Author Topic: Looking for a good ZVS circuit  (Read 999 times)

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Looking for a good ZVS circuit
« on: July 28, 2024, 07:10:41 PM »
I require a ZVS circuit to use as a transformer driver, up to 1800W (60V 30A max).

I'd saved the attached schematics; it was from prominent members here, but I cannot remember where specifically they were saved from.

I realise I can buy one from Aliexpress, but I'd like a good base to play with and modify. What would be the most suitable circuit to fulfil this need? What changed could be made to achieve say 60V input - 20kHz output? Preferably something that'd work over a good voltage range.

I did try to make this one https://www.schematix.co.nz/forum/how-to-s/1-4kw-induction-heater but I failed, both MOSFETS just lock on and i have no idea why.

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #1 on: July 28, 2024, 07:19:24 PM »
This is the failed one, the capacitors are mounted underneath. I used terminal blocks so I could swap out MOSFETS, inductors and capacitorsm while this isn't ideal it shouldn't affect its function to that extent, should it?

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2963
  • Karma: +140/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #2 on: July 29, 2024, 02:14:00 AM »
Quote
I'd saved the attached schematics; it was from prominent members here, but I cannot remember where specifically they were saved from.
That's one of my older ZVS oscillator versions.  Keeps gate pull-up resistor power dissipation low, but does not solve the startup issue that most ZVS oscillator (Mazzilli oscillator) circuits have.  Standard "solution" is to apply DC power rapidly, as in a DC switch on power supply output.  I have other past posts where I thought I'd solved that startup issue, but was just having luck, not a true reliable solution.

The one reliable (at least so far for multiple users) solution is to apply gate power prior to applying voltage to power inductors feeding output.  That way neither supply needs to ramp up quickly.

Other solution I've used is to turn on main inductor power first, then switch on gate power rapidly.  I use this method for switching on and off using logic control.  Not a universal solution, but works in at least some cases.

BTW, I have one other solution that I haven't tested yet.  That's to use depletion-mode FETs for feedback instead of diodes.

Quote
This is the failed one, the capacitors are mounted underneath. I used terminal blocks so I could swap out MOSFETS, inductors and capacitorsm while this isn't ideal it shouldn't affect its function to that extent, should it?
Image shows 9V and 14V on FET source leads.  Sources are connected to 0V.  Implies ECB and/or FET connector blocks are damaged.
« Last Edit: July 29, 2024, 02:15:47 AM by davekni »
David Knierim

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #3 on: July 29, 2024, 11:31:16 AM »
I had two of them made via PCBWay, but they both have the same fault, just locks on 24V at both outputs. Circuit picture and schematic pdf is attached. The other is a bit more even at the MOSFETS (G/D/S - 12V/24V/10V) on both sides, but acts the same.

Yeh I have a 3 premade Aliexpress ZVS and they all have the problem of one side locking on if it's not switched via a mechanical jolt. The other attachments are ways I was looking to prevent that.

Offline petespaco

  • High Voltage Engineer
  • ****
  • Posts: 285
  • Karma: +12/-0
    • View Profile
    • French Creek Valley Activities
Re: Looking for a good ZVS circuit
« Reply #4 on: July 29, 2024, 11:47:55 PM »
Quote
Yeh I have a 3 premade Aliexpress ZVS and they all have the problem of one side locking on if it's not switched via a mechanical jolt.

What are you using for a power supply?  I don't know anything about the circuits in your first post, but I do know that you will need a power supply that can deliver at least 25 amperes or more for the 1000 watt "premade Aliexpress ZVS" that use 2 IRFP260N Mosfets.
Like this one:
https://www.aliexpress.us/item/2251832672195220.html

Also, make sure that your power supply is not set for current limiting below its max. capability.  If the power supply voltage drops much below about 12 volts, you will have problems.

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2963
  • Karma: +140/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #5 on: July 31, 2024, 05:16:19 AM »
Your circuit diagram clearly shows FET sources connected to ground (0V).  Your ECB must have an issue such as missing ground plane connections.

U1 regulator is likely too low current to power 100 ohm gate pull-up resistors.

FETs are obsolete 900V parts.  Not likely to work for this simple ZVS oscillator circuit due to high on resistance and likely high gate capacitance.

Not familiar with your PFET part either.  Can it handle sufficient current?  Can it handle high power dissipation during slow turn-on of your circuit?
David Knierim

Offline FPS

  • High Voltage Experimenter
  • **
  • Posts: 54
  • Karma: +0/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #6 on: July 31, 2024, 09:42:47 PM »
Petespaco, the Aliexpress ZVS modules available all work perfectly well, running off a 48V battery through a 0-48V 24A buck converter. I just require a good "base circuit" to modify and play with.

Dave sorry for the confusion but that circuit isn't mine, rather it's just one that I'd saved for inspiration. I'm not sure if this circuit is a made circuit or just a proposed one.

 I guess IXTH140P10T/IXFH140N10T and the 2 x IRFP4668PBF would be suitable FET replacements.

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2963
  • Karma: +140/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #7 on: August 01, 2024, 03:32:28 AM »
Quote
Dave sorry for the confusion but that circuit isn't mine, rather it's just one that I'd saved for inspiration. I'm not sure if this circuit is a made circuit or just a proposed one.
No confusion.  You made it clear that you'd copied it from some previous post.
Yes, it is one I've made.  Does work and drastically reduces gate pull-up resistor power.  However, still requires rapid application of supply voltage as with simpler ZVS circuits.
David Knierim

Offline radbloke

  • High Voltage Enthusiast
  • *
  • Posts: 19
  • Karma: +3/-0
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #8 on: August 01, 2024, 05:35:49 AM »
I made a ZVS which I’m directly driving the primary coil of a DRSSTC at resonance. Using 1/2 wave rectified mains, we get great ramped output. I have worked on this with Jerry Miller of ArcAngel Tesla Coil fame and we have put together a PCB for which I can give you a link to the Gerber files. The PCB has been tested and works great. The primary resonance starts when 12V gate voltage is applied. Then the ramps start when mains is added via a variac. Here is a link:
https://teslascience.wordpress.com/cw-tesla-coil-running-directly-off-a-zvs-driver/

« Last Edit: August 01, 2024, 05:38:46 AM by radbloke »

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2963
  • Karma: +140/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Looking for a good ZVS circuit
« Reply #9 on: August 01, 2024, 07:13:35 PM »
Quote
I made a ZVS which I’m directly driving the primary coil of a DRSSTC at resonance. Using 1/2 wave rectified mains, we get great ramped output. I have worked on this with Jerry Miller of ArcAngel Tesla Coil fame and we have put together a PCB for which I can give you a link to the Gerber files. The PCB has been tested and works great. The primary resonance starts when 12V gate voltage is applied. Then the ramps start when mains is added via a variac.
Key point relevant for this topic is last two sentences above.  Applying gate power before main power is a reliable way to get these ZVS oscillator circuits to start oscillating.

radbloke:  Your coil would be good as its own topic under DRSSTC category.  I have other thoughts and questions, but don't want to clutter up this thread with an unrelated project.
David Knierim

Offline AstRii

  • High Voltage Engineer
  • ****
  • Posts: 278
  • Karma: +9/-0
  • Czech Technical University in Prague
    • View Profile
    • UHVlab - Tesla Coils | High Voltage | Education
Re: Looking for a good ZVS circuit
« Reply #10 on: August 01, 2024, 09:54:54 PM »
U1 regulator is likely too low current to power 100 ohm gate pull-up resistors.

Just to clarify, the circuit shown on the schematic is mine first try at high power ZVS driver. https://www.uhvlab.org/zvs-driver

The U1 regulator was sufficient to power the Gates, but from what I remember the circuit was running pretty low frequency of ~50kHz. These TO-220 package linear regulators can deliver plenty of current, but need to be cooled well. For Vcc>30V, I had to replace the LM317 with discrete regulator made with a TO-247 package transistor on a big heatsink.

FETs are obsolete 900V parts.  Not likely to work for this simple ZVS oscillator circuit due to high on resistance and likely high gate capacitance.

Indeed, I was working with what I had laying around, at input current of over 40A the circuit was latching up and didn't work.

Not familiar with your PFET part either.  Can it handle sufficient current?  Can it handle high power dissipation during slow turn-on of your circuit?

For input currents of 20-40A I ended up using 4 of those in parallel on a heatsink.

I need to find some time to put all of this information to the website..

Beside all of this, the circuit has never failed me to start-up reliably at various loads and input voltages.
« Last Edit: August 01, 2024, 09:57:25 PM by AstRii »
Bc. Marek Novotny
Czech Republic, Czech Technical University in Prague
www.uhvlab.org

High Voltage Forum

Re: Looking for a good ZVS circuit
« Reply #10 on: August 01, 2024, 09:54:54 PM »

 


* Recent Topics and Posts

post Re: is this blocking cap nessary
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
Today at 02:25:54 AM
post is this blocking cap nessary
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
Today at 02:14:33 AM
post Re: High Voltage High Current Supply Ideas
[General Chat]
klugesmith
November 01, 2024, 09:38:08 PM
post Re: My SSTC's mosfets blow up when toroid is added
[Solid State Tesla Coils (SSTC)]
Frantisek
November 01, 2024, 02:37:57 PM
post Re: High Voltage High Current Supply Ideas
[General Chat]
huntergroundmind
November 01, 2024, 02:00:15 PM
post Re: DIY X-RAY generator made of eBay parts
[X-ray]
inanium
November 01, 2024, 07:58:44 AM
post Re: Proper capacitance size
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 01, 2024, 04:16:16 AM
post Re: Proper capacitance size
[Spark Gap Tesla Coils (SGTC)]
Benjamin Lockhart
October 31, 2024, 09:54:55 PM
post Re: Proper capacitance size
[Spark Gap Tesla Coils (SGTC)]
Hysteresis
October 31, 2024, 09:34:24 PM
post Proper capacitance size
[Spark Gap Tesla Coils (SGTC)]
BibberCoils
October 31, 2024, 06:46:32 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 31, 2024, 02:06:00 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
Late
October 31, 2024, 07:32:50 AM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 30, 2024, 08:12:44 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 30, 2024, 08:05:46 PM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 30, 2024, 07:19:07 PM
post Re: Induction heater safety
[Electronic Circuits]
petespaco
October 30, 2024, 03:16:41 PM
post Varying Frequency of A slayer exciter
[Solid State Tesla Coils (SSTC)]
vvs2000
October 30, 2024, 02:43:01 PM
post Re: Induction heater safety
[Electronic Circuits]
rikkitikkitavi
October 30, 2024, 12:45:19 PM
post Re: High Voltage High Current Supply Ideas
[General Chat]
rikkitikkitavi
October 30, 2024, 08:17:10 AM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
nzoomed
October 30, 2024, 07:47:59 AM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
damion
October 30, 2024, 12:50:31 AM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 29, 2024, 11:18:56 PM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
nzoomed
October 29, 2024, 10:34:44 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 29, 2024, 06:40:34 PM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 29, 2024, 06:15:51 PM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
nzoomed
October 29, 2024, 10:07:32 AM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 29, 2024, 01:57:49 AM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
nzoomed
October 28, 2024, 10:27:13 PM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 28, 2024, 07:17:39 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
October 28, 2024, 10:04:46 AM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
Late
October 28, 2024, 06:48:45 AM
post Re: Induction heater safety
[Electronic Circuits]
davekni
October 28, 2024, 04:18:04 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 28, 2024, 04:12:35 AM
post Re: Induction heater safety
[Electronic Circuits]
thaumatichthys
October 28, 2024, 12:16:47 AM
post Re: Enamel on secondary breaking down?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
nzoomed
October 27, 2024, 10:36:34 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
October 27, 2024, 06:33:55 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
betalab99
October 27, 2024, 06:05:04 PM
post Re: My SSTC's mosfets blow up when toroid is added
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
October 27, 2024, 05:32:16 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 27, 2024, 02:07:38 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 27, 2024, 12:51:21 PM
post IGBT Gate Drive Transformer (GDT) Design, Construction and Test
[Electronic Circuits]
Mads Barnkob
October 27, 2024, 11:38:24 AM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 27, 2024, 06:24:25 AM
post My SSTC's mosfets blow up when toroid is added
[Solid State Tesla Coils (SSTC)]
Frantisek
October 26, 2024, 08:49:05 PM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
October 26, 2024, 07:49:37 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 26, 2024, 03:51:05 PM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
noahsarc
October 26, 2024, 03:46:13 PM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 25, 2024, 11:18:22 PM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 25, 2024, 11:13:29 PM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
October 25, 2024, 10:52:23 PM
post Re: Triodes in the 5 to 10 kW range?
[Vacuum Tube Tesla Coils (VTTC)]
Avenger
October 25, 2024, 09:05:37 PM
post Re: My first QCW
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mathieu thm
October 25, 2024, 07:46:41 PM
post Re: Induction heater safety
[Electronic Circuits]
rikkitikkitavi
October 25, 2024, 11:07:20 AM
post SSTC USB interrupter based on Raspberry Pi Pico
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AdamRozdrazewski
October 25, 2024, 10:28:43 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 25, 2024, 06:26:52 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 25, 2024, 05:53:02 AM
post Re: Induction heater safety
[Electronic Circuits]
davekni
October 25, 2024, 05:23:14 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 25, 2024, 05:17:02 AM
post Re: Induction heater safety
[Electronic Circuits]
petespaco
October 25, 2024, 04:40:47 AM
post Re: Triodes in the 5 to 10 kW range?
[Vacuum Tube Tesla Coils (VTTC)]
unrealcrafter2
October 25, 2024, 01:23:27 AM
post Re: [WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)
[Sell / Buy / Trade]
dbach
October 25, 2024, 01:17:18 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 25, 2024, 01:14:28 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 25, 2024, 12:32:31 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 24, 2024, 08:21:32 PM
post Re: Steve's schematic can apply the TC4422 chip
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Glad_Yard
October 24, 2024, 08:05:34 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 24, 2024, 04:56:50 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 24, 2024, 04:48:31 AM
post Re: DIY X-RAY generator made of eBay parts
[X-ray]
zgoode
October 24, 2024, 12:44:43 AM
post Re: Flyback speaker - Help adjusting scope waves and gate voltage
[Transformer (Ferrite Core)]
klugesmith
October 23, 2024, 08:44:01 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
October 23, 2024, 05:57:48 PM
post How to send waveform generator output to high voltage?
[General Chat]
kenw232
October 23, 2024, 05:02:59 PM
post Re: Question about phase lead when tuning the primary
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 23, 2024, 08:04:42 AM
post Induction heater safety
[Electronic Circuits]
thaumatichthys
October 23, 2024, 07:29:51 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 23, 2024, 05:39:57 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 23, 2024, 05:16:00 AM
post Re: Flyback speaker - Help adjusting scope waves and gate voltage
[Transformer (Ferrite Core)]
davekni
October 23, 2024, 05:04:51 AM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 23, 2024, 03:17:58 AM
post Re: Flyback speaker - Help adjusting scope waves and gate voltage
[Transformer (Ferrite Core)]
TiagoBS
October 23, 2024, 12:55:44 AM
post Re: High Voltage High Current Supply Ideas
[General Chat]
klugesmith
October 23, 2024, 12:13:11 AM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
October 22, 2024, 11:52:30 PM
post High Voltage High Current Supply Ideas
[General Chat]
hmour
October 22, 2024, 11:00:58 PM
post Re: Free 1-HP VFD's if you act fast
[Sell / Buy / Trade]
klugesmith
October 22, 2024, 08:15:15 PM
post Re: Flyback speaker - Help adjusting scope waves and gate voltage
[Transformer (Ferrite Core)]
klugesmith
October 22, 2024, 08:01:49 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
October 22, 2024, 07:35:19 PM
post Flyback speaker - Help adjusting scope waves and gate voltage
[Transformer (Ferrite Core)]
TiagoBS
October 22, 2024, 03:48:17 PM
post Re: Question about phase lead when tuning the primary
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 22, 2024, 01:43:58 PM
post Question about phase lead when tuning the primary
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
October 22, 2024, 06:32:49 AM
post Re: Triodes in the 5 to 10 kW range?
[Vacuum Tube Tesla Coils (VTTC)]
Avenger
October 22, 2024, 04:31:04 AM
post Re: "LightningStorm" VTTC project
[Vacuum Tube Tesla Coils (VTTC)]
Avenger
October 22, 2024, 04:21:41 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
October 22, 2024, 02:33:13 AM
post Parrallax Propeller Microcontrollers.
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Patrick
October 22, 2024, 01:01:00 AM
post Re: Issue with Tesla Coil
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
October 21, 2024, 09:33:00 PM
post Re: Small Phase change build R600a
[General Chat]
klugesmith
October 21, 2024, 09:32:31 PM
post Issue with Tesla Coil
[Solid State Tesla Coils (SSTC)]
ashvathvv
October 21, 2024, 09:47:59 AM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GeorgeTsak
October 21, 2024, 12:36:43 AM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GeorgeTsak
October 21, 2024, 12:30:57 AM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
October 20, 2024, 11:53:29 PM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GeorgeTsak
October 20, 2024, 11:45:26 PM
post Re: DRSSTC Main Capacitors Topology
[Dual Resonant Solid State Tesla coils (DRSSTC)]
klugesmith
October 20, 2024, 11:12:40 PM
post Re: I'm looking for some guidance for a tesla coil build.
[Solid State Tesla Coils (SSTC)]
Matt71
October 20, 2024, 11:11:13 PM
post Re: I'm looking for some guidance for a tesla coil build.
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
October 20, 2024, 09:34:52 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal