Author Topic: CORE FOR GDT AND CT  (Read 4468 times)

Offline prabhatkumar

  • High Voltage Experimenter
  • **
  • Posts: 99
  • Karma: +0/-0
    • View Profile
CORE FOR GDT AND CT
« on: April 13, 2020, 03:02:15 PM »
Hey there everyone !! I had successfully made my first sstc and I am very pleased with it's performance . I know I am not making big arcs but then this was only a learning experience and I had it. But during the lockdown I was thinking to study more on drsstc and then also choose a core for the CT, GDT and capacitors for the mmc. I don't want to make like deadly arcs which are 4 feet long . My secondary is only 10 inches tall and has a diameter of around 4.2 inches. It has got 1400 turns. In real life ,I get a resonating frequency of 238.5 kHz. I will run the coil without the toroid.
So now for the main question , I was reading the forums for the core for GDT and CT , and found that mads replied that he uses this :
https://www.mouser.in/ProductDetail/EPCOS-TDK/B64290L674X830/?qs=sGAEpiMZZMt1hubY80%2Fs8DEvGx1xc7EcUsoMlWTaffs=
I also found that many people use this core:
https://in.element14.com/ferroxcube/tn32-19-13-3e25/ferrite-core-toroid-3e25/dp/3057008
I also found another toroid from ferroxcube which has a different coating ( epoxy ), compared to the above cores . These two cores have the same material 3e-25 . But strangely though the coated one has a bigger diameter and a higher Al value still being a little cheaper from the other . I don't know a lot about the cores so please enlighten me on this . I would prefer to order the cheaper one with epoxy coating as I could save like 4 usd on 20 pieces . Also will the high Al of 7.3 uH of this core be suitable for the gdt. Link for the 2nd ferroxcube core
https://in.element14.com/ferroxcube/tx36-23-15-3e25/ferrite-core-toroid-3e25/dp/3057021
Also sorry for the inconvenience as the prices are mentioned in INR and not in USD

As a standard rule of thumb ( as far as I know ) , the Al value should be above 5000 as mads has said in his drsstc design guide.
Now I could also source any of the above cores , the epcos being a little bit more expensive because it has got a slightly larger diameter, I am thinking on the ferroxocube one.
But while browsing I found a page on digikey where there is a large number of cores given with materials like N30, T-35, T-65 etc
Now I would go for the core diameter and the Al value mentioned aside each core , it is right or also do we need to look for the other properties of the core . If yes then please can someone share a link to a page or briefly explain the main difference between the types like T-35, T-38 etc . I will attach the link to that page which has the different cores given.
https://www.digikey.com/catalog/en/partgroup/toroid-core-type/23563
THANKS !!
« Last Edit: April 13, 2020, 03:12:42 PM by prabhatkumar »

Offline ritaismyconscience

  • High Voltage Technician
  • ***
  • Posts: 164
  • Karma: +4/-0
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #1 on: April 14, 2020, 01:06:51 AM »
The second core is thicker (has more cross sectional area) so its inductance should be higher. Both of them should work though.

Offline prabhatkumar

  • High Voltage Experimenter
  • **
  • Posts: 99
  • Karma: +0/-0
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #2 on: April 14, 2020, 04:59:40 AM »
Second one as in which core please mention the name ??

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 721
  • Karma: +22/-0
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #3 on: April 14, 2020, 05:10:37 AM »
3E25 is one of many ferrite formula standards.  Others have different permeability and saturation flux density.  Permeability and high frequency loss are temperature-dependent functions of Bmax.

You can get the single-turn inductance directly from core dimensions and permeability. 
Those determine its magnetic reluctance (ampere turns per weber), whose inverse is the single turn inductance.  Might help to get an understanding how the core variables affect you.

For example, Let's consider that TN32-19-13-3E25. 

Put 1 turn of wire through it, carrying 1 ampere of current.
The toroid's effective length (of magnetic flux path) is 76 mm.
With 1 ampere of MMF spread uniformly along that path, the H value is I/l = 1.0/0.076 = 0.076 amperes/meter.  YOu can convert that to oersteds if you want.

The relative permability of 3E25 is given as 5500.  I'm no expert, but that seem like a nice high value for a ferrite.   Flux density in the core is B = H * u0 & u(relative), where u0 is always 4e-7*pi.  So B = 0.0909 teslas (909 gausses), well below saturation.

The toroid's effective area (of magnetic flux path) is given as 76.5 mm^2.
Total flux is the product of B and flux path area. 
In SI units, 0.091 * 7.65e-5 = 6.96e-6 webers = 6.96 uWb.

If the current were changing at 1 ampere per second, the flux would change at 6.96 uWb per second, automatically inducing 6.96 uV per turn.  Hence the inductance is 6.96 uH.
Verstehen Sie?

« Last Edit: April 14, 2020, 05:16:41 AM by klugesmith »

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #4 on: April 14, 2020, 06:45:19 AM »
"Second one as in which core please mention the name ??"  I think that refers to the TX36/23/15-3E25 core you listed as being a bit cheaper and having an epoxy coating.  It looks good to me.  The link you reference lists inductance as 7.39uH / turn^2, which is above Mads' recommended minimum of 5000nH (5uH).  For your 238kHz frequency, even a 2-turn GDT would avoid saturation.  (I'd recommend a few more turns to reduce magnetization current.)
David Knierim

Offline prabhatkumar

  • High Voltage Experimenter
  • **
  • Posts: 99
  • Karma: +0/-0
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #5 on: April 14, 2020, 07:46:19 AM »
Thanks a lot klugesmith and davekni for your kind replies. Well I really appreciate how klugesmith taught how to calculate the inductance per turn just by formulas. And it's a shame for me as I still don't understand that level of details of electronics. And davekni also thanks for your advice on the core.
And something more bad also that I can't source anything from element 14 since they require a GST no so individuals and hobbyists like me can't buy straight from them . I will be updating this thread when I buy the cores from some other seller locally and trying it out ( the local vendors don't have the ferroxcube cores , they have only epcos cores like N-30 and T-38  and maybe few others ). Thanks everyone for now !

Offline Didik

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
  • Newbie
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #6 on: August 04, 2022, 08:08:09 AM »
"Second one as in which core please mention the name ??"  I think that refers to the TX36/23/15-3E25 core you listed as being a bit cheaper and having an epoxy coating.  It looks good to me.  The link you reference lists inductance as 7.39uH / turn^2, which is above Mads' recommended minimum of 5000nH (5uH).  For your 238kHz frequency, even a 2-turn GDT would avoid saturation.  (I'd recommend a few more turns to reduce magnetization current.)


hi guys.. i'm also just learning a small drsstc. which one do you think is more suitable for ferrite? number 1. outer diameter 40mm thick 15mm.and one winding of wire produces 5.2uH no.2.outer diameter 20mm thick 8mm and one winding wire produces 20uH.

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #7 on: August 05, 2022, 06:25:39 AM »
40mm core would be better in general.  Smaller 20mm one would be fine for a high frequency coil, say >200kHz.  Could help if making a small coil where build size matters.  Detailed calculation requires knowing core saturation flux density and core area, number of turns that fit, etc.
David Knierim

Offline Rafft

  • High Voltage Technician
  • ***
  • Posts: 148
  • Karma: +3/-0
  • Electronics Hobbyist - HV n00b - FPV Dr0n3 Pil0t
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #8 on: August 05, 2022, 09:56:26 AM »
David

time to introduce the generic 'vga' gdt  ;) with its standardized dimensions, im pretty sure the specs wont have large differences from other manufacturers.

im sure the op could find a few
SGTC / SSTC / DR-SSTC / QCW

Offline Didik

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
  • Newbie
    • View Profile
Re: CORE FOR GDT AND CT
« Reply #9 on: August 05, 2022, 11:59:58 AM »
.thanks , i bought it right away and started building it , your guides are all very valuable to me , i plan to build sstc using seccataco interrupter , and maybe my secondary will run at 450khz without top load . as reference of ferrite core i mentioned above , i have to how many turns to turn for a full bridge gate drive (irf 460)

High Voltage Forum

Re: CORE FOR GDT AND CT
« Reply #9 on: August 05, 2022, 11:59:58 AM »

 


* Recent Topics and Posts

post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Jj
Today at 03:09:41 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
Today at 01:53:07 AM
post Re: UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:07:30 AM
post Re: UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
Today at 12:45:22 AM
post Re: UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 14, 2024, 10:41:03 PM
post UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
June 14, 2024, 10:20:00 PM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 09:47:48 PM
post Fronius IG Plus 2LT-2 6kW Solar Inverter Teardown
[Electronic Circuits]
Mads Barnkob
June 14, 2024, 09:40:33 PM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 14, 2024, 07:44:12 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 05:21:55 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 14, 2024, 03:24:43 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 03:13:44 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 14, 2024, 02:27:06 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 01:56:58 AM
post Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 13, 2024, 11:21:46 PM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 13, 2024, 08:50:56 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
June 13, 2024, 07:43:37 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
petespaco
June 13, 2024, 04:52:08 PM
post Re: Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
June 13, 2024, 02:14:17 AM
post Re: Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 12, 2024, 11:04:57 PM
post Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
June 12, 2024, 10:23:08 PM
post Re: UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 12, 2024, 08:41:06 PM
post Re: UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 12, 2024, 07:53:31 PM
post Re: Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
haversin
June 12, 2024, 06:57:13 PM
post UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 12, 2024, 06:54:49 PM
post Re: Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
Mads Barnkob
June 12, 2024, 03:47:28 PM
post Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
vK
June 12, 2024, 03:42:18 AM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
davekni
June 12, 2024, 03:32:22 AM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 11, 2024, 11:05:49 PM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
June 11, 2024, 05:36:46 AM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
Twospoons
June 11, 2024, 12:29:31 AM
post Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 10, 2024, 11:05:55 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
June 10, 2024, 10:57:51 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 10, 2024, 08:08:04 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 10, 2024, 06:04:09 PM
post Sling Psychrometer
[Laboratories, Equipment and Tools]
klugesmith
June 10, 2024, 04:43:59 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 10, 2024, 03:35:28 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Jj
June 10, 2024, 01:36:41 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
Anders Mikkelsen
June 09, 2024, 05:44:29 PM
post Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
yourboi
June 09, 2024, 03:31:30 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
NyaaX_X
June 09, 2024, 01:34:49 PM
post Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 09, 2024, 01:56:51 AM
post Re: Return of Electronics Flea Market in "Silicon Valley"
[Sell / Buy / Trade]
klugesmith
June 08, 2024, 06:06:25 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 08, 2024, 05:38:14 AM
post Interrupter for SSTC
[Beginners]
Simranjit
June 08, 2024, 12:47:47 AM
post Re: Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
Michelle_
June 07, 2024, 03:59:57 PM
post Re: Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
davekni
June 07, 2024, 06:42:26 AM
post Re: Space-X Starship test this week
[Science, Research and News In Other Fields Than Electronics]
MRMILSTAR
June 07, 2024, 05:08:00 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
davekni
June 07, 2024, 03:16:31 AM
post Re: Space-X Starship test this week
[Science, Research and News In Other Fields Than Electronics]
klugesmith
June 06, 2024, 11:37:20 PM
post Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
Simranjit
June 06, 2024, 11:20:23 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
June 06, 2024, 10:54:48 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 06, 2024, 05:17:02 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 06, 2024, 04:50:00 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
davekni
June 06, 2024, 04:00:52 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 06, 2024, 01:43:41 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 11:11:17 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Michelle_
June 05, 2024, 10:18:57 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 10:13:03 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 05, 2024, 09:29:18 PM
post Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 08:46:53 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Twospoons
June 05, 2024, 07:04:45 AM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Domo
June 05, 2024, 04:58:35 AM
post Re: Pearson current monitor model 1330 teardown (100kA)
[Laboratories, Equipment and Tools]
klugesmith
June 05, 2024, 01:42:04 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 04, 2024, 10:31:58 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
pete_dl
June 04, 2024, 08:08:28 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Twospoons
June 03, 2024, 11:13:26 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 03, 2024, 10:35:57 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 03, 2024, 05:51:05 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Domo
June 03, 2024, 07:41:41 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 03, 2024, 05:28:44 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 03, 2024, 05:02:19 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 03, 2024, 03:47:33 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 03, 2024, 02:23:58 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 03, 2024, 01:25:24 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 03, 2024, 01:08:47 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 02, 2024, 10:29:02 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 02, 2024, 10:02:45 PM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
davekni
June 02, 2024, 08:25:37 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 02, 2024, 04:51:58 PM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Michelle_
June 02, 2024, 04:44:30 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
MRMILSTAR
June 02, 2024, 03:25:11 PM
post APC Smart-UPS 1500VA Teardown
[Electronic Circuits]
Mads Barnkob
June 02, 2024, 01:36:11 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
pete_dl
June 02, 2024, 11:43:40 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 02, 2024, 08:49:11 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 02, 2024, 08:36:07 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 02, 2024, 12:41:50 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Benjamin Lockhart
June 01, 2024, 08:24:35 PM
post Pearson current monitor model 1330 teardown (100kA)
[Laboratories, Equipment and Tools]
Mads Barnkob
June 01, 2024, 08:22:28 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 01, 2024, 03:56:53 AM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
Terry
June 01, 2024, 12:03:50 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
May 31, 2024, 11:46:20 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 31, 2024, 06:13:59 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 31, 2024, 01:55:22 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 30, 2024, 11:57:49 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
May 30, 2024, 11:50:06 PM
post First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
May 30, 2024, 11:23:35 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
davekni
May 30, 2024, 10:43:06 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 30, 2024, 10:24:35 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 30, 2024, 06:10:04 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal