Author Topic: Welcome new members, come say hello and tell a little about yourself :)  (Read 58772 times)

Offline Linda aka MethelinaPills

  • High Voltage Enthusiast
  • *
  • Posts: 6
  • Karma: +1/-0
  • ECLSS Engineer and laser enthusiast
    • View Profile
    • Linkedin Portfolio
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #180 on: June 18, 2023, 05:05:46 PM »
'Ola, noble and kind people of the community!
My name is Linda and im mostly a DIY-laser enthusiast :D But it needs a HV to feed so i make my small steps over the HV-world.
In the basic reality im a ECLSS worker and Game Designer. My hobby is electronics, ants, chemistry, DIY, PC-gaming and martial arts.




For now im workin' on the Laser PSU for my DIY Ruby laser:





And the ZVS in progress  ;)


Test flyback transformer with DIY 3D printed bobbin sec:9x1mm, 65kHz, 38v  ;D

It works, so i added a big flyback trans from TV to check the arc for proof of concept

At the end i will need to feed the greed of this little guy till 5kV:

...Via a new Flyback transformer from this core: hope it will work...









« Last Edit: June 18, 2023, 05:15:31 PM by Linda aka MethelinaPills »
Feel Free to Discord:
Linda#7591

Offline JTaddeo

  • High Voltage Enthusiast
  • *
  • Posts: 1
  • Karma: +1/-0
  • RF is black magic
    • View Profile
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #181 on: July 22, 2023, 02:27:59 PM »
Hello everyone I'm Jim with very likely a cliche introduction. I'm new around here but quite the "older" veteran in the wonderful world of electronics.

I've long had an interest in Tesla and his work (many others as well but...Nikola Tesla was one very interesting man, his work pioneering) and my current focus has turned towards the pancake coil.

I love reading and exploring old literature and technologies and I am definitely a hands on builder, tinkerer, and explorer. Many of my passions have been sitting on a shelf as my wife and I raised the children but now we have reached a place where the last will enter her junior year of college (chemistry major) and I'm about to play again. I have a pretty cool collection of devices and surplus parts, discrete components, and test gear. Recently I had the great fortune to inherit some HV capacitors, all of them are from the Condenser Products Corp. that were going to be "discarded" otherwise. Which, of course to my wife's dismay, I simply could not let happen.  ;D

I scored on:
  • 0.25 MFD 8KV "can"
  • 0.01 MFD 10KV Oil Filled
  • 0.001 MFD 20KV Oil Filled


Ancient but well kept, I wonder what their ESR's measure?

Professionally I am a Controls Engineer (I used to couldn't say it, but now I are one) which surely betrays a trait of "pack-ratting" all manners of geek looking stuff that very few people recognize let alone understand or have interests in. That of course, again much to the irritation of my gentler half, is OK with me. I will provide a good and stable environment for wayward devices of many types and test equipment, Ham Radio gear, and old motorcycle parts too....the list is looooong.   

I intend on continuing my explorations of impulse driven, spark gap and solid state, and broad banded excitation of resonant circuits and masses. One of my favorite "parlor tricks" has been a very interesting wireless electrolysis that I saw and experimented with on other forums in another life.

Below is a shot of 96 LED's in series running on single wire RF input, very little input power,  and just a few hundred volts...still, it's great fun (occasional, though not too frequent, RF burns aside)
 
Single wire broadband excitation of large LED loops...just for fun.

Don't do this at home boys and girls, I'm a licensed professional.

In any case, Hello again!....I'll be reading and looking at what you all have posted here...for now.

Best regards,

JT

   
« Last Edit: July 22, 2023, 04:54:51 PM by JTaddeo »
To date it has been my experience that there is NO free lunch, but there IS, however, abundance...

Offline Crated

  • High Voltage Enthusiast
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #182 on: September 07, 2023, 06:30:08 AM »
Guess I'll take a turn!

My name is Matthew, I finished an associates degree about 3 years ago and have been working as a computer tech at a school district since then.
I've been buying tools here and there, starting a few hobbies.

I do a bit of graphic designing, I've gotten a decent handle on 3d printing/3d modeling and have started a bit of blacksmithing. My endless curiosity has led me here as well.

I intend on going back to college at some point, but at the moment I'm getting certified for stuff here and there.

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2220
  • Karma: +68/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #183 on: September 09, 2023, 02:58:17 PM »
It is wonderful to see so many new members taking their time to say hello and showcase a bit. You are all ready for posting your projects, never wait until it is all done, there is so much help to get when posting the work in progress :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Download

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
    • Super Octopus: Tracing the evolution of British and American nuclear weapons design
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #184 on: September 22, 2023, 03:49:44 PM »
Hello everyone.

I used to frequent 4hv many years ago. Not sure what has happened there, but it seems quite dead now? Found this forum today and it seems quite lively, and I am glad to be here.

I got into HV stuff as a (probably too young) teen. I built a (terrible) SG Tesla Coil when I was 12 or 13 and then built a far nicer VTTC when I was 16 based on Steve's single 833A compact design. Said VTTC is currently in parts in a box in my shed, unused in about a decade now. But for some reason (probably because of being employed and having money now), I find myself in the scene again. My first project — sort of a litmus test to see how serious I am about getting into this again — is to rebuild my old VTTC into a presentable unit rather than the jury-rigged nonsense I ran with years back. After that I have some crazy idea to build a 5 or 10 kW VTTC from a transmitting triode. It's probably crazy, but aren't we all here?

My other hobby that might interest some people here is about all nuclear things. It currently looks at nuclear weapons design, focussing on the idea that a British nuclear device - codenamed Super Octopus - greatly interested the US and was extensively used in US nuclear weapons. I am currently writing a history paper on the topic and hope to get it published in a journal and am currently at the stage of "do I look for more info or run with what I have?". Hard choices. I also have a blog on it. I don't mind discussing the topic with those who are interested. I've looked at other nuclear topics as well and my thesis for my (unfinished) degree was looking at manufacturing challenges in advanced nuclear power.

I'll try dig up my old VTTC photos tomorrow.
Australian. My hobbies include photography, cooking, everything nuclear, and I recently got back into the hobby of spending lots of money on high voltage things!

My blog is about nuclear weapons. I am currently writing a paper on the topic. I don't mind chatting about it if we skip the basics.

Offline Benbmw

  • High Voltage Enthusiast
  • *
  • Posts: 23
  • Karma: +1/-0
    • View Profile
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #185 on: September 22, 2023, 07:43:55 PM »
Welcome Download!

I seem to be in a very similar boat as you, finding the HV hobby in my teens and wanting to return to it with more experience/resources.

Your nuclear hobby sounds interesting and I would love to read your blog and/or paper once released. I am currently riding the nuclear fusion startup wave that has high demand for pulsed power engineers. No background in anything nuclear before this though, so I am curious to learn tidbits of history along the way.

-Ben

Offline Download

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
    • Super Octopus: Tracing the evolution of British and American nuclear weapons design
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #186 on: September 23, 2023, 04:52:28 AM »
Welcome Download!

I seem to be in a very similar boat as you, finding the HV hobby in my teens and wanting to return to it with more experience/resources.

Your nuclear hobby sounds interesting and I would love to read your blog and/or paper once released. I am currently riding the nuclear fusion startup wave that has high demand for pulsed power engineers. No background in anything nuclear before this though, so I am curious to learn tidbits of history along the way.

-Ben

Blog is linked in my profile.

If you're interested in the early history of fusion, take a look at this paper: https://direct.mit.edu/jcws/article-abstract/23/2/133/101892/Ripple-An-Investigation-of-the-World-s-Most?redirectedFrom=fulltext
Australian. My hobbies include photography, cooking, everything nuclear, and I recently got back into the hobby of spending lots of money on high voltage things!

My blog is about nuclear weapons. I am currently writing a paper on the topic. I don't mind chatting about it if we skip the basics.

Offline Jhornel

  • High Voltage Enthusiast
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #187 on: September 23, 2023, 02:14:35 PM »
Hi everyone!

I am Jhornel from the Philippines and I really just love lighting and high voltage. I have been wanting to build my very first QCW Tesla Coil but I really do not know where to start and how to find the right drivers, etc. that can help me build one (like a guide, I guess.). I apologize if this is a dumb request but I am super excited to learn a lot from all of you and see your beautiful builds. I would really appreciate it if someone can help me how to start. Thank you!

Offline MechatEng2023

  • High Voltage Enthusiast
  • *
  • Posts: 12
  • Karma: +0/-0
    • View Profile
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #188 on: October 01, 2023, 04:52:09 PM »
I'm 22 years old now and 4th year mechatronics engineering student. My main hobby is high voltage experiments. I started this hobby when I was about 10 or 11 years old. You can watch some of my HV videos on my YT channel: https://www.youtube.com/@mernok2001/featured

Offline TXtesla

  • High Voltage Enthusiast
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #189 on: November 03, 2023, 01:08:33 PM »
I am TXtesla_HVF my back ground experience is in Oilfield electronics. I have built several Van de Graff generators. Working on building my first tesla coil. Reading the post and getting good education about what and what not.

High Voltage Forum

Re: Welcome new members, come say hello and tell a little about yourself :)
« Reply #189 on: November 03, 2023, 01:08:33 PM »

 


* Recent Topics and Posts

post New user hoping not to destroy too many IGBTs in 2024
[General Chat]
ae7b
Today at 06:53:52 AM
post Re: Smoothing capacitor questions on UD 2.7C
[Beginners]
Keybored
Today at 12:25:37 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
davekni
December 09, 2023, 09:47:04 PM
post Re: Small SSTC killing gate drivers
[Solid State Tesla Coils (SSTC)]
davekni
December 09, 2023, 09:03:11 PM
post Re: Basement Laboratory Renovation
[Laboratories, Equipment and Tools]
Mads Barnkob
December 09, 2023, 09:36:26 AM
post Re: Small SSTC killing gate drivers
[Solid State Tesla Coils (SSTC)]
Lucasww
December 09, 2023, 08:57:15 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
bobfrancis1980
December 09, 2023, 04:01:59 AM
post Re: Small SSTC killing gate drivers
[Solid State Tesla Coils (SSTC)]
davekni
December 09, 2023, 02:11:48 AM
post Re: Small SSTC killing gate drivers
[Solid State Tesla Coils (SSTC)]
Lucasww
December 09, 2023, 01:25:03 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
davekni
December 09, 2023, 12:51:37 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
bobfrancis1980
December 08, 2023, 10:38:26 PM
post Re: GDT magnetizing current
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 08, 2023, 09:53:45 PM
post Re: Small SSTC killing gate drivers
[Solid State Tesla Coils (SSTC)]
davekni
December 08, 2023, 08:55:43 PM
post Re: Smoothing capacitor questions on UD 2.7C
[Beginners]
davekni
December 08, 2023, 08:23:56 PM
post GDT magnetizing current
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
December 08, 2023, 06:58:25 AM
post Re: Smoothing capacitor questions on UD 2.7C
[Beginners]
Keybored
December 08, 2023, 01:51:32 AM
post Small SSTC killing gate drivers
[Solid State Tesla Coils (SSTC)]
Lucasww
December 07, 2023, 11:34:00 PM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
davekni
December 07, 2023, 04:18:45 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
bobfrancis1980
December 07, 2023, 01:13:07 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
bobfrancis1980
December 07, 2023, 12:14:38 AM
post Smoothing capacitor questions on UD 2.7C
[Beginners]
Keybored
December 06, 2023, 11:42:18 PM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
Twospoons
December 06, 2023, 10:45:55 PM
post Re: P5104 40kV 20MHz probes
[General Chat]
Mads Barnkob
December 06, 2023, 06:59:10 PM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
NyaaX_X
December 06, 2023, 06:14:30 AM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
davekni
December 06, 2023, 06:00:58 AM
post Re: Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
davekni
December 06, 2023, 05:57:09 AM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
NyaaX_X
December 06, 2023, 04:57:17 AM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
davekni
December 06, 2023, 04:31:42 AM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
NyaaX_X
December 06, 2023, 03:55:04 AM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
davekni
December 06, 2023, 03:31:04 AM
post Has anyone tried using series IGBT to control Marx gen firing rate?
[Voltage Multipliers]
bobfrancis1980
December 06, 2023, 12:46:43 AM
post Re: Is the UD2.7C under voltage lock out basically worthless?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
December 05, 2023, 10:15:22 PM
post Re: Is the UD2.7C under voltage lock out basically worthless?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
December 05, 2023, 02:28:17 PM
post Re: 2 Layer primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
December 05, 2023, 09:28:30 AM
post 2 Layer primary coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
December 05, 2023, 05:26:18 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 04, 2023, 05:06:19 AM
post Re: diy High voltage ignition coil
[Transformer (Ferrite Core)]
tazea
December 03, 2023, 11:14:29 PM
post Re: Segmented Primary Coil
[Spark Gap Tesla Coils (SGTC)]
Hysteresis
December 03, 2023, 02:29:50 PM
post Re: Primary to secondary arc flashover, how close can you keep the secondary?
[Solid State Tesla Coils (SSTC)]
nzoomed
December 03, 2023, 10:24:06 AM
post Re: P5104 40kV 20MHz probes
[General Chat]
FPS
December 03, 2023, 07:45:42 AM
post Re: diy High voltage ignition coil
[Transformer (Ferrite Core)]
ZakW
December 03, 2023, 07:19:21 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
December 03, 2023, 06:50:36 AM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
NyaaX_X
December 03, 2023, 03:31:21 AM
post Re: diy High voltage ignition coil
[Transformer (Ferrite Core)]
davekni
December 03, 2023, 02:44:37 AM
post Re: Segmented Primary Coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
December 02, 2023, 09:36:17 PM
post Re: Segmented Primary Coil
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
December 02, 2023, 08:58:37 PM
post Re: P5104 40kV 20MHz probes
[General Chat]
Mads Barnkob
December 02, 2023, 08:55:59 PM
post Segmented Primary Coil
[Spark Gap Tesla Coils (SGTC)]
tbbrune
December 02, 2023, 08:32:47 PM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
davekni
December 02, 2023, 07:28:16 PM
post Re: P5104 40kV 20MHz probes
[General Chat]
alan sailer
December 02, 2023, 07:13:21 PM
post Chain reactions
[High Speed Filming]
haversin
December 02, 2023, 06:20:03 PM
post Re: Try to build the 4MHz ClassE SSTC
[Solid State Tesla Coils (SSTC)]
NyaaX_X
December 02, 2023, 11:44:34 AM
post P5104 40kV 20MHz probes
[General Chat]
FPS
December 02, 2023, 10:15:01 AM
post Re: Problem with output with fullbridge sstc
[Solid State Tesla Coils (SSTC)]
Benjamin_collier
December 02, 2023, 01:19:40 AM
post diy High voltage ignition coil
[Transformer (Ferrite Core)]
tazea
December 01, 2023, 10:45:25 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2023, 08:48:38 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
December 01, 2023, 02:03:32 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2023, 06:14:43 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
December 01, 2023, 05:07:24 AM
post Re: Simple problem with JavaTC + Best connectors for quick swapping IGBTS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2023, 02:07:41 AM
post Re: Simple problem with JavaTC + Best connectors for quick swapping IGBTS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
December 01, 2023, 02:00:20 AM
post Re: Is the UD2.7C under voltage lock out basically worthless?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
December 01, 2023, 12:20:38 AM
post Is the UD2.7C under voltage lock out basically worthless?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
November 30, 2023, 11:14:16 PM
post Re: Simple problem with JavaTC + Best connectors for quick swapping IGBTS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2023, 10:05:26 PM
post Re: Feedback current transformer doesn't work
[Solid State Tesla Coils (SSTC)]
davekni
November 30, 2023, 10:02:33 PM
post Simple problem with JavaTC + Best connectors for quick swapping IGBTS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
yourboi
November 30, 2023, 09:23:53 PM
post Re: Feedback current transformer doesn't work
[Solid State Tesla Coils (SSTC)]
TiagoBS
November 30, 2023, 07:38:21 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
November 30, 2023, 06:10:34 PM
post Re: Primary to secondary arc flashover, how close can you keep the secondary?
[Solid State Tesla Coils (SSTC)]
Benjamin Lockhart
November 30, 2023, 06:21:15 AM
post Re: Primary to secondary arc flashover, how close can you keep the secondary?
[Solid State Tesla Coils (SSTC)]
davekni
November 30, 2023, 06:01:17 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2023, 05:50:53 AM
post Re: Feedback current transformer doesn't work
[Solid State Tesla Coils (SSTC)]
davekni
November 30, 2023, 05:34:32 AM
post Small Coil Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
November 30, 2023, 02:23:01 AM
post Re: GU-81 vs. GU-81M
[Vacuum Tube Tesla Coils (VTTC)]
thehay95
November 30, 2023, 12:40:36 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
November 30, 2023, 12:38:37 AM
post Primary to secondary arc flashover, how close can you keep the secondary?
[Solid State Tesla Coils (SSTC)]
nzoomed
November 30, 2023, 12:26:10 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
November 30, 2023, 12:03:30 AM
post Re: Feedback current transformer doesn't work
[Solid State Tesla Coils (SSTC)]
TiagoBS
November 29, 2023, 08:12:27 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 29, 2023, 06:32:03 AM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
November 27, 2023, 03:12:43 PM
post Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
November 27, 2023, 09:07:43 AM
post Re: Feedback on new freewheeling driver schematic
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 27, 2023, 12:27:13 AM
post Re: Feedback on new freewheeling driver schematic
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FilipŠebík
November 26, 2023, 11:18:29 PM
post First part of my bipolar Tesla coil project and future improvements
[Spark Gap Tesla Coils (SGTC)]
MechatEng2023
November 26, 2023, 10:07:55 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 26, 2023, 09:57:50 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
November 26, 2023, 08:04:56 PM
post Re: Choosing a Capacitor for a 30hz Marx generator
[Voltage Multipliers]
bobfrancis1980
November 26, 2023, 07:53:47 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
November 26, 2023, 05:14:20 AM
post Re: WTS/WTT: T520-2 - Micrometals core, MO, USA
[Sell / Buy / Trade]
davekni
November 25, 2023, 08:04:05 PM
post Re: Single Photon Dual Slit Demonstartion
[Detection, Counting and Measurements]
alan sailer
November 25, 2023, 07:16:02 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
coilerer
November 25, 2023, 01:05:56 PM
post Re: WTS/WTT: T520-2 - Micrometals core, MO, USA
[Sell / Buy / Trade]
coilerer
November 25, 2023, 01:02:05 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 25, 2023, 04:29:13 AM
post Re: Choosing a Capacitor for a 30hz Marx generator
[Voltage Multipliers]
davekni
November 25, 2023, 04:15:02 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
klugesmith
November 24, 2023, 11:57:26 PM
post Re: Single Photon Dual Slit Demonstartion
[Detection, Counting and Measurements]
klugesmith
November 24, 2023, 11:26:58 PM
post Re: DRSSTC low power testing killing IGBTs
[Dual Resonant Solid State Tesla coils (DRSSTC)]
FonziDaytona
November 24, 2023, 11:26:04 PM
post Re: Choosing a Capacitor for a 30hz Marx generator
[Voltage Multipliers]
bobfrancis1980
November 24, 2023, 10:08:43 PM
post ABB DCS400 - 900A / 522kW DC Motor Drive Teardown
[Electronic Circuits]
Mads Barnkob
November 24, 2023, 07:33:46 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Netzpfuscher
November 24, 2023, 08:57:36 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal