is set to x1.
You should always keep your probe in 10X mode unless you're measuring very low voltages at low frequencies. In 10X mode the probe will also have a less of an effect on circuit. in 1X mode scope probe isn't rated up to the full bandwidth and voltage.

And was the ground lead connected to GND for all measurements?
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #27 on: July 25, 2023, 09:24:14 PM »
And was the ground lead connected to GND for all measurements?
no

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #28 on: July 25, 2023, 10:10:24 PM »
no
uhh it should have been connected. otherwise you have just one connection and u need both. for most measurements connect it to circuits negative terminal but about the output be careful. if its isolated then you should be able to connect the ground lead to one terminal and probe to other. just make sure the other ground lead isnt connected to anything
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #29 on: July 25, 2023, 10:14:21 PM »
I‘ll kep it in mind for the future. The problem I have right now is a probably damaged channel 1 on my scope :(

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #30 on: July 25, 2023, 10:22:10 PM »
likely just a probe or maybe even nothing at all. Have you tried connecting it to the scopes cal port for test?

And possibly the measurements looked like that because the ground lead of probe wasn't attached
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #31 on: July 25, 2023, 11:05:35 PM »
Both pobes don‘t work on ch1 but on ch2 non of them has any problems. I connected them to the callibration port to see in ch1 that the square wave goes up like it should be but then instantly ramps down back to 0V. Ch2 on the other hand works fine.

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #32 on: July 25, 2023, 11:35:07 PM »
Both pobes don‘t work on ch1 but on ch2 non of them has any problems. I connected them to the callibration port to see in ch1 that the square wave goes up like it should be but then instantly ramps down back to 0V. Ch2 on the other hand works fine.
Hmm does switching from 1x to 10x on probe change anything? Ofc not counting the total amplitude

If not then yea something is cooked inside scope. Could be bc u measured something that's highish voltage with probes in 1x mode
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Rafft

  • High Voltage Technician
  • ***
  • Posts: 148
  • Karma: +3/-0
  • Electronics Hobbyist - HV n00b - FPV Dr0n3 Pil0t
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #33 on: July 26, 2023, 01:18:43 AM »


power just UD circuit only.
« Last Edit: July 26, 2023, 05:30:28 PM by Rafft »
SGTC / SSTC / DR-SSTC / QCW

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #34 on: July 26, 2023, 07:58:57 AM »
Hmm does switching from 1x to 10x on probe change anything? Ofc not counting the total amplitude

If not then yea something is cooked inside scope. Could be bc u measured something that's highish voltage with probes in 1x mode
Switsching between x1 and x10 doesn‘t chandge the strange measurements. Strangely a sine wave is no problem at all but the amplitude and voltage measurements in general are off. There was a case in the past with a CT where there was a potential of overvoltage but if I shot it with ov, wouldn‘t it measure anything?

Offline Egg

  • High Voltage Enthusiast
  • *
  • Posts: 36
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #35 on: July 26, 2023, 10:42:15 AM »
Both pobes don‘t work on ch1 but on ch2 non of them has any problems. I connected them to the callibration port to see in ch1 that the square wave goes up like it should be but then instantly ramps down back to 0V. Ch2 on the other hand works fine.

I have the same problem with my oscilloscope. Both channels work but first channel reads -140/-150v rms at all times making measuring low voltages almost impossible. Calibrating does not help either.

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #36 on: July 26, 2023, 12:41:35 PM »
Did you also have a situation where the scope might have seen too much voltage?

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #37 on: July 26, 2023, 01:32:09 PM »
Switsching between x1 and x10 doesn‘t chandge the strange measurements. Strangely a sine wave is no problem at all but the amplitude and voltage measurements in general are off. There was a case in the past with a CT where there was a potential of overvoltage but if I shot it with ov, wouldn‘t it measure anything?

Yea seems like you have cooked something in the scope. For the future remember when you measure voltages in a CT always put a resistor in paralel with output. Something like a 10-100ohm resistor.

If you repeat all measurements of the circuit with the second channel in 10x mode do you still get a sawtooth wave on output?



edit - Also always keep your scope probe in 10X mode. Your scope is only rated to the max voltage and bandwidth in 10X mode and you're less likely to cook something with it.
« Last Edit: July 26, 2023, 04:06:42 PM by Late »
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #38 on: July 26, 2023, 11:26:09 PM »
I didn't had the time yet to remeasure everything but the output of the driver looks good. It has some spikes but it's a squarewave. The shot was done with no load whatsoever.


I talked to a friend of mine who has a lot of experience in the whole field and he mentioned that the "sawtooth" might look like a capacitor's discharge curve:


This would explain the strange signal that accures when the probe is hooked up to the calibratin port at the scope which puts out a 1kHz squarewave. There the discharge curves are even more visible.
« Last Edit: July 26, 2023, 11:31:27 PM by Felix M. »

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 55
  • Karma: +2/-0
    • View Profile
Re: UD 2.7c "sawtooth" output
« Reply #39 on: July 27, 2023, 12:15:39 AM »
I didn't had the time yet to remeasure everything but the output of the driver looks good. It has some spikes but it's a squarewave. The shot was done with no load whatsoever.

Yup the output looks good. It looks like its supposed to
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

High Voltage Forum

Re: UD 2.7c "sawtooth" output
« Reply #39 on: July 27, 2023, 12:15:39 AM »

 


* Recent Topics and Posts

post Re: Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
Today at 02:14:17 AM
post Re: Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 12, 2024, 11:04:57 PM
post Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
June 12, 2024, 10:23:08 PM
post Re: UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 12, 2024, 08:41:06 PM
post Re: UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 12, 2024, 07:53:31 PM
post Re: Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
haversin
June 12, 2024, 06:57:13 PM
post UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 12, 2024, 06:54:49 PM
post Re: Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
Mads Barnkob
June 12, 2024, 03:47:28 PM
post Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
vK
June 12, 2024, 03:42:18 AM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
davekni
June 12, 2024, 03:32:22 AM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 11, 2024, 11:05:49 PM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
June 11, 2024, 05:36:46 AM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
Twospoons
June 11, 2024, 12:29:31 AM
post Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 10, 2024, 11:05:55 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
June 10, 2024, 10:57:51 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 10, 2024, 08:08:04 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 10, 2024, 06:04:09 PM
post Sling Psychrometer
[Laboratories, Equipment and Tools]
klugesmith
June 10, 2024, 04:43:59 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 10, 2024, 03:35:28 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Jj
June 10, 2024, 01:36:41 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
Anders Mikkelsen
June 09, 2024, 05:44:29 PM
post Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
yourboi
June 09, 2024, 03:31:30 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Electronic Circuits]
NyaaX_X
June 09, 2024, 01:34:49 PM
post Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Electronic Circuits]
verliebt_in_neukölln17
June 09, 2024, 01:56:51 AM
post Re: Return of Electronics Flea Market in "Silicon Valley"
[Sell / Buy / Trade]
klugesmith
June 08, 2024, 06:06:25 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 08, 2024, 05:38:14 AM
post Interrupter for SSTC
[Beginners]
Simranjit
June 08, 2024, 12:47:47 AM
post Re: Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
Michelle_
June 07, 2024, 03:59:57 PM
post Re: Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
davekni
June 07, 2024, 06:42:26 AM
post Re: Space-X Starship test this week
[Science, Research and News In Other Fields Than Electronics]
MRMILSTAR
June 07, 2024, 05:08:00 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
davekni
June 07, 2024, 03:16:31 AM
post Re: Space-X Starship test this week
[Science, Research and News In Other Fields Than Electronics]
klugesmith
June 06, 2024, 11:37:20 PM
post Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
Simranjit
June 06, 2024, 11:20:23 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
June 06, 2024, 10:54:48 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 06, 2024, 05:17:02 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 06, 2024, 04:50:00 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
davekni
June 06, 2024, 04:00:52 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 06, 2024, 01:43:41 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 11:11:17 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Michelle_
June 05, 2024, 10:18:57 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 10:13:03 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 05, 2024, 09:29:18 PM
post Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 08:46:53 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Twospoons
June 05, 2024, 07:04:45 AM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Domo
June 05, 2024, 04:58:35 AM
post Re: Pearson current monitor model 1330 teardown (100kA)
[Laboratories, Equipment and Tools]
klugesmith
June 05, 2024, 01:42:04 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 04, 2024, 10:31:58 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
pete_dl
June 04, 2024, 08:08:28 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Twospoons
June 03, 2024, 11:13:26 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 03, 2024, 10:35:57 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 03, 2024, 05:51:05 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Domo
June 03, 2024, 07:41:41 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 03, 2024, 05:28:44 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 03, 2024, 05:02:19 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 03, 2024, 03:47:33 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 03, 2024, 02:23:58 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 03, 2024, 01:25:24 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 03, 2024, 01:08:47 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 02, 2024, 10:29:02 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 02, 2024, 10:02:45 PM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
davekni
June 02, 2024, 08:25:37 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 02, 2024, 04:51:58 PM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Michelle_
June 02, 2024, 04:44:30 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
MRMILSTAR
June 02, 2024, 03:25:11 PM
post APC Smart-UPS 1500VA Teardown
[Electronic Circuits]
Mads Barnkob
June 02, 2024, 01:36:11 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
pete_dl
June 02, 2024, 11:43:40 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 02, 2024, 08:49:11 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 02, 2024, 08:36:07 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 02, 2024, 12:41:50 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Benjamin Lockhart
June 01, 2024, 08:24:35 PM
post Pearson current monitor model 1330 teardown (100kA)
[Laboratories, Equipment and Tools]
Mads Barnkob
June 01, 2024, 08:22:28 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 01, 2024, 03:56:53 AM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
Terry
June 01, 2024, 12:03:50 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
May 31, 2024, 11:46:20 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 31, 2024, 06:13:59 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 31, 2024, 01:55:22 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 30, 2024, 11:57:49 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
May 30, 2024, 11:50:06 PM
post First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
May 30, 2024, 11:23:35 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
davekni
May 30, 2024, 10:43:06 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 30, 2024, 10:24:35 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 30, 2024, 06:10:04 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
Simranjit
May 30, 2024, 04:56:11 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
Michelle_
May 30, 2024, 04:48:05 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 30, 2024, 04:37:22 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
klugesmith
May 30, 2024, 04:16:31 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 30, 2024, 03:34:10 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
Simranjit
May 30, 2024, 02:53:50 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 30, 2024, 12:44:47 PM
post SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
Simranjit
May 30, 2024, 07:52:56 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 30, 2024, 07:07:53 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
May 30, 2024, 07:04:40 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 30, 2024, 05:16:50 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 30, 2024, 05:08:17 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
davekni
May 30, 2024, 04:29:30 AM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 30, 2024, 03:52:36 AM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
davekni
May 30, 2024, 03:47:12 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Benjamin Lockhart
May 30, 2024, 03:41:34 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 30, 2024, 03:27:28 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 29, 2024, 03:55:16 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal