Author Topic: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)  (Read 1545 times)

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
Moving Sale, selling all the components not yet in projects. FIRST COME FIRST SERVE (as defined by first payer not first message)

Photos below, ask for specific part numbers/ details.

would rather sell it all Intra-US flat rate but willing to go international if you're willing to pay for shipping fees.

Everything is as is, make offers I want it gone quickly and cheaply, expect: shipping cost + less than what you can find for a price on Ebay.

Other notes:
- would like to keep things together - induction heater caps with coil - igbts 2 or 4 at a time (Will give bulk discounts)
- The two full bridges were used for QCW coils, both have snubbers and dual GDT's for phase shift - one will come with a bus cap and mmc
- Coils were all hand-wound (with drill) then coated in epoxy or varnish, both small ones are 38 guage and used for QCW, fairly robust but cant remember resonant freq and dont have anything setup to test it. Expect small errors / imperfections


 (couldn't figure out how to attach all the photos so I turned them into a pdf doc) https://publuu.com/flip-book/656143/1462681


Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 70
  • Karma: +4/-0
    • View Profile
Hello,
Do you still have any of the igbts left? If yes what bricks do you have and for how much are you willing to sell them?
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
I still have all bricks left. Willing to sell for 40$ a piece plus shipping. I have CM300's, 400's and some others that I can get the part number for if you're interested. Realizing the pdf doesn't work, attached photos.

Thanks,
Davis




Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
Since the photos didnt load the first time, re-attached.






 [ Invalid Attachment ]

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 70
  • Karma: +4/-0
    • View Profile
some others that I can get the part number for if you're interested.

What's the part numbers of those white bricks you have? And if they are different how much do you have of each?
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
Part number is FF400R06KE3 (all bricks the same). They are 600V 500A.

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
Since there is no interest and I need most of this gone, will be giving away the magnetrons, coils, some of the capacitors, and most of the IGBT's away for free. First come first serve

Offline noahsarc

  • High Voltage Enthusiast
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Are the blue pulse caps 1200v .33uf? If so, they're like the ones I use and I'm needing about 20 more to finish my drsstc mmc.

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
I believe they are, ill make sure tonight

Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 70
  • Karma: +4/-0
    • View Profile
I still have all bricks left. Willing to sell for 40$ a piece plus shipping. I have CM300's, 400's and some others that I can get the part number for if you're interested. Realizing the pdf doesn't work, attached photos.

Thanks,
Davis



Do you have any bricks that are 1200V rated? If yes I'd be interested in those.
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
The three cm400's are 1200v. the mystery brown bricks may be as well, they have no part number so I cannot say for sure.

Offline dbach

  • High Voltage Enthusiast
  • *
  • Posts: 42
  • Karma: +0/-0
    • View Profile
They are likely one of these


Offline Late

  • High Voltage Experimenter
  • **
  • Posts: 70
  • Karma: +4/-0
    • View Profile
The three cm400's are 1200v. the mystery brown bricks may be as well, they have no part number so I cannot say for sure.

How many of the cm400's do you have? and how much are you willing to let them go for?
Hi, my name is Patriks and I'm from Latvia. I'm interesting electronics, especially power electronics and high voltage. I also make content on YouTube showing my journey in the awesome world of High Voltage.

YouTube: LateNightProjects

High Voltage Forum


 


* Recent Topics and Posts

post Re: Single board for SSTC and DRSSTC operation
[Solid State Tesla Coils (SSTC)]
davekni
December 01, 2024, 10:45:49 PM
post Re: My DRSSTC1 rebuild / Strange GDT ringing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 01, 2024, 09:53:13 PM
post Re: My DRSSTC1 rebuild / Strange GDT ringing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
LoFoTroFo
December 01, 2024, 03:42:44 PM
post Re: Last cap in CW always blowing up
[Voltage Multipliers]
JoeBusic
December 01, 2024, 03:30:50 PM
post Scientific Atlanta (Cisco) 1 GHz Combiner and PSU Teardown
[Electronic Circuits]
Mads Barnkob
December 01, 2024, 11:43:09 AM
post GU-81M Hartley Driven VTTC
[Vacuum Tube Tesla Coils (VTTC)]
janno288
December 01, 2024, 10:46:59 AM
post Single board for SSTC and DRSSTC operation
[Solid State Tesla Coils (SSTC)]
Simranjit
November 30, 2024, 09:10:38 PM
post Re: My DRSSTC1 rebuild / Strange GDT ringing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2024, 07:29:22 PM
post My DRSSTC1 rebuild / Strange GDT ringing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
LoFoTroFo
November 30, 2024, 01:47:58 PM
post Re: Many Multiple Mini Capacitor
[Dual Resonant Solid State Tesla coils (DRSSTC)]
rikkitikkitavi
November 29, 2024, 02:10:44 PM
post Re: Many Multiple Mini Capacitor
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 28, 2024, 09:34:29 PM
post Many Multiple Mini Capacitor
[Dual Resonant Solid State Tesla coils (DRSSTC)]
rikkitikkitavi
November 28, 2024, 07:52:42 PM
post Re: Oscilloscope recommendation for SSTC?
[Solid State Tesla Coils (SSTC)]
Simranjit
November 26, 2024, 11:34:05 PM
post Re: The evolution of a solid state Tesla coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
November 25, 2024, 01:03:46 AM
post GU-81M VTTC 2.7MHz Help
[Vacuum Tube Tesla Coils (VTTC)]
janno288
November 24, 2024, 01:53:22 PM
post Re: My SSTC's IGBT's blow up when toroid is added
[Solid State Tesla Coils (SSTC)]
AstRii
November 21, 2024, 07:17:16 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
November 20, 2024, 12:11:18 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
November 19, 2024, 05:41:27 PM
post Re: Testing and teardown of a commercial induction heater
[Electronic Circuits]
Anders Mikkelsen
November 19, 2024, 01:33:48 PM
post Re: Testing and teardown of a commercial induction heater
[Electronic Circuits]
DashApple
November 19, 2024, 08:02:30 AM
post Re: First DRSSTC, Full Bridge PCB & IGBT Selection question.
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 19, 2024, 05:31:47 AM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
November 19, 2024, 02:33:42 AM
post Re: Testing and teardown of a commercial induction heater
[Electronic Circuits]
dejuli2
November 18, 2024, 11:19:28 PM
post Re: First DRSSTC, Full Bridge PCB & IGBT Selection question.
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
November 18, 2024, 08:43:20 PM
post Re: Testing and teardown of a commercial induction heater
[Electronic Circuits]
DashApple
November 18, 2024, 06:07:11 PM
post Re: Is intentional overlap in the secondary theoretically possible?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
MinuteMylar
November 18, 2024, 05:04:09 PM
post Re: First DRSSTC, Full Bridge PCB & IGBT Selection question.
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Beggernator.
November 18, 2024, 12:17:41 PM
post Re: Testing and teardown of a commercial induction heater
[Electronic Circuits]
dejuli2
November 18, 2024, 09:25:38 AM
post Re: First DRSSTC, Full Bridge PCB & IGBT Selection question.
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 18, 2024, 01:09:10 AM
post Re: 160mm DRSSTC project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
paulsimik
November 17, 2024, 11:36:52 PM
post Re: 160mm DRSSTC project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
November 17, 2024, 10:28:23 PM
post Re: 160mm DRSSTC project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
November 17, 2024, 10:13:44 PM
post Re: IGBT Module / Brick integrity (BSM200GB120DLC) - Help
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
November 17, 2024, 09:15:31 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal